Similar Questions

• Shop TV - how to set up WiFi?

  Can someone, please?

  Where the TV store set up my wireless to work?

  I have internet wifi and I would use on TV store.
  In manuals, I've read that I can stream the content from my PC, but do not know how to set up on the TV StorE.

  You have this TV store?
  http://www.Toshiba-multimedia.com/store-TV-serie/TV/

  The unit cannot be connected to the WLan. It supports HDMI port for you is to connect this HDD LCD directly. Also, you can use the USB port to connect the HARD drive to the USB laptop s. But WLan is not supported.

• Satellite A300 - how to set up WiFi draft N?

  Hi all new to the forum so Hello.

  My father just bought a Satellite A300 with Vista, which I'm trying to set up for him.
  I can't get the wireless to connect to 11n only 11g. I tried on both routers that I managed to connect my suburb to @ 11n.

  Under Advanced settings in the device, the option of Wireless Manager, it does not list 11n anywhere, it lists all of the combinations of 11A, 11b, and 11g but not 11n!

  Any help pointers appreciated!

  Best regards, Steve

  What is the exact model of your Satellite A300 code?

  And are you really sure that your Satellite A300 supports draft N? Did you check that?
  The fact is that not all Satellite A300 supports the new draft N speed.

  To me that sounds like it's your laptop doesn't support draft N and if that were the case, you should try to update the driver WLAN from your laptop.
  You can find it on the page of Toshiba.

• How to create a wifi Hotspot on your Window Vista?

  I surfed the Internet on how to create a Wifi Hotspot on Windows Vista Edition Home Premium, but nothing works...

  They show an option on the create an Ad-hoc connection after creating "activate Internet sharing, but all it by creating no option appears on the window."

  Hey

  Try these steps to create an access point in Windows Vista
  
  Step 1: Plug the Ethernet cable into one of the laptops.
  Step 2 - on the laptop you plugged in, press Windows Start button and open "Control Panel", go to "Network and Internet" and then go into "network and sharing Center."
  Step 3 - Choose "Set up a connection or network" and choose to create an ad - hoc network.
  Step 4: configure your network name and password WEP2 to protect.
  Step 5 - have the second search for laptop for wifi stations.
  Step 6 - ask them to choose the one with the name that you created, and enter the password you used.
  Step 7 - two laptops should now be able to use internet safely.

  Bravo!

• How to get a WiFi acct

  How to set up a Wi - Fi so grandson login account can use Nook

  Hello

  First, you will need to contact the Support of corner because this isn't a Windows product. They
  should have all the information you need to connect the Nook to any WiFi installation.
  Of course, you can contact your local Barnes & Noble.

  Nook - Support
  http://www.barnesandnoble.com/u/nook-support/379003184/

  Do you have any sort of internet access where the meal should now be put in place? If
  so and not WiFi check internet and computer service provider local or other stores
  who sell routers.

  This is for Windows however the Nook requires similar.

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=uXoLLvpJmjn

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• What different manual wifi vs wifi-protected setup

  I manually configure my wifi router.  When I turn on the MAC filtering, if gives me a warning that I can not use the Installer "wifi-protected.

  (1) how different manual wifi vs wifi-protected setup?

  (2) why is it using a manual configuration with the installation of wifi protected lockout (green list) MAC filtering?

  Thank you

  Ed S.

  Hi edspyhill09. Yes, it will disable Wifi protected setup because you try to filter the Mac addresses of the devices you want to connect to your network. Only the mac addresses that are listed can connect to your network so it defeats the purpose of having the WiFi enable protected configuration. WiFi protected setup allows users to connect multiple devices to the network and activate encryption of the data by pressing a button which is most of the time on the front panel, or some of it is in the rear panel of the WPS. But WPS does not apply to all devices because some gadgets are not able, only devices that are capable of WPS can take advantage of the WPS feature. Manual WiFi is the classic method to connect to your wifi network. You find the ssid network name and connect to him, if he will ask for a password, then just type the password and voila! You are now connected to your wifi network. I hope this helps you!

• PLE400, PLW400 and WIFI Protected Setup network printer problems

  Hello

  Well, I have a router Linksys EA4500 with the PLE400 and PLW400 wireless Extenders wireless installed in my house. I put extenders using the utility-Cisco Powerline AV following the directions (same keyword static, PLW400 password entered in) and has increased the range of my router effectively. However, since I installed the PLE400 and the PLW400 I can't get WIFI Protected Setup to work on any of my wireless printers. I have two wireless printers Brother HL-2270DW who stopped working when I installed the extension and cannot be connected to the router, since then I use the WIFI Protected Setup. What the devil?

  I pressed the buttons to reset for 10 seconds on the PLE400 and the PLW400 and then set them to the top and still had the problem. Then I thought that maybe there are any available firmware updates. And there are so I updated the firmware on the PLE400 and the PLW400. Now, everything works fine. >.

• Web interface of WRT120N show WiFi Protected Setup message repeatedly

  We have a WRT120N already configured and used for 2-3 years, which recently began displaying a message asking me to press the Wi - Fi Protected Setup button on the device. While in this State, work DHCP and wireless connection settings remain the same. It seems that the internet connection works if the router was not in that State when turned on, but not if the router was in this state when it is started.

  A few weeks ago, he did something where the wireless connection on my laptop would display Wi - Fi Protected Setup instead of WPA2 Personal as security, and then the connection would drop after a short period. Turning on the device, and then turn that would set, but does not necessarily solve the current problem. It happened a few times, but not more recently.

  The device is out of range, then the WiFi Protected Setup button has not been pushed back. Before this problem came up, I had downloaded a firmware update, but not him have not applied because the router is difficult to access, and now I'm worried that the device could be unusable if I try to do the update.

  I'm guessing that maybe it's a physical failure due to the humid climate here. Any ideas? Thanks for any help.

  Hard reset the router and reconfigure from scratch.  Once completed and verified working updated the firmware, hard reset and reconfigure back once again.

• How to set up an account for another user of my PC (Windows Vista) and give its right of administrator to download the program

  My daughter helped me to set up an account to my own PC with password protection. Please indicate how to set up another account for someone and give it the administrator right to download the program.

  There is information about the configuration of the accounts here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-understanding-user-accounts

• How to set up the Office remotely between two pc in different countries

  Hi, I just want to know how to use Remote Desktop between PC Windows 7 in different countries...

  I just tried Windows remote assistance but it take too long to set up first help me post the invitation file and the key to past and then I download the file and open it with Windows Remote Assistance and then copy the access code and enter it in the text box vacuum... and blablablabla

  I have seen a lot of video on how to set up remote desktop for always as when I want to use remote desktop, just ask the user on the other computer and connect it
  How can I do
  Thank you

  * and what is Remote Desktop connection software in windows 7? (next to the Windows Remote Assistance) 

  
  
  looking for help

  First of all know what version of Windows 7 is running on the computer you want to access remote/control. Go to the Start button and type winver in the search window. Windows will report to the version in a pop-up window on your desktop.

  ***********************************

  Assuming that the computer is running Windows 7 Ultimate or Pro...

  The main steps are...

  • Activate [DRC] Remote Desktop on Windows 7 Ultimate DRC PC host.
  • If the login ID DRC on the Windows 7 Ultimate DRC host PC is not an administrator, and then add the user to the remote desktop users group. Don't forget the DRC connection user ID are local on the host Windows 7 Ultimate DRC PC not the DRC PC client.
  • Make sure that there is an exception in the Windows Firewall, or any third-party firewall on the Windows 7 Ultimate DRC host PC.
  • If the host Windows 7 Ultimate DRC PC is behind a router make sure that TCP Port 3389 is transferred to the LAN IP (static is preferable) of Windows 7 Ultimate DRC host PC.

  You can test TCP Port 3389 port through your router forwarding by going to the http://www.canyouseeme.org test site. For help setting up through any router port forwarding, go to the PortForward.com site for help. Ignore references to UDP Port 3389.

  http://PortForward.com/English/applications/port_forwarding/Remote_Desktop/Remote_Desktopindex.htm

  Test call Windows 7 Ultimate DRC host PC from another PC or laptop computer on your local network using its LAN IP address (static is preferable).

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  To call from a remote location using the public IP address of the router to the PC host of Windows 7 Ultimate DRC is behind or a full domain name [FQDN] of DynDNS (which I assume that you have already configured).

  Its highly recommended that you use Network Level Authentication [KLA] If you connect remotely from a Windows 7, Vista or XP SP3/SP2 client.

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html#SP3

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/host-UseNLA.jpg

  http://theillustratednetwork.MVPs.org/screenshots/RDC-NLAandServerAuth/ClienttoServer-UseServerAuth.jpg

  Make sure that you use the latest version of the client if your connection from a client computer to Vista or XP SP3/SP2. Windows 7 includes the new RDC client software.

  http://support.Microsoft.com/kb/969084

  General help written for Vista, but close enough to Win 7...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/RDP6ConfigRecommendations.html

  MSFT Win 7 DRC help pages...

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  ***************************************

  If the remote computer runs Windows 7 Home Premium...

  Windows Live Mesh 2011 remote connections works well for the access/remote control of a computer Windows 7 Home Premium. It gives you a nice Remote Desktop display type of the Office from remote computers.

  http://explore.live.com/Windows-Live-2011-system-requirements

  You can use a web browser to access without installing any software, other than an ActiveX control, on the remote client or install Live Mesh on the client. Your choice.

  http://explore.live.com/Windows-Live-Mesh-Remote-Desktop-using?OS=Mac

  http://explore.live.com/Windows-Live-mesh-devices-remote-connections-what-UI

  If you use Live Mesh Remote Connections I suggest to create a Live ID limited account type that does not include an e-mail account. I have install a limited Live ID I use only to connect to some Live Mesh remote connections to computers I want / access control.

  https://accountservices.passport.NET/ppnetworkhome.SRF?VV=1200&mkt=en-us&LC=1033

  You can, if you wish, also use an existing Live ID or create a new, but this is your choice.

  I installed Live Mesh 2011 on desktop Win 7 Home Premium to my wife and in distance/access control can it go literally anywhere. Sometimes I use the web based (IE. Method ActiveX) from my laptop on the desk.

  Here is an example of a session Windows Live Mesh 2011 remote connections on my laptop computer for access to the / remote control of desktop Win 7 Home Premium to my wife.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 402 & Thierry = 25AB668DA65C8FBE! 118

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 401 & Thierry = 25AB668DA65C8FBE! 118

  Otherwise if you want to remotely control a computer looking Windows Home Edition to TeamViewer (free for personal use) or VNC (my favorite is UltraVNC with its encryption plugin) as the other two alternatives.

• What is a proxy server? Do I need to install the application proxy? And how to set up a proxy server to act as a gateway to the internet

  What is a proxy server? Do I need to install the application proxy? And how to set up a proxy server to act as a gateway to the internet and also a firewall to protect the network, finally to restrict internet access by employees to force employees to follow company policies?

  Hello

  Explanation of the Proxy Server

  http://en.Wikipedia.org/wiki/Proxy_server

  How to configure Internet Explorer to use a Proxy Server

  http://support.Microsoft.com/kb/135982/en-us

  How to set up a Proxy Server

  http://www.ehow.com/how_4488403_set-up-proxy-server.html

• How to set default cell format 'text' instead of 'general' sheet in excel using pl/sql code?

  Can someone please help me on how to generate excel file using pl/sql? I have generated csv files successfully, but now I need to generate a excel. I changed the code generation of the csv file, but the file gives me error when opening:

  "The file you are trying to open,"XXXX.xls", is in a different format than specified by the file extension. Do you want to open it now? »

  If I choose Yes then open the excel file, but it excludes the leading 0 in the front for one my column. How do I configure excel type default column as text rather than General, when you create the files? I also tried to generate excel file using xml. But I do not know how to set the type of column there, too. I'm using Oracle 11.2.0.3.0 and APEX 4.2.6.00.03. I'll call all these codes apex.

  Code1 is used:

  Declare

  output_header varchar2 (4000);

  fichier_en_sortie VARCHAR2 (255);

  Varchar2 (2) EOL: = Chr (13) | Chr (10);

  BEGIN

  output_header: = 'tls_tracking_id ' | Chr (9) | ' fnn_ext' | Chr (9) | "path_id' | EOL;

  fichier_en_sortie: = 'report_excel' |'. XLS;

  owa_util.mime_header ("application/octet ', false");

  HTP.p ('Content-Disposition: attachment; filename = "" | ") fichier_en_sortie |' « ') ;

  owa_util.http_header_close;

  HTP. PRN (output_header);

  for r in)

  Select tls_tracking_id, fnn_ext, DWD_DTOV_OUT_VW path_id

  where nbn_loc_id = 'LOC000138413115. '

  The order of tls_tracking_id LOOP)

  HTP. PRN (r.tls_tracking_id

  || Chr (9) | r.fnn_ext

  || Chr (9) | r.path_id

  || EOL

  );

  END LOOP;

  END;

  Code2 used :

  create or replace PACKAGE BODY IS pkg_excel_export

  PROCEDURE excel_open (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = ' <? XML version = "1.0" encoding = "ISO-8859-9"? > ' | Chr (10) |

  "< workbook xmlns =" "urn: schemas-microsoft - com:office:spreadsheet" ' | "

  Chr (10) |

  ""xmlns:o ="urn: schemas-microsoft-com ' ' |

  Chr (10) |

  "xmlns: x =" "urn: schemas-microsoft-com: excel" ' | "

  Chr (10) |

  ""xmlns:ss ="urn: schemas-microsoft - com:office:spreadsheet" ' |

  Chr (10) |

                          'xmlns:html=" http://www.w3.org/TR/REC-html40 ">' ||

  Chr (10) |

  ' < ExcelWorkbook xmlns = "urn: schemas-microsoft-com: excel" > ' |

  Chr (10) | ' < WindowHeight > 8580 < / WindowHeight > ' |

  Chr (10) | ' < WindowWidth > 15180 < / WindowWidth > ' | Chr (10) |

  ' < WindowTopX > 120 < / WindowTopX > ' | Chr (10) |

  ' < WindowTopY > 45 < / WindowTopY > ' | Chr (10) |

  ' < ProtectStructure > false < / ProtectStructure > ' | Chr (10) |

  ' < ProtectWindows > false < / ProtectWindows > ' | Chr (10) |

  ' < / ExcelWorkbook > ' | Chr (10) | "< Styles > | Chr (10) |

  '< ss:ID of style = 'Default' ss:Name 'Normal' = >' | Chr (10) |

  "< ss:Vertical alignment = 'Bottom' / >" | " Chr (10) |

  ' < borders / > '. Chr (10) | ' < police / > '. Chr (10) |

  ' < Interior / > '. Chr (10) | ' < NumberFormat / > '. Chr (10) |

  ' < protection / > '. Chr (10) | "< / style > | Chr (10) |

  '< ss:ID of style 's22' = >' | Chr (10) |

  "< x: font family = ss"Swiss":"BOLD"="1"ss:Underline ="Single"/ >" | "

  Chr (10) | "< / style > | Chr (10) | "< / style >";

  END excel_open;

  PROCEDURE excel_close (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | ' < / workbook > ';

  END excel_close;

  / * Opens a worksheet in the Excel file. , You can open multiple worksheets. **/

  PROCEDURE worksheet_open

  (

  l_xml_body IN OUT NOCOPY CLOB,

  p_worksheetname in VARCHAR2

  ) IS

  BEGIN

  --

  -Create the worksheet

  --

  l_xml_body: = l_xml_body | "' < worksheet ss:Name = ' ' | p_worksheetname |

  "" > < table > ";"

  END worksheet_open;

  / *Farm the worksheet in the Excel file.   **/

  PROCEDURE worksheet_close (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | ' < / table > < / worksheet > ';

  END worksheet_close;

  / *Opens the tag line * /

  PROCEDURE row_open (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | "< row >."

  END row_open;

  / *Farm the tag line * /.

  PROCEDURE row_close (l_xml_body IN OUT NOCOPY CLOB) IS

  BEGIN

  l_xml_body: = l_xml_body | "< / row > | Chr (10);

  END row_close;

  / *After the opening of the line, we can write something the first cell* /

  PROCEDURE cell_write

  (

  l_xml_body IN OUT NOCOPY CLOB,

  p_content in VARCHAR2

  ) IS

  BEGIN

  l_xml_body: = l_xml_body | ' < cell > < data ss:Type = "String" > ' |

  p_content | ' < / data > < / cell > ';

  END cell_write;

  / * If you use this package of APEX, you get to download the excel file. **/

  PROCEDURE excel_get

  (

  l_xml_body IN OUT NOCOPY CLOB,

  p_filename in VARCHAR2

  ) IS

  XX BLOB;

  make the NUMBER;

  This NUMBER;

  BC NUMBER.

  LC NUMBER;

  w NUMBER;

  BEGIN

  DBMS_LOB.CREATETEMPORARY (xx, TRUE);

  make: = 1;

  so: = 1;

  BC: = dbms_lob.default_csid;

  LC: = dbms_lob.default_lang_ctx;

  w: = dbms_lob.no_warning;

  DBMS_LOB.converttoblob (xx,

  l_xml_body,

  DBMS_LOB.lobmaxsize,

  do,

  Thus,.

  British Colombia,

  LC,

  (w);

  owa_util.mime_header ("application/octet ', FALSE");

  -set the size so that the browser knows how to download

  HTP.p ("Content-length: ' |") DBMS_LOB.GetLength (xx));

  -the name of the file will be used by the browser if users only one save as

  HTP.p ('Content-Disposition: attachment; filename = "" | ") p_filename |

  '.xls ' | '"');

  -close the headers

  owa_util.http_header_close;

  -Download the BLOB

  wpg_docload.download_file (XX);

  END excel_get;

  END pkg_excel_export;

  I know it's a bit long code, but to better understand please consider...

  Thank you.

  I did worked putting just one extra line in my l_xml_body in the XML (Code 2 used). Now my excel generates with cells type 'Text' and there are no left falling to zero. Also the columns display not scientific format as 2.3D + 12. Current recording shows without default formatting.

  '

• How to set up a folder/area of restricted access in Adobe Muse?

  I use Muse to design my sites but have several hosted elsewhere. I provide a series of educational videos in my view (gottaknowlight.com). Some are free and some are paid. I want to put videos paid within a space protected by password for the user, but do not know how to set up a separate folder. I know how to protect the folder once that I get it put in place. Any help?

  You cannot configure an additional folder to Muse. You must create a new folder on your server and your secure area section will have to be built as a site separate and then downloaded into this folder.

  You can watch using Business Catalyst for all sites that require a secure area.

• new update of Apple Watch doesn't have My Watch tab. I can't understand how to set up friends or family ring

  I updated my Apple Watch with the latest version of the software that is 10 IOS. But the last update did not My Watch tab in the settings. I can't understand how to set up friends or family ring? Any help on this will be appreciated.

  Hello

  IOS 10 (as in the previous version of iOS), My Watch tab is located in the application of the watch (not in the settings).

  If you have also updated your Apple Watch to watch OS 3, note that the application of friends (accessed via the side button, with a circle of people) has been removed from the watch and that there is no direct replacement for this feature.