Lines show several times on State invoice

Similar Questions

• Element showing several times of SOE.

  Hello
  
  I added an element called 'Basic' once only in the input element. But it's also show 2 times in SOE reports and results of the series.
  
  How to remove it. PL. help.
  
  Thanks in advance.

  The item has been treated several times in payroll run and where you can see the item twice in the series results. Possible reasons could be

  1. the item has been prorated.

  How to check: check if the dates of beginning and end Date was populated in the form of race results for both inputs of the element.

  2. multiple element entries have been created for the element which was ruled out as you confirmed that there are no more entries in the element.

  3. performance results were triggered due to the indirect results.

  You can shoot some queries about this.

  Select * from pay_element_entries where element_entry_id in (select source_id from pay_run_results where run_result_id in (,))

  where id1 and id2 are run_result_ids of the two inputs result execution for the element.

  Perform above checks should give you the reasons.

  Kind regards
  Sharath

• Contacts showing several times

  Hello

  Given that I've updated the software on my Sony Xperia Z3 Compact my contacts then display several times.

  For example, for a contact I have their office work, work, laptop home and personal mobile all registered under a single entry, I have it synced with my gmail account and now when I discovered their account I see all their details twice, once as Gmail and then as phone contacts.

  I tried to delete gmail accounts, and this leaves no contacts on the phone.  When I reinstalled the Gmail account, Contacts on the phone return, duplicated with a phone list and a list of Gmail.

  Is there way to simple I can go to only display contacts Gmail, a bit like the old phones where you can choose to see the ony Sim contacts, phone contact only or both?

  This only started happening since I've updated the software on the device a week ago.

  Thank you

  You can try to delete data for the storage of contacts, this will remove the contacts on the phone. Then try to synchronize again.

• Artists showing several times but in the same media folder?

  Hi people,

  A bit of an irritating problem and that, despite several attempts to trouble shoot, I have been unable to solve.

  As iTunes traditionally organizes the library along the lines of the "Album Artist", I always used this tab to keep my library in order regarding artists.

  What I've noticed in recent weeks, it is that when I select artists in the sidebar, I could see:

  AC/DC: 5 albums, 70 song etc.

  Then below in the column of artists AC/DC, 3 albums 40 songs etc.

  I thought that this could be easily fixed by say changing the artist album to 'AAA' tags and which would group them together under a single artist label.

  Unfortunately no, what I get instead is the same as above only in AAA, that is to say

  AAA: 5 albums, 70 song etc.

  Then below in the column of artists another AAA, 3 albums 40 songs etc.

  Even when I try and change all new back to AC/DC, its still in the form view. As far as I can see, all the other values in the "Get Info" tab are the same.

  Basically when you go and look at the drive where the folder media, AC/DC of all albums are in one folder. They display properly in the media folder but showing not correctly in the application?

  Any ideas how I can fix it more irritating?

  On my mac, media folder is stored on external hard drive because of the size, the rest of the files in the folder music as a default value.

  Appreciate your help people

  Simon.

  See if this user tip solves your problem:

  Fix split Album or artist listings in iTunes

• How to show several times as output?

  I have a books_issue_details table. I would like to show as output
  
  Books table:
  book_id, book_name, author_name, etc...
  
  book_issue_details
  the columns book_id, issue_id, student_id, issue_date
  
  output:
  
  Title 1 issued o times
  
  Title 2 was published 4 times

  Outer join to use:

  with books as (
                 select 1 book_id,'A' book_name from dual union all
                 select 2,'B' from dual
                ),
       book_issue_detail as (
                             select 2 book_id,99 student_id from dual
                            )
  select  'Title ' || t1.book_name || ' has been issued ' || count(t2.book_id) || ' times.' cnt
    from      books t1
          left join
              book_issue_detail t2
            on t2.book_id = t1.book_id
    group by t1.book_id,
             t1.book_name
  /
  
  CNT
  --------------------------------
  Title A has been issued 0 times.
  Title B has been issued 1 times.
  
  SQL> 
  

  SY.

• I have an update showing several times in the list of downloaded updates

  I have advanced and deleted the Microsoft.NET Framework 3.5 Family Update (KB959209) x 86 update
  in the part "updates installed" my Windows update page (NO programs/uninstall programs from the Control Panel window)

  Well, when I conducted an audit of updates, that is returned. So I downloaded.

  Now I have two of these same entries displayed in the list off updates. That's it list that displays all the updates a downloads, NOT the list where you can uninstall the update. In this list, there is only 1 entry of
  Microsoft.NET Framework 3.5 Family Update (KB959209) x 86

  It causes problems that shows the update twice in the list?

  Ignore what you see in the history of the update. As KB959209 appears only once in theinstalled updates, you're good.

  [Yes, I'm everywhere this week! ]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Warning log message showing several times during registration to create/update

  When registering, the following error is repeated

  WARNING Sat Feb 14 15:38:15 CST 2015 1423949895405/atg/dynamo/servlet/pipeline/RequestScopeManager/RequestScope-1266341/atg/userprofiling/ProfileFormHandler use by default for the property ProfileTools

  / ATG/userprofiling/ProfileFormHandler use by default for the property ProfileTools

  This message appears like a billion times in newspapers. To be more precise, it appears more 30,000 times last week.

  Please let me know how to disable this warning and we want logging enabled for INFO, WARN, and ERROR.  Just to set the logging level to hide the newspaper is not the solution we are looking for.  Please let me know what is causing the log message appears in the ATG.

  Please guide me to find the solution.

  In your ProfileFormHandler you overloaded profileTools property? It seems that the ProfileTools of the resolution with the Null value and what is happening, it is that whenever the scope of the request initialization of ProfileFormHandler is to find the property of ProfileTools as null so that it throws this warning and initializes the ProfileTools component with the default.

  So, check if you have replaced the property ProfileTools or component itself or have changed its path which can be throwing error in the newspapers during the start-up or component initialization and initially it is null, and if you haven't changed it then you can also try to put profileTools = / atg/userprofiling/ProfileTools in your code ProfileFormHandler file property base to solve explicitly what must also avoid this warning.

• Virtual machines showing several times

  Hey guys,.

  Anyone know why I see VMs appear repeatedly in vCOPS?  The only thing I could think is that cloning could cause that... but I was not cloning.  Any thoughts?  vCOPS Enterprise 5.7

  It looks like you use a solution of mirror/replication such as MRS. vC Ops will pick up the placeholder of virtual machines in a scenario of MRS and fill them, causing duplicate scenario you describe. Are you running SRM or mirror/replication solution?

  I want to look at the resources using the environmental component of the custom user interface. Check the vCenter IDs, "-vm", which will refine to you if it of a clone or not. Name is right, you have to look at the virtual machine single - and UUID to see if there are similarities, and if so, which. Also, check the date column creation to see when they were added, this will tell you when any chance happened which caused the resources "duplicated".

• IOM 9.2 Child Table appears several times in the mappings of reconciliation

  Hello.
  I encounter this problem:
  
  Imported a resource from one computer to another,
  
  The resource has only one child form UD_PROFILES
  
  When I m generating maps of reconciliation in the seating process definition shows UD_PROFILES more than 10 times.
  When I map the table to one of those events of Reconciliación say MULTIPLE MATCHES table CHILD and does lie not the event are not linket to the user.
  
  I think there must be some kind of database problem (the definition girl line is several times in the database), but don't know where to look, and then remove them.
  
  Any ideas?
  
  Thank you.

  Check in the table in the SDH. Should not have more than one entry.

  Published by: Rajiv Dewan

• receive the following error code when searching for a piece of music I did several times without a music problem but have recently updated Firefax: Fatal error: Call to undefined function AmazonData() in/home/boss/public_html/mc on line 13

  I am in the page web http://www.songarea.com/ and after searching a piece of music, I get the following error message:
  "Fatal error: Call to undefined function AmazonData() in/home/boss/public_html/mc on line 13.
  I did this several times before without a problem, but have recently updated Firefox with the Skype add-on and wonder if the two things are related.

  URL of affected sites

  http://www.songarea.com/

  Hi John,.

  It is an error message from the web server providing this site. Specifically, it is something wrong with their PHP code.

  It is not browser specific and would go into another browser besides Firefox.

  You will need to contact the webmaster of this site to report this problem. A quick test does not show this problem, but you do not specify what search query, you tried:

  http://www.songarea.com/music-codes/test.html

• I deauthorised all my computers several times and iTunes still shows that I have authorized 5.

  I allowed off all my computers several times and iTunes still shows that I have authorized 5. I can not re - allow one of my computers and cannot allow overall because I did last October. I tried a logout and back logging, remove the SC info folder etc... Any ideas?

  I allowed off all my computers several times and iTunes still shows that I have authorized 5

  Normally, you can only authorized computers off once a year.

• Photos 1.3 "JDK 8 Update 73" shows under the heading import on the left.  I also have a pop up telling me to install it in safari.  Have already installed several times.  Any ideas?

  Photos 1.3 "JDK 8 Update 73" shows under the 'Import' section on the left.  I also have a pop up telling me to install it in safari.  Have already installed several times.  Any ideas?

  Looks like pictures which I assume you mean Apple's application to view and edit photo files is a 'disk' called JDK 8 update 73 ad.

  This implies that you have downloaded and mounted a "disk image file" for the update of Java and it is always 'mounted '. However the fact that you are still being harassed to install it in Safari implies that you have not run the update of Java installation package that must be inserted into the drive.

  Then, go back to the Finder and look for a drive in a window of Finder called "JDK 8 updated 73'. Click on that in the window of the Finder and the window should then list the contents of this disc. In this list should be something obviously to do with the installation, most of the installation files have an extension of the .pkg file, it could be called 'update Java 8 73.pkg. Double-click or open the pkg file and follow the instructions.

• Safari address bar showing several addresses at the same time

  Anyone else having problems with the address bar. No work to present frequently visited sites and and after visiting the sites manually or via Favorites addresses are crushed between them (showing several addresses at the same time).

  I have the same problem since this morning, after the EL CAPITAN update

• "Several times I am receving the dialog box with" visual basic command-line compiler.

  "Several times I am receving the dialog box with" visual basic command-line compiler.

  Hello

  1. This occurs when you use a specific application or all applications?

  2 did you a recent software or changes to the material on the computer?

  3. have you installed all versions of Visual studio?

  4. What is the finished message, that you have found?

  You can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Why dial-up connections keep loading when I'm already in line several times?

  original title: dial-up connections

  Why dial-up connections keep loading when I'm already in line several times?

  Why dial-up connections keep loading when I'm already in line several times?

  A possible scenario would be to have an ADSL PPPoE connection for your primary link and a secondary dial-up link.  So if a DNS lookup fails because the PPPoE connection is not completely connected to the Internet Windows would try to use the link to remote access instead of doing whatever it was necessary to wait for the first to work.  Even after the PPPoE connection is fully established, it would be always possible to have no research to trigger a second test on the remote access link.  A solution would be to delete or disable the link to remote access.  In any case an average minimum of change the symptom would be to change the connections settings never compose...

  FYI

  Robert Aldwinckle
  ---