Update on call for ask the SP2 update after several 'successful installations.

Similar Questions

• Guard of the Important Windows Vista Service Pack 1 (SP1) Windows Vista Service Pack 1 (KB936330) asks me to install after several successful installations

  Whenever I start my computer, the Windows Update icon is asking to update "Windows Vista Service Pack 1 (KB936330) Important Windows Vista Pack 1 (SP1).

  After several successful installations, the icon appears again with the same 'application for installation.
  Under the "updates installed", he said several times that the update was successful.
  Any remmedies or recommendations or is this normal?
  It all started after I reformat my computer.

  Hello

  Check to make sure that it is installed by using this method, there are Service Packs for other different applications that must also be installed >

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not installed, then choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And as appropriate >

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  See you soon.

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Printer Canon installed an optional update Fax saying "successful installation", continues to appear again for the installation.

  Original title: optional update Canon printer FAX

  I installed a Canon printer and installed an update about it (FAX) on 10 times that he says was a "successful installation".  Then I run the update again, and it appears again as an optional installation.  Why?

  Hi TerryNobleUJ,

  1 Windows operating system you are using?

  2. What is the number of the printer model?

  You can see the links in Support of Canon and try to download and install the latest version of drivers for your printer.

  http://www.USA.Canon.com/Cusa/support

  http://www.USA.Canon.com/Cusa/support/consumer

  After you have installed the drivers manually, restart the computer and check if it is available in the windows updates.

  For more information, see the article:

  Update drivers: recommended links

• Change the kernel settings after 10g Software Installation

  Hello world
  
  I need to install Oracle 10 g 2 in a box of HP - UX Itanium for an upgrade of Database 9i and 10g and some have recommended prerequisites of the kernel are not defined as requested for the installation program. Kernell settings have been changed in order to fulfill the preconditions but the can´t server be rebooted now because it is a production environment, it will be restartedb in two weeks, but I want to start right now with the installation software.
  
  My question is: safetly can I install the software, and after restarting the server, perform the upgrade of my database?
  
  The kernel parameters that failed were:
  Verification of the maxdsiz_64bit = 2147483648;      found maxdsiz_64bit = 1073741824.     Failure of < < < <
  Verification of the maxswapchunks = 16384;           no entry found.                         Failure of < < < <
  Checking the semmap = 4098;                no entry found.                         Failure of < < < <
  
  
  I'll appreciate your help... Thanks in advance!
  
  Alvaro Uribe
  
  Edited by: 865814 01-Aug-2011 13:47

  Hi Alvaro;

  I belive that you can go to to ignore this message on your installation. But after installation you need to restart your server coz if you keep working like this probably will hit you on your db errors

  Respect of
  HELIOS

• Site publishes updates to the FTP host after initial success publishing

  Hello

  I have updates publication of wrong on my site.  The site is online via a FTP host and successfully worked the first time. However, when I go to make changes to the site and click on "publish to FTP host' 'All files', these changes take effect on the online site.  I have also cleared my cache and I always meet the question.

  What you have in the directory of the host? Keep empty and re - publish. Directory (folder) host on the server host is where your website files will be downloaded. Some Web hosts require you to upload your site to a specific folder on the server and others advise you to leave this field blank.

  If the foregoing is not helped either, please help support cat Muse - http://helpx.adobe.com/contact.html?product=muse&topic=signing-in-to-my-account.

  Thank you

  Vinayak

• the call for a process of apex after a javascript called the same key

  A url button calls a procedure of java script in the header,
  but then I need a process by their Summit to run after that.
  How can I do that.
  Thank you
  Doug

  Hi Doug,.

  A few questions for you...
  

  
  
  1. What features are you trying to reach?
  
  
  2. What APEX version do you use?
  
  
  3. When you say 'process', do you mean "process Page"?
  
  

  There are certainly ways to submit the page and trigger a process page to run via JavaScript, but it would be good to better understand your needs before offering has some solution first.

  Kind regards
  Anthony.

• Error: Code 646 after several attempts installation 5 Microsoft Office updates.

  I am running Windows Vista (32-bit) Home Premium Edition Service Pack 2 on a Dell Inspiron 530 s PC.
  Specific updates I have experienced the problem are:

   Update of security for Microsoft Office 2003 (KB975051) 492 KB
   
  Update of security for Microsoft Office Excel 2003 (KB973475) 4.9 MB

  Update of security for Microsoft Office Word 2003 (KB973443) 5.6 MB

  Update for Microsoft Office 2003 (KB978551) 466 KB
   
  Update for the filter of junk mail to Outlook 2003 (KB977840) 3.4 MB

  I had my computer in "safe" mode during the installation. I tried disabling my firewall temporarily, then I tried with all the protections that are temporarily off.
  * I really don't understand the reasoning for me required updates for Microsoft Office 2003 and related features... I have not installed it in my computer, nor use any product of Outlook. I guess maybe it's to cover items that can be received by e-mail perhaps as an attachment. ??
  Thank you in advance for your help,

  -o00o - X / {'' '(in) °' °} / X - o00o -.

  Have you tried to download and install the office updates manually?

  IE: http://office.microsoft.com/en-au/downloads/results.aspx?qu=KB975051&av=DCT000
  http://search.Microsoft.com/results.aspx?mkt=en-us&setlang=en-us&q=KB973443
  TaurArian [MVP] 2005-2010 - Update Services

• April updates are several times installation and configuration

  After using Windows Update successfully for 18 months, starting with the April updates, my computer downloads and installs the updates 12, produced through step 1 and configuration step 2, apparently successfully, restarts and produced through the configuration of step 3, apparently successfully, restarts and shows updates are not configured correctly and reverses all the , I tried half a dozen times, tweaking the settings etc in the meantime and it happens every time.

  WebcamFan,

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

  04/25 / 1112:25: 41 pm

• Options for adjusting the audio files on several scens

  Hi all.

  I just did a search for information on this question but couldn't fine anything specific to what I'm looking for. If there is already a thread that deals with this issue please feel free to point me in that direction.

  I use flash cc. I have a .fla with 8 scenes (apparently I shouldn't use scenes as they are outdated now, but I find it more practical to scroll through thousands of images and test only small portions of the video together. "I just saw something combining .fla smaller and separate files so maybe next time, I'll try).  I have a lot of sound files embedded throughout these different scenes, each of them worth 'stream '.  There are a lot of voiceover and synchronization of the lips of character during several different layers.  So far, the time is fine and playback is fine on all scenes.

  However, a friend who helps me with the said sound individual files need a lot of work (i.e. to change the volume (and perhaps EQ)) for some of them.  I could go back through each layer/instance and the volume individually but that the process takes time and, for some of them, the volume is already contributed to the maximum in the envelope and yet they need to be stronger (or doctored EQ), which means that their manipulation in hearing and then re - insert back into the time line.

  This is my basic solution I want to fall back on if there is no other choice for a faster process. All audio files are .mp3 or .ogg.  Ideally, what I'd like is a way to extract all the sound elements of the .fla, (while maintaining the timing of each file compared to the other), in hearing as a session multitrack so that individual files can be modified accordingly and then reinserted back into the .fla and when is not affected.

  Something tells me that is not particularly realistic depending on how flash works with scenes.  I've only worked with flash for about 5 weeks, so my experience is quite limited.  Any suggestions on how to make this task easier, even if only a little?

  Oh, it's another solution, that someone suggested that, rather than insert the file itself in the line of time (from the library) I could insert a bit of actionscript code that points to the location of the file.  This way I could load all the files in audition manipulate them, then save them with the location where the points of actionscript and the timeline would automatically update accordingly.   I don't know if this is a solution for my situation even though I understand actionscript is very versatile in this way.   However, I also read that actionscript can confuse the calendar sync sound/animation on several stages, when it is piled up all together at the time of publication.  Any ideas?

  Thank you

  There is nothing wrong with scenes, they are very useful at the same time. People who say do not use maybe never had cases that show the utility they are.

  If you use the stream for the lip sync, you should have stayed with WAV, which is much easier to manipulate than the MP3.

  External MP3 with the code reading would have been almost impossible lip sync.

  The fastest solution would be if you had external files you imported originally, then you could take those by hearing and import new files to the library, to replace those who was there.

  If you do not have the external sound files original there is a trick that you can do. Go into every scene and make an orders/convert to other Document Formats/HTML5 Canvas. A little whim of the converter is that it converts the level you are and any FLA (unless you happen to the next level.) I hope that you will get this scene as a HTML5 Canvas in Florida you can then do a test movie, and it will publish to all the sounds in a folder, ready for Audition. You can find the file names have changes, and you need resolve names before you import the new sounds into the AS3 FLA, give them correctly.

  If that sounds intimidating, install Flash Pro CS6, what you can do on the part of previous Versions of the CC/Apps tab. CS6 you can right-click on each sound in the library and edit it in the hearing. Unfortunately, this requires hearing 9.0, which you would also need to install the previous Version of CC/Apps (and it will overwrite your current version). I ee who's here is 9.2.0, which I think might work.

  So, to find the sound files original would be the easiest way, and moving by HTML5 Canvas might work more easy to reinstall CS6 and hearing 9.2.0.

• FSX asking the activation key after installation of acceleration.

  Original title: activation problem

  Today, I installed and activated the thenI installed FSX acceleration. When I started to FSX, asked me to activate again. I don't want to use the second key.

  FSX Acceleration has a separate activation code and must be activated also. I bought the FSX Gold edition and it came with the acceleration disc that had its own activation code, the acceleration pack is an option that must activate also. Make sure that, if you use it for private lessons of drivers to install also the scenario generator, otherwise it is not necessary.

• What happened to the Audio? After several minutes/hours, the noise disappeared.

  That's what I don't understand. It has happened before, but it was not the worst. But it seems that the worst has happened now. I don't know why audio continues put muted even when she is not really silent.

  Then again, I find, then typed Audioand selected find and troubleshoot Audio playback problems , then it brings me to the Troubleshooting Wizard. The problems of the East, troubleshooting wizards can not find the problem. And even if I look at the details of the speaker, it says it's working properly. Not only the sound is affected, but also the Microphone. Finally, I thought that it is a serious problem.

  Then at that time, as I click on the Volume icon and selected soundsand I went to the reading tab, and that I right click on the speakers and the Test, it actually says: the camera is used by another application. Please close all units are audio playback on this device, and then try again. I'm happy that I finally found why my speakers will not work, but the problem does not stop there. In addition, I do not understand, I only use Google Chrome and I believe that this will not affect the speaker, or maybe it could be something else. I use some applications, but they do not seem to affect the audio.

  Please I need help. I need to know the solution to this problem. The only solution that I can do is to simply restart the computer. Yes, it is quite effective, but I don't have to restart my dozens of PC time to get my speaker is working again. I need a solution to this problem will be corrected and never come back. Without audio, I can't listen to music or watch movies. Need urgent help please!

  Hi BhoyKim,

  This problem is usually due to driver related issues or because of any third party/app program. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. are you this issue while using any specific program/app?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try to update the Audio drivers from the Web site of the manufacturer of the computer or from Windows Update and check if it helps.

  Follow the steps to update the audio drivers:

  a. press Windows + X keys, and then click Device Manager.

  b. expand sound, video and game controllers.

  c. right-click on the sound card , and click Update driver software.

  d. restart the computer and check.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This will help you determine which third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• My flash drive is not exsisting after a successful installation, what is the problem?

  I have windows 7-64 bit
  When my computer asked me to update my flash player from adobe to the latest version 11.1.102.63 with the supplementary McAfee, something has gone wrong in the installation. The installation froze and the update never happened.

  I went to download the version myself through the pages of adobes and select and also here it froze when I got the McAfee too. I tried to do it without the McAfee and he went through, but once the installation is completed I get this message

  I tried to uninstall all Flash Player, that I could find on the computer, I restarted the computer and I tried again, but it does not always something different.

  I can see videos of youtube on youtube, but not through facebook, not based flash drive mappings or use advanced photo uploaders.
  What can I do?
  To avoid me having to ask a lot of words, try to avoid using short versions of names in your response since I was quite bad with this thing of computer language

  Thanks in advance!
  

  Click Start, type System Configuration, click System Configuration, click Selective startup, uncheck load startup items, click on apply, click the Services tab, select hide all Microsoft Services, click Disable all, click on apply, click OK, click on restart.

  After rebooting, run the Setup program.

  Click Start, type System Configuration, click System Configuration, click Normal startup, click on apply, click OK, click on restart.

• Why do I get error 16 after a successful installation. Œuvres of a few days and then software requests me to uninstall and reinstall? Test the trial version of Acrobat Pro DC.

  Installed the trial version of the software. Works for awhile then I get the error 16. This will be my 3rd reinstall. What is the problem? Window 7 Ultimate running.

  Please advise,

  Bob C

  Hi bobc67003602,

  Please try the troubleshooting steps mentioned in this document KB Configuration error. CC, CS.

  Kind regards

  Nicos