How to show several times as output?

Similar Questions

• Lines show several times on State invoice

  Hello
  If terms of payment are payments then lines show several times on the invoice report.
  
  Assume that the payment terms are 10 installments (price point, Description, quantity, price per unit and Extended) lines appear 10 times. But I need display time line data only (article, Description, quantity, unit price and extended).
  
  Please help me to achieve this goal.
  
  Thank you
  Subbarao.

  have you tried to check the number of payment to one?

  Display lines only if the slice number is 1.

  print

  --
  Pradeep

• Element showing several times of SOE.

  Hello
  
  I added an element called 'Basic' once only in the input element. But it's also show 2 times in SOE reports and results of the series.
  
  How to remove it. PL. help.
  
  Thanks in advance.

  The item has been treated several times in payroll run and where you can see the item twice in the series results. Possible reasons could be

  1. the item has been prorated.

  How to check: check if the dates of beginning and end Date was populated in the form of race results for both inputs of the element.

  2. multiple element entries have been created for the element which was ruled out as you confirmed that there are no more entries in the element.

  3. performance results were triggered due to the indirect results.

  You can shoot some queries about this.

  Select * from pay_element_entries where element_entry_id in (select source_id from pay_run_results where run_result_id in (,))

  where id1 and id2 are run_result_ids of the two inputs result execution for the element.

  Perform above checks should give you the reasons.

  Kind regards
  Sharath

• How to show the timer as a progress as 1,2,3,4 bar... on the modal page

  Hi Experts,

  I have a condition where the loading of the page (before the page header), I'm calling a webservice

  so I need to check the response time of this web service so I want to show the timer as a progress as 1,2,3,4 bar...

  Another is the response time is more than 10 seconds if I have to stop the process of webservice

  and to show that "No. Results" to the user.

  Please suggest a solution how to get there.

  Thanks in advance

  Concerning

  Jitendra

  This is an export of the demo app.

  http://sqlprompt.S3.amazonaws.com/ProgressBarDemo.SQL

  Original poster wanted some other features like 1,2,3,4 and stop at or after 10 seconds. Here, the framework should allow these options. You should especially the interval mark and the set value. You can check the value of stop at 100% like I did or stop at the 10 If you set the interval to 1 second.

  Greg

• Contacts showing several times

  Hello

  Given that I've updated the software on my Sony Xperia Z3 Compact my contacts then display several times.

  For example, for a contact I have their office work, work, laptop home and personal mobile all registered under a single entry, I have it synced with my gmail account and now when I discovered their account I see all their details twice, once as Gmail and then as phone contacts.

  I tried to delete gmail accounts, and this leaves no contacts on the phone.  When I reinstalled the Gmail account, Contacts on the phone return, duplicated with a phone list and a list of Gmail.

  Is there way to simple I can go to only display contacts Gmail, a bit like the old phones where you can choose to see the ony Sim contacts, phone contact only or both?

  This only started happening since I've updated the software on the device a week ago.

  Thank you

  You can try to delete data for the storage of contacts, this will remove the contacts on the phone. Then try to synchronize again.

• Artists showing several times but in the same media folder?

  Hi people,

  A bit of an irritating problem and that, despite several attempts to trouble shoot, I have been unable to solve.

  As iTunes traditionally organizes the library along the lines of the "Album Artist", I always used this tab to keep my library in order regarding artists.

  What I've noticed in recent weeks, it is that when I select artists in the sidebar, I could see:

  AC/DC: 5 albums, 70 song etc.

  Then below in the column of artists AC/DC, 3 albums 40 songs etc.

  I thought that this could be easily fixed by say changing the artist album to 'AAA' tags and which would group them together under a single artist label.

  Unfortunately no, what I get instead is the same as above only in AAA, that is to say

  AAA: 5 albums, 70 song etc.

  Then below in the column of artists another AAA, 3 albums 40 songs etc.

  Even when I try and change all new back to AC/DC, its still in the form view. As far as I can see, all the other values in the "Get Info" tab are the same.

  Basically when you go and look at the drive where the folder media, AC/DC of all albums are in one folder. They display properly in the media folder but showing not correctly in the application?

  Any ideas how I can fix it more irritating?

  On my mac, media folder is stored on external hard drive because of the size, the rest of the files in the folder music as a default value.

  Appreciate your help people

  Simon.

  See if this user tip solves your problem:

  Fix split Album or artist listings in iTunes

• Warning log message showing several times during registration to create/update

  When registering, the following error is repeated

  WARNING Sat Feb 14 15:38:15 CST 2015 1423949895405/atg/dynamo/servlet/pipeline/RequestScopeManager/RequestScope-1266341/atg/userprofiling/ProfileFormHandler use by default for the property ProfileTools

  / ATG/userprofiling/ProfileFormHandler use by default for the property ProfileTools

  This message appears like a billion times in newspapers. To be more precise, it appears more 30,000 times last week.

  Please let me know how to disable this warning and we want logging enabled for INFO, WARN, and ERROR.  Just to set the logging level to hide the newspaper is not the solution we are looking for.  Please let me know what is causing the log message appears in the ATG.

  Please guide me to find the solution.

  In your ProfileFormHandler you overloaded profileTools property? It seems that the ProfileTools of the resolution with the Null value and what is happening, it is that whenever the scope of the request initialization of ProfileFormHandler is to find the property of ProfileTools as null so that it throws this warning and initializes the ProfileTools component with the default.

  So, check if you have replaced the property ProfileTools or component itself or have changed its path which can be throwing error in the newspapers during the start-up or component initialization and initially it is null, and if you haven't changed it then you can also try to put profileTools = / atg/userprofiling/ProfileTools in your code ProfileFormHandler file property base to solve explicitly what must also avoid this warning.

• How we produce several types of output (pdf, afp, etc.) from the single transaction pass?

  Hello

  Has anyone been able to produce more than one type of output (pdf, afp, etc.) of a single transaction in DM?

  And could you tell how you did it? (parameters fsiuser or other)

  We use 11.3 and 12.2 currently and that you are interested in generating output AFP and PDF simultaneously for each transaction.

  Obviously, we can perform the transaction twice, once using PrinterType = AFP and using PrinterType = PDF in the fsiuser.

  Looking for a way to do it in one fell swoop.

  Thank you!

  See the Guide to Administration of Documaker section 'ASSIGNMENT PRINTER PRINTER LOGIC BATCH TYPES'

  Should work for 12.2, may not for 11.3.

• I have an update showing several times in the list of downloaded updates

  I have advanced and deleted the Microsoft.NET Framework 3.5 Family Update (KB959209) x 86 update
  in the part "updates installed" my Windows update page (NO programs/uninstall programs from the Control Panel window)

  Well, when I conducted an audit of updates, that is returned. So I downloaded.

  Now I have two of these same entries displayed in the list off updates. That's it list that displays all the updates a downloads, NOT the list where you can uninstall the update. In this list, there is only 1 entry of
  Microsoft.NET Framework 3.5 Family Update (KB959209) x 86

  It causes problems that shows the update twice in the list?

  Ignore what you see in the history of the update. As KB959209 appears only once in theinstalled updates, you're good.

  [Yes, I'm everywhere this week! ]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Virtual machines showing several times

  Hey guys,.

  Anyone know why I see VMs appear repeatedly in vCOPS?  The only thing I could think is that cloning could cause that... but I was not cloning.  Any thoughts?  vCOPS Enterprise 5.7

  It looks like you use a solution of mirror/replication such as MRS. vC Ops will pick up the placeholder of virtual machines in a scenario of MRS and fill them, causing duplicate scenario you describe. Are you running SRM or mirror/replication solution?

  I want to look at the resources using the environmental component of the custom user interface. Check the vCenter IDs, "-vm", which will refine to you if it of a clone or not. Name is right, you have to look at the virtual machine single - and UUID to see if there are similarities, and if so, which. Also, check the date column creation to see when they were added, this will tell you when any chance happened which caused the resources "duplicated".

• How to print several times in BI Publisher

  Hi all

  We have a requirement of the company to print a report of the label...

  I generated the XML CODE...

  < XXLABEL >

  < P_ITEM_CODE > 11000046 < / P_ITEM_CODE >

  < P_RECEIPT_NUM > 62119 < / P_RECEIPT_NUM >

  < P_NO_COPY > 2 < / P_NO_COPY >

  < LIST_G_DETAIL >

  < G_DETAIL >

  < ITEM_NUM > 11000046 < / ITEM_NUM >

  < PO_NUMBER / >

  < MSDS_NUMBER > 2356989 < / MSDS_NUMBER >

  < DESCRIPTION > 1RING, WEAR-CASE, PUMP OVERPRESSURE-F / < / DESCRIPTION >

  < PANTRY > D01-JAOSB < / PANTRY >

  < BIN_NUM > EC.20.103 < / BIN_NUM >

  < / G_DETAIL >

  < / LIST_G_DETAIL >

  < / XXLABEL >

  Now, using RTF I want to print the number of copies xml happened dynamically...

  Can someone help me...

  Fixed it obtained

• The same artist is shown several times in the library - how to fix this?

  Hey everybody,

  I just imported some of my old songs in the iTunes library, which is organized by the artists in alphabetical order.

  But now, there is an artist who appears twice in the library. I checked the tags several times. It is the same for each album.

  When I'm traveling finder and check records to iTunes there is only one folder with the name of artists, containing all the music.

  So, how can it be? I have really no idea what's wrong right now.

  Thank you for your support in advance.

  The key field is the artist (obviously), but you can also check the Album artist field, which is used for sorting.  Looks like you are using the sight of artists to show your iTunes library, but it is more useful to use the sight of songs (simple list with columns) for troubleshooting this problem.  If the Album artist column is not a visible column in the view of songs , make it visible (line header right click to show/hide columns) and put it next to the column of the artist (drag to move left/right steering column).

  To ensure that all references to the artist and Album are the same, copy the entry that you want to use for this artists songs.  In a list of songs, select all songs from this artist.  Do a Get Info ( read the informationright click) on the selection.  In the window information from several element, Paste the name of the artist in the fields of the artist and the artist of the Album .  Check the view of the artists .

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• How can I fix error "changed default location for Windows Update files" that Fit-It notes several times, but does not solve?

  Using Windows XP Home Edition SP3, IE8, and Firefox 13.

  Used several times to install and MS Fit-It tool to try to fix Windows Update so that will download the updates of high priority.  4 four security updates not always settle.  Fix - It tool shows that "one or more Windows Update are configured incorrectly" and that it has been fixed (run 10 times).  He also pointed out "where Windows Update stores data has changed and needs to be repaired", but offers no solutions to fix this problem.  Cannot find any reference to this in the KB or MS answers.

  Is it possible to repair this problem and it will make a difference by allowing for installing security updates?  I talked to Ms. telephone and e-mail do not install security updates, but they say I have to pay $99 to get this issue fixed MS Update.  I thought I read that security patches are supposed to be supported without charge.

  Any new advice or techniques for solving this would be appreciated.

  Hello RickH999,

  Follow the steps in the article to reset the Windows update components and check if the problem persists.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps.

• I just bought the app for photographers creative cloud when I try finally connect with PS CC, I received an error message that says "no detected subscription. I don't really know how to solve this problem, I used my Adobe ID to connect several times

  I just bought the app for photographers creative cloud when I try finally connect with PS CC, I received an error message that says "no detected subscription. I don't really know how to solve this problem, I used my Adobe ID to connect several times and it just still the same message.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "