How to share the specific user-specific folder?

Similar Questions

• Extended Analytics (how to share the model to the other user)

  Hello
  
  Can any one please tell me how to share the extended Analytics (already created model) model to the other user.
  
  Thanks in advance,
  MB

  Scopes analytical models are user specific, although I think that that has changed after that some released in the series 9.x. Hyperion, at one point had a utility that allows you to copy the template from one user to another, but I don't know if that still exists. It may just be easier to have users to recreate it in the short term since it is really just a problem of selection of metadata.

  -Chris

• How to get the specific information of hardware and software data center

  How to get the specific information of hardware and software data center with powercli...

  What kind of information you need?

  No matter what Esxi host hardware info., if so could below thread is useful.

  Information about the host material with information on the nic and HBA drivers

• How to install the specific font of our company with photoshop?

  How to install the specific font of our company with Photoshop - it's the police of Gotham?

  
  

  The fonts are installed in your operating system not Photoshop.  Photoshop uses the fonts installed on your machine.

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• How to share the Captivate 4 slideshow

  Hello

  I created my first slideshow in Captivate 4 which includes 65 photos.

  1. can I he publish in Google Picasa so that my friends can see them?

  2 if not, how I share, and another user have to have Captivate to observe it.

  Thank you

  Hello

  Maybe I'm not always very clear, because English is only my third language. Photoshop was my first "love" of the Adobe brand, many, many years ago (started with version 2.5, after the death of Photostyler) and I'm still a big fan, it helps all the time (even for the improvement of the screenshots). Don't know of fireworks, I'm an academic and we're tight budgets. Always have a bunch of tests on my machine to judge existing opportunities. Very happy that I could recommend and use PS, Acrobat, Captivate, and recently the SLE. When I mentioned to be a control freak, you'll understand why I'm not fan of MS products (having to learn MS Project and always cursing it) because there are so many things behind the scenes that we can't control. PS, in particular with the latest features in CP I have never the same frustrations. Hope that this explanation is sufficient?

  Lilybiri

• How to reset the System Volume Information folder?

  I would like to know how to reset the System Volume Information folder to empty all the potential viruses.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  

  I use cleanmgr /sagerun:1 of the dialog box run when you use a switch.

  However, I usually just use these instructions.

• How to stop the McAfee anti-spam folder appear in Windows Mail?

  I know I've done this before, but I just had to reinstall the operating system and forget how to stop the McAfee anti-spam folder to appear in my Windows Mail Inbox.

  Help!
  Thank you!!
  It should not appear in the Inbox WinMail, but rather a clean folder. The best way to stop it from appearing anywhere descend McAfee of your machine.
   
  Norton and McAfee are the two least friendly Windows security and swine resource to start programs. My ISP offers the McAfee security suite for free and I refuse to use it.
   
  I used to use Avast in conjunction with Windows Defender, (still a decent option), but since MSE became of age, I have used which. MSE is an anti-virus, Anti-Spyware and Anti-Malware program all in one. IMO, it is a program MS got it wrong. And all of these options are freeware.
   
  If you choose to give it a try, download and save the MSE. Remove McAfee and install MSE.
   
  Microsoft Security Essentials
  http://www.Microsoft.com/security_essentials/default.aspx
   
  Correction of tool McAfee Consumer Product Removal triple
  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS100507  

• the profile user account folder can be renamed instead of create a new user account

  I noticed this issue posted everywhere that none got the answer, the person posting was looking for.  Basically, the question is "can the folder of the user profile account be renamed? '...  I have the same problem.  I sent a PC in for repair.  They reloaded the operating system and created the new test user account.  Rather than just create a new user account, I've renamed the test NAME user account.  I couldn't help but notice later that user account folder name has remained the same "TEST".  That's why you have people to ask the question "can the folder of the user profile account be renamed instead of create a new user account."  It of an easy fix but does not answer the question.

  It is not usually. If you have a computer, why not have just him take care of it for you instead of friction top yourself? ;-)

  Try this instead if you really must do it yourself:

  1. create a new administrator account. Call it 'CompAdmin' or 'Tech' or similar. You definitely want to have an administrative user account like this set up that you will use not except for emergency situations. You will use this in the elevation of privileges in your daily report - which will be a Standard account - but will not need to connect to CompAdmin after that company copy unless something goes terribly wrong. ;-)

  2. create a new user account Standard for your daily work. This called something that makes you happy. I don't know your real name, so I'll call it "HDXer". Connect to HDXer to create the profile files/folders.

  3. connect to CompAdmin and:

  a. Control Panel > everything on the control panel > Folder Options

  b. click on the view tab, click hidden files and folders, clear the Hide protected operating system files check box and then click OK. Now you can see everything.

  c. using Windows Explorer ("computer"), search for the file C:\Users\Test.

  d. Select all files and folders in this folder, except the following files: Ntuser.dat, Ntuser.dat.log and Ntuser.ini.

  e. click on the Edit menu and then click on copy. If you don't see the Edit menu, press ALT.

  f. Locate the C:\Users\HDXer folder.

  g. click the Edit menu and then click on paste. If you don't see the Edit menu, press ALT.

  Sign out and then sign back in as a HDXer. All your stuff should be there. You need to configure your icons and wallpaper (Control Panel > Personalize) and some preferences have been postponed, but really with the exception of the email all your data, Favorites, etc., should now be at the HDXer.

  If you have messages in an e-mail program, such as Windows Live Mail, Thunderbird or Outlook, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. Because I don't know what you use for email, I can't give you the details about it. If everything is working properly, you can remove the old Test profile by using the user accounts applet in Control Panel. It won't hurt anything to make you leave the trial on the system for a while, or even forever.
  MS - MVP - Elephant Boy computers - don't panic!

• How to remove the local user Mmic?

  Hello:

  I have to connect to cisco Mmic via browser and try to create local users. later I want to delete these users and can not find how. the document mentions only how to add a user and change their rules / passwords, but it didn't say how to remove the old users.

  my version of cimc is 1.43 k. thank you much for the help!

  I'll open an enhancement request to add a feature to 'delete '.   It may be some time until she is a priority in a statement.

  Kind regards

  Robert

• How to get the top users page?

  Hello

  How to build the top users page with which users are more recently logged_in to the application? Similar to the picture here

  

  --

  Thank you.

  Venky_prs wrote:

  How to build the top users page with which users are more recently logged_in to the application? Similar to the picture here

  

  Create a report of region using a query like:

  select
      user_name
    , max(access_date) most_recent
  from
      apex_workspace_access_log l
  where
      authentication_result = 'AUTH_SUCCESS'
  and application_id = :app_id
  group by
    user_name
  

  Use of the ' 16 hours ago" number / Date Format MOST_RECENT column.

• How to enable the end user determine the type of sort?

  Helllo all,.

  I use APEX 4.2.2. Oracle 11.2.0.3.

  In a classic Rerpot (line custom model), how to allow the end user to determine the type of sorting?

  I use decoding to select the column that the sort is done, but how to determine: Asc / Desc?

  order by decode(:P2_SORT, 'PRICE', v.PRICE, 'PROP_SIZE', v.PROP_SIZE , 'BEDS' , v.BEDS , 'AREA' , v.AREA) 
  

  Kind regards

  One way may be to use a second element which maintain the sort order. Lets call it P2_ASCDESC.

  Your order by condition might look like this:

  order by decode(:P2_ASCDESC,'ASC', decode(:P2_SORT, 'PRICE', v.PRICE, 'PROP_SIZE', v.PROP_SIZE , 'BEDS' , v.BEDS , 'AREA' , v.AREA), null) asc
          ,decode(:P2_ASCDESC,'DESC', decode(:P2_SORT, 'PRICE', v.PRICE, 'PROP_SIZE', v.PROP_SIZE , 'BEDS' , v.BEDS , 'AREA' , v.AREA), null) desc
  

  I don't like this solution, since you réimplémentez one of the nicer features that apex was already out of the box. Better would be to stick to a classic report template and allow the standard user-defined sort order. Why do you think that you need your own non-standard solution?

• How to use the Weblogic user in my WebCenter application?

  Hello
  
  I'm doing my first Webcenter application. I have configured my wiki and weblogic server to connect, forum (discussions) with my users OID. So now any user OID can connect to this application.
  
  In my custom application Webcenter I configured JAAS security, now I would like to know how to use the same users OID in my application. Is this possible? Can someone help me? I tried Oracle Developers Guide, but it doesn't help me.
  
  Sorry for my bad English...
  
  Thank you
  
  Nelson

  You need to register a new provider of authentication on WLS. Please see this link http://www.oracle.com/technology/products/jdev/tips/fnimphius/oidconfig/index.html.

• How to share a specific subfolder located under the share main parent folder?

  Hi all

  My concern is as below:

  say there are the users "User1" and "user2". main parent folder say "finance" and finance has 3 subfolders 'accounts', 'buy' and 'delivery '.

  now that I have shared a folder main parent of finance both users user1 and user2.

  but 1 2 records must be consulted by user1 (accounts and purchase) and 2 last folder must be consulted by user2 (purchase and deliveries).

  Is there a way to allow this when I share the folder main parent at the same time user?

  conclusion: How can I restrict access to subfolders under main shared folder to the user?

  waiting for the answer and appreciate the prompt and perfect answer for my query.

  Thank you

  Sandesh

  There is no as good as now the two folders are inheriting the same authority as their parent folder, so all of the permissions that you apply to the top folder will be applied automatically to those below him. When you customize the subfolder permissions, they will be is be inheriting the same permissions and will have their own.

• Please how can I create a page based on template and save in the specific folder.

  Please, I spent two days trying to solve this problem.  Here's the situation.  I'm trying to create a Web site for our school.  I created a master template which I intend to use as a base for each teacher's webpage.  I also created folders for each teacher, teachers had to send me their weekly updates what duties inlude, photos and downloads.

  Here's the problem: whenever I have to create a page based on the template of the page is created in the root folder.  There is no way to create pages in the files of specific teachers.  I save the page and try to drag to the respective folder.  When I try to save the file, Dreamweaver he re-recorded in the root folder.  If I try to view the html file in the folder of the teacher that the overview does not load.  I have three books of refernce DW, including the Missing Manual and no of them don't address this problem.  Neither is Adobe.

  Surely someone here created a page based on a template and placed in a folder without breaking all the paths.  Why DW does not provide a way to save a page template based in a specific folder.

  Thank you all for responding.  The problem was that I was using DW on my macbook.  To access save as function I finally understood that you must click on the small triangle next to the name. not the Favorites or recent locations triangle.  Lost two days trying to understand cela.  Incredible.