How to shrink the partitions using mdt

Similar Questions

• How to make the partitions using the toshiba restore CD

  Hi forum users. I just want to explain more on creating partitions using our Toshiba Recovery CD. I have a portable satellite A50-101.

  I searched some topics on this forum and found this post from Quad. Just follow these steps carefully and you'll be successful to make the partitions on your hard drive.

  Here is the message by Quad.
  ######################
  Hi forum users

  If anyone of you needs an accurate description of installation of operating system using Expert mode, maybe this can help you.

  When the recovery process has begun there are menu where you can choose between two modes of installation.
  1 standard mode
  2. expert mode

  At first he put there important warning: all data stored on your computer will be lost. It is also important that hollow a Standard installation partition will be created and all data on the hard drive will be lost.

  If you want to install the operating system on a partition, please use Expert mode. In this case, the software can be installed on an existing partition. Alternatively, you can make one by yourself.

  If you want to make a partition with a set capacity, please do it on this path:

  1. choose number 2 Expert mode pressing
  2 approve OK key ENTER
  3. choose LOCAL > DISK > image
  4. look in: must be selected for the CD-ROM drive
  In the Middle window choose GHO file and press ENTER
  5. using the TAB key you must mark the player information and so on and press ENTER
  6. using TAB button again part brand of window average (blue line) and with SPACE activate new dimension box
  7. place inside the new size of the partition and press ENTER again
  8. the question to continue with load disc? confirm with OK

  I hope this can help you to make the desired partition size.

  Good bye
  ######################

  At step 6 above, enter the size of the partition you want. Size must be entered in megabytes (MB), gigabytes (GB). (mine is 40 GB HDD, i.e. 38146. I go to half, 19073)
  Proceed with the disk load? Click OK.

  It will now recover your machine to its factory setting. 2 partitions will be made.

  Once the restore is complete, open my computer. You'll see only drive Local (c) on hard drives. Click on properties and you will see that the size that you specified in step 6 above (20 GB). So, where's my other 20 GB? It is a way to treat 2 to make a new logical drive.

  Follow this link: (these links has screenshots for easier understanding)

  http://www.theeldergeek.com/hard_drives_07.htm - create an extended Partition (step 1)
  http://www.theeldergeek.com/hard_drives_08.htm - create logical drives in an extended Partition. (Step 2)

  I hope this can help you make a new logical drive in an extended partition. :)

  Hi 012

  Thank you very much for your posting. I forgot to mention that the logical drive must be created because the unusable space do not appear by Windows.

  But there are users like you to help. Respect!
  Fashion Expert recovery procedure section is now perfect.

  Good bye

• How to extend the partition C on Satellite L450 - 17K

  Hello

  I'm working on how I can change the size of the partition on my hard drive my C drive is nearly full, and D is a pain to keep anything on that most of what I have links to my Ipad that does not detect it when its on drive D!

  Is there anyway to delete the partition or change the size of it without losing my data or having to restart my system?

  Thanks in advance

  Hello

  It is possible to change the size of the partitions in the management of the disks in win 7.

  But you will not be able to shrink the partition D and add this free space on the C partition using the Windows option because the free space would be created after the D partition.
  To move the free space between D and C partition a 3rd party software is necessary.

  I recommend the use of a tool called * GParted.*

  It s freeware and you can use it to manage your partitions on the HARD disk.

• How to configure the partition table for SSD?

  Drive: 32 GB SSD

  I accidentally delete without backup partition table information and would like to know how to put the partition table, I can access the tools of partition table, but do not know how to define.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Hello

  Thanks for posting your query in Microsoft Community.

  The SSD could be seen in the disk management window, and you could name and set up as another hard drive internal. To create a partition or volume on a hard disk, you must be logged in as an administrator, and there must be unallocated disk space or free space in an extended hard disk partition. To repartition your hard drive, please consult the following link and check if it helps.

  I can I repartition my hard disk?

  Additional information:

  Create a new Partition on a hard disk in Windows 7

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How to remove the partition from disk on Tecra?

  Any ideas how to remove the partition that Toshiba create by default when the operating system is installed?

  Hello

  Which partition do you mean? And what laptop do you have?
  I got my satellite repeatedly and didn t see any partition made by Toshiba.

  Of course, I read in this forum that some owners of Qosmio with Qosmio player have this partition that has been specially designed for the Qosmio player.

  So, what do you mean exactly?

  PS: If you want to remove a single partition if you do to the title of the disk management in the computer management option.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• How to identify the fonts used in text format?

  How to identify the fonts used in text format?

  Hi DSB.

  Open the document in Reader, go to the menu file-> properties, then click on the tag are. You will see a list of the fonts used in the document.

  Another option is to copy the text and paste it into MS Word, where you can simply move your mouse over the text to display the name of the font.

  Kind regards

  Nicos

• How to know the database uses pfile or spfile?

  Hi guru
  
  How to know the database uses pfile or spfile?
  
  
  
  Thank you

  Thank you for this question of doc!
  Please type in sql * show spfile parameter.
  If it is empty, you do not use a spfile.

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• Help, how to query the database using pagination

  Hello
  
  How to query the database using paging for large data.
  
  any API for this?
  
  Thank you in advance!

  Hello

  You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

  John

• How to set the partition active windows 7 using the command line

  I activated the system recovery partition, so the windows partition is disabled and I can't start Windows

  Partition Wizard Home Edition:
  (There is also a CD bootable version, this allows to change the partition 'Active')
  http://www.partitionwizard.com/free-partition-manager.html
  Some of the features and functions include: resize and move partitions, Partition recovery after an accidental deletion, Create partition, Delete partition, format partition, convert partition, partition Explore, Hide partition, change the drive letter, the active value partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to change the partitions on the Satellite P870-026

  Hello

  does anyone know how to partition the HARD drive on a P870 Satellite with Windows 8 (if the material of the BONE).
  I used the options in disk management. The problem is that I can't shrink less than about 450 GB lecteurC. It is a new laptop and features a 1 TB HDD and 50 GB used only at present.

  I defragmented the HARD drive, but it made no difference.
  Thank you

  I presume you are aware that a "hidden file" is the reason why you can't resize.

  This [http://www.partitionwizard.com/free-partition-manager.html] is supposed to do the job. Software free EASEUS ([http://www.easeus.com/partition-manager/]) can do. (I think you need to very careful to install the software. I believe that unless you read each screen and check / uncheck boxes carefully it will have changed your homescreen internet, search engine and installed more software).

  BUT
  Any root you choose, make sure you have prepared Windows etc. recovery disks so that you can restore your pc to a shipped State. Do some searching on Google on things like "install the bigger hard drive" "change the size of the partition during the installation of windows" "create a cd bootable/memory stick ' and the popular"migrates to ssd drive"and you will pick up a lot of advice. I don't know if the Toshiba recovery disks repartition a drive to match the original configuration.

• How to add the partition to the T400 (Vista 64-bit)?

  I just had my T400 yesterday uninstalled all nonsense, updated and installed all my applications.  the process took several hours.  Then, I used Acronis Disk Director 10 (boot cd) to divide the C: partition into two, so that I could move my documents on a separate partition.  The separation went well, but when I rebooted, something lenovo recovery and rescue came and supposedly repaired my partition table (haha).  Well, after that I was not able to connect to windows, even when I deleted the new partition, which I did.  I had to do a reinstall factory and I am now in the process of updating all new

  Anyone know how I can make a partition without the thing rescue and recovery lenovo panic?

  Thank you!

  Start > run > type "diskmgmt.msc" without the quotes, and then click OK.

  You shrink the 'C' drive, and then create a new partition.