Mode from standby/hibernation missing on my laptop Satellite L750-16Z

Similar Questions

• Satellite M30X-111 wake up from standby/hibernation mode

  People, like many of you, I had the questionable connection DC problem and I solved this at the time of re - solder the wandering joint on the connector for the motherboard.

  Everything was fine with the laptop until yesterday when I tried to get the machine to wake from standby / hibernation if it is when you close the screen) and now all that happens is that the blue light around the power button lights up, the CPU fan runs for about 5 seconds, the HARD drive light flashes once Maybe two times and the DVD briefly climb towers.

  Also nothing happens... the screen is blank and the laptop is actually not from the occasional maelstrom of the fan.

  Is it in any case to perform a reset of some sort to get it to snap it on hibernation? I have read up on this subject on various forums and have tried to start without memory, without the HARD drive and the DVD drive and still no life.

  Any input is appreciated that I need this laptop to spring into life again.

  Thanks in advance

  Ground

  Hello

  to wake up the machine, simply remove the battery and the AC and leave the machine for a few hours. After that, it should work again.
  By the way: sometimes it s a good idea to do a biosupdate, because maybe the problem comes from the bios.

  Please give some comments about your success... :)

  Welcome them

• Auto erasing in pro SSD comes from standby/hibernation mod.

  Hallo! Help me)

  I'm on macbook pro 13 "2011 i5. So I bought ssd to upgrade my mac. These are the 128 GB plextor m6pro. I cloned all the disk system ssd. Also I bought optibay, I broke my hard drive cable, so now the whole system works on optibay and ssd (without hard drive).

  I have a serious problem. When I close the macbook and then open after a few minutes my system begins to work is not properly so I click on system reboot and Flash then folder with the question. I like this for 4 times, other times just system opens when I opened my macbook. Then I go to the internet-> disk utility boot and see this ssd is completely erased, no partition! I don't really know what to do.

  It seems that he connects with optibay because it uses cd, mode standby/hibernation and sessions.

  Please help me! =)

  I forgot to add, all the time, I used trimforce enabled, unless it's necessary information. Hope someone could help me.

• Running back from standby/hibernation program

  Hey there,
  I want to launch a program every time I come back/sign my computer after the standby/hibernation mode. I only found a possibility to play sounds of a logon each time that this happens, but I can't run programs like that. Is it possible to do it on Vista?

  PS: If it isn't, can you send this request apparently simple functionality to the Windows 7 development team?

  While the mark's instructions look as if they will work, there is a more elegant way to achieve, using Vista built in Task Scheduler.

  To create a task that runs whenever you unlock your profile:
  1 open the Task Scheduler [start > Panel > system and Maintenance > administrative tools > Task Scheduler (or just type "Task Scheduler" in the box start search)]. You will need an administrator account/password for access to this.
  2. Select "Create a task" to create a new task.
  3. a panel with several tabs will open.
  4. fill the 'Général' tab to meet your needs.
  5. go to the "Triggers" tab and choose "new". Another panel will open. At the top of this Panel, you will see a (see below). Open it and choose ' to unlock the workstation. Then choose if you want this task to run just for your profile or for everyone. Click on 'ok '. (You can find it useful to use the option "Delay task" to delay the task for 15-30 seconds to give your office a chance to load before the program runs.)
   
  6. go to the Actions tab, select 'New', choose 'Run program' and locate the program you want to run.
  7. Select the tabs 'Conditions' & 'Settings', respectively and change various settings according to your needs. (Make sure that the "Run on AC Only" option is disabled if you are using a laptop and want the task to run when it is unplugged).
  8. click OK to save your new task.
  Now, whenever you unlock your profile after the standby or Hibernate mode, your program runs.
  If you follow these instructions, but choose "connection to" rather than "To unlock the workstation", your task will run whenever you connect (unlock and logon are not the same thing as the computer is concerned, so keep that in mind).
  This may not work if your profile is not protected by a password, but all mine, so I couldn't test it in this situation.
  I hope this will satisfy your needs.
  Best wishes
  BookwormDragon

• Question from standby/hibernation on Portege M400(3G) after update BIOS 3.50

  After installing 3.50 BIOS update, the machine stopped to switch to manual mode of sleep. He begins to enter standby mode, the screen turns off, switches of the computer during approximately 5 seconds with power led to go off and then restarts.

  After reboot, Vista Business 32 reports BSD caused by the unknown device driver. Any ideas on how to solve this problem?

  That s right, the same topic has already been discussed, so please check this page. :)

  Welcome them

• Volume icon is missing on my laptop satellite

  Hello

  yesterday, my 'sound' icon has disappeared from the area of notification at the bottom of my laptop. I was in 'my computer' and said the good show icon and notifications box, I then in turn on or off system icons and one is off, I can not click on it.

  I downloaded a new driver for that noise had stopped working together, but that was months ago and sound works, it's just the icon which is absent and it is at full volume. I can't find any other way to control the volume.

  Please help, thanks.

  Hello

  Check it please this Microsoft forum thread and please try posted solutions here.

  I hope this will help you. If yes post some comments please.

• Standby/hibernation does not work on satellite

  Click on start/stop of the computer/standby and nothing happens.

  Hibernation icons and the day before are not active just stop and cancel it.

  Can anyone help.

  Hi Colin,

  Go to the Toshiba power management option and click on the "Advanced" tab make sure that the enable hibernation support option is checked. Alternatively, if you use Microsoft power options, then click the Hibernate tab, and check that put into hibernation is enabled.

  Kind regards

• Menu key missing on my laptop satellite

  Hello!

  I clean my hard disk and reinstal windows. After him, gray menu what apears when I press the Fn key, disappeared from my computer.

  Where I can find the program or the driver to restore?

  You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
  What you need, it's that Toshiba value added package.

  Please, install it and let me know if you can see the maps Flash when you press the FN key?

• Missing operating system of satellite L750 / 04 k

  Hi, well seems I'm having an affair with the toshiba.

  Had to uninstall and reinstall the drivers for the touchpad on/off function - view still does not.
  TS advised necessary package - spend 2 + hours download 32 bit; When he did not TS another let me know because I had a 64-bit system, I had to source download and extract this one so 3 more hours later that she has not made.

  Need to restore laptop to factory settings. Closed TS; as part of their F questions they gave a guide how to "restore."
  -turn off the laptop.
  -turn on computer laptop while holding the key '0' (next to the key 9)
  -screen on laptop said "Missing Operating System" top left and bottom left corner "HDD Recovery *'"

  No recovery disc were in the area when buying this new laptop in June 2011.
  Seems I have ongoing issues with the functions of the key board.

  It was the same problem, I have lived 2-3 weeks ago and said it was a virus and had to correct this through the clearing system and reinstalling from a backup.

  Advice would be greatly appreciated. ... as he does this, I read the manual, haven't tried to support toshiba google on the iphone no chance and has spent the last few hours 3 defining my "old" laptop to get some internet access...

  Seems that you are referring to this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64929

  > No recovery disc were in the area when buying this new laptop in June 2011.
  The recovery CD were not part of the package, because you can create a clean recovery using the recovery disk creator.

  Here is a FAQ How to run the system on Toshiba restore Australian books:
  http://www.MyToshiba.com.au/support/items/FAQ/71

  If the HARD drive recovery is not possible, then you will need to use a recovery disc.
  The missing restore disc can be ordered here.
  http://www.MyToshiba.com.au/support/items/FAQ/69

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• Satellite Pro A200GE-1F9 may not resume from standby or hibernation with SP1

  Hello

  Details of the laptop: [my laptop: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 131911]

  I recently used Windows Update to install SP1 vista on my laptop, but since this installation I can't resume from standby or hibernation. (Service pack has successfully installed - according to Windows anyway).

  At the resumption of his sleep, I get a blank screen.

  During the recovery from Hibernation, I receive a STOP error message: + Stop 0x0000008E (0xC0000005, 0x82F11020, 0x9A9D9714, 0x00000000) + caused by * Classpnp.sys*.

  After checking these forums, I have seen that Toshiba does not support SP1 + what is accurate? +

  + * If so when/how we will notify when Toshiba released a "patch" for compatibility Vista SP1? I'm guessing that via personnel TEMPO? *. +

  Before installing SP1, I installed all the updates (from Microsoft and Toshiba) and had no problems; all the drivers are up to date.

  Thanks for any answers in advance.

  I guess that this happens because of a problem of compatibility between some pilots and SP1

  > After checking these forums, I saw that Toshiba does not support SP1 is that correct?
  Yes it's true.

  > If Yes, when and how will notify us when Toshiba released a "patch" for compatibility Vista SP1? I'm guessing that via personnel TEMPO?
  I think that there should be information on the Toshiba driver page, support page or we will receive some information of Toshiba through applications of Tempo.

  We'll see

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• locks up PC / gets stuck in standby/hibernation mode

  I clubhouse of compaq with preinstalled windows vista that I bought the pc in September 2008 when I fist got the pc he would be stuck in standby/hibernation mode when I pressed on the moon shaped button or when I let it just fall asleep on his own. I went back to the futureshop in my period of 2 weeks buyers and they interlaced monitor as would the tower should green light that he was always on but monitor would remain off until I unplugged the pc from the wall (button / stop does not work)

  now almost 2 years later July 2010 I have problems with Explorer does not or anything like that to with the internet, even my network sharing Center wouldn't load so I took it with future shop service plan and they found some viruses but removal did not work, so they have restored and now I have new sleep problems and they advised me that it can't be fixed. I have disabled the sleep on the keyboard button, but left the pilot light. the technicians reported that they turned off and now it will not (duh!) they told me that I just have to live without it no idea what can help?

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to disable the standby/Hibernation on series Satellite Pro U mode

  Hello
  I have on my Satellite Pro U installed Windows Vista professional series.

  During the defragmentationprocess my machine automatically goes to sleep.
  Does anyone know how to disable temporarily on hold, the defragmentation process can be completed successfully.

  Published by: Admin on December 1st, 2007 08:13

  Hello

  to disable the standby/Hibernation mode on your system, you should just go to "Control Panel" and open 'powersaver' to change settings powersaver.

  The Powersaver contains profiles where powersaving all associates are defined parameters. You can change this profile and disable the sleep/hibernation mode to perform your defragmentation.

  It would help if you post what system you have...

  Greetings