How to simulate cRIO in labVIEW?

Similar Questions

• How to simulate a right-click in LabVIEW

  I write code in LabVIEW to record the activities of the mouse for example move, click on the mouse and the right click of the mouse to the left.  I'm able to reproduce the movement by dragging and click of a mouse., but the right click of the mouse to the left.  Can someone show me how to simulate a RIGHT mouse click in LabVIEW?  Thank you very much.

  Son

  Have you looked into the case of the structure of the event time-out?

• How do simulate you a right-click of the mouse on the touchpad?

  How do simulate you a right-click of the mouse on the touchpad?

  You open the Boot Camp Control Panel and put in place the pad to work how you want it to run. I have the lower-right corner of the touch pad as a right click.

• How can I get the LabView return standard splash screen after installation of the evaluation of Robotics module?

  I installed the Labview Robotics module for evaluation, but when I start now Labview I meet the following start screen:

  

  How to bring back the Labview standard splash screen?

  Terje,

  When LabVIEW Robotics is installed, it replaces the file LabVIEW get a window on the way.  You can return to the standard window began to to repairing the installation of LabVIEW:

  1. Go to add/remove programs from the control panel.
  2. National Instruments -click and select Change/Remove.
  3. Choosing to fix LabVIEW.
  4. Insert the LabVIEW Setup disk if you have an or navigate to the network location that you used to install LabVIEW.
  5. After you have repaired LabVIEW, you should be able to restart with the default value getting started window restored.

• How to simulate GPS on blackberry tablet.

  How to simulate GPS on blackberry tablet.

  I have seen this thread but does not have the relevant information.

  Kindly let me know setp by the set procedure.

  I guess that this post would be useful... to simulate the GPS close to Charlottesville, WILL

  jtegen wrote:

  Here's the simulator of GPS functions.  Works very well to work around the fact that the Simulator simulates a GPS and I don't have a PB (yet).  This Simulator is near Charlottesville, Virginia.

  package gps{    import flash.events.Event;    import flash.events.GeolocationEvent; import flash.events.TimerEvent;   import flash.sensors.Geolocation; import flash.utils.Timer;
  
  public class GpsPositionDriver{  private var timer        : Timer = new Timer( 2000 );  private var gps_service  : Geolocation = null;  private var last_step    : int = 0;  private var data         : Array = new Array();  private var start_time   : Number = 0;
  
  //////////////////////////////////////////////////////////////////public function GpsPositionDriver( sensor : Geolocation ){ this.gps_service = sensor;    this.timer.addEventListener( TimerEvent.TIMER, Ping );
  
    var now : Date = new Date();  this.start_time = now.getTime();
  
    // data   this.data.push( { altitude : 600, heading : 45, hacc : 100, vacc : 100, latitude : 38.020654096686464, longitude : -78.53692074499511, speed : 10 } );    this.data.push( { altitude : 601, heading : 46, hacc : 100, vacc : 100, latitude : 38.02160072090434, longitude : -78.53949566564941, speed : 12 } ); this.data.push( { altitude : 601, heading : 270, hacc : 100, vacc : 100, latitude : 38.022090932211185, longitude : -78.54177017889404, speed : 13 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02234448849692, longitude : -78.54357262335205, speed : 15 } );
  
    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02242900706387, longitude : -78.5454179831543, speed : 2 } );  this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.022344488497076, longitude : -78.54835768423462, speed : 3 } );    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02227687357351, longitude : -78.55168362341308, speed : 5 } ); this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02210783599131, longitude : -78.55638285360718, speed : 1.5 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02187118272113, longitude : -78.56230517111206, speed : 1 } ); this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02166833645269, longitude : -78.56691857061767, speed : 5.5 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02166833645269, longitude : -78.57022305212402, speed : 5 } ); this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.022006413255085, longitude : -78.57387085638427, speed : 5 } );    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02283469482895, longitude : -78.57738991461181, speed : 2.5 } );   this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.02454193955506, longitude : -78.58196039877319, speed : 17 } );    this.data.push( { altitude : 601, heading : 275, hacc : 100, vacc : 100, latitude : 38.0275675527831, longitude : -78.58826895437622, speed : 8 } );  this.data.push( { altitude : 601, heading : 290, hacc : 100, vacc : 100, latitude : 38.029832455209, longitude : -78.59288235388183, speed : 7 } );   this.data.push( { altitude : 601, heading : 300, hacc : 100, vacc : 100, latitude : 38.0320803861371, longitude : -78.59751721105957, speed : 10 } ); this.data.push( { altitude : 601, heading : 25, hacc : 100, vacc : 100, latitude : 38.033009961471976, longitude : -78.59901924810791, speed : 12 } );    this.data.push( { altitude : 601, heading : 30, hacc : 100, vacc : 100, latitude : 38.034598662916025, longitude : -78.6012508460083, speed : 11 } );
  
  }
  
  /////////////////////////////////////////////////////////////public function Start() : void{    this.timer.start();}
  
  /////////////////////////////////////////////////////////////public function Stop() : void{ this.timer.stop();}
  
  /////////////////////////////////////////////////////////////////private function Ping( event : Event ) : void{  var now : Date = new Date();
  
    var evt : GeolocationEvent = new GeolocationEvent( GeolocationEvent.UPDATE ); evt.altitude           = this.data[this.last_step].altitude;  evt.heading            = this.data[this.last_step].heading;   evt.latitude           = this.data[this.last_step].latitude;  evt.longitude          = this.data[this.last_step].longitude; evt.horizontalAccuracy = this.data[this.last_step].hacc;  evt.verticalAccuracy   = this.data[this.last_step].vacc;  evt.speed              = this.data[this.last_step].speed; evt.timestamp = now.getTime() - this.start_time; // ms from runtime initialized
  
   this.gps_service.dispatchEvent( evt );
  
    this.last_step++; if( this.last_step == this.data.length )this.last_step = 0; // reset
  
      }  }}
  

• How save/simulate an arrow key?

  Hello

  I need to register the software simulation using:

  -arrow keys (for the input field/menu selection).

  -Return the key (for the validation of choice).

  Capture screen is, of course, is not a problem, as I do it manually.

  What I did find is: how to simulate a button arrow.

  IE: tell the user of the lesson to "press the arrow key to enter the menu of xxxxx." and do it...

  I tried to use the field text, with empty response and with arrow key down as validation key, but it does not work...

  Thank you.

  Hello

  It helps please, if you tell us what version of Captivate you use.

  For more interactive objects (click boxes, buttons, text input boxes), the user can get a "successful action" by clicking (for Click box, touch or the Send button to a text entry area) OR by using a keyboard shortcut. By assigning this shortcut key (e.g. Enter), you allow the user to use this key. CP5, you'll find it in the property Panel, area Action. For CP4 find you this shortcut key in the p.e. Button, first tab properties dialog box.

  Lilybiri

• How to simulate overprinting in Acrobat Standard?

  I know how to simulate overprinting in professional but it is in the standard?

  anyone?

  You ask what about printing or display?

  I will answer from the point of view of Acrobat 9 Standard.

  Display: in the preferences > display the Page in the "Page content and information" section, you have a few options for the simulation of overprinting. (Only for the PDF / x files - this is the default;) Never, always, automatic). Automatic examines the document for any content which should simulate overprint preview IT to display as it would when printing. Acrobat 8 should have similar, but not all options.

  Printing: You cannot simulate overprinting when printing Acrobat Standard. (I refer to the parameter in the Advanced Print dialog box in Acrobat Pro that allows you to simulate overprinting in the printed output for proofing on a printer that does not support overprinting)

  Does that help?

• How to simulate 6211 NI and NI 9213 modules in LabVIEW?

  Hi all

  I worked on a VI in LabView 2011 which communicates with the NI 9213 modules NI 6211. I am currently overseas and I would like to continue to work on my VI without going through the devices physically connected to my computer. Is there a quick and easy way to simulate these devices or replace them with those virtual so that I can test my programming?

  Kind regards

  Thomas

  Go to MAX and right-click devices and select Create > New > DAQmx simulated device and choose the devices you want to.

  Note: I'm writing from my phone and read is perhaps not right - I'm going from memory, but you should be able to understand. In addition, the simulation functions are quite limited. For example, the analog input is only a sine of 1 kHz.

• How to debug the program Labview that runs in the target of the RT of a Compact RIO

  I use CRIO-9073 for the acquisition of data from sensors. Program Labview is written in RT target and target FPGA. It is posssible to make step wise execution for the program written in the target RT and FPGA target the way purpose us for the debugging of the program in general OS.

  MJM,

  The only way to use the debugging on a VI wrote to FPGA tools is to simulate running on the host computer. You can then deploy the compiled FPGA code on the target and run your VI RT in debug mode if you use the communication of the façade with the host PC.

• How to simulate a right CTRL key on a Satellite M30?

  Hello!

  I don't have a right CTRL key on my Satellite M30. But one of my frequently used desktop application need this key and redefine in the request is not possible. How can I simulate this right CTRL key on my laptop?

  Hello

  Read the user manual. There, I found the info that the key combination FN + Ctrl simulates the right CTRL key to extended keyboard.

• How to extract file with LabVIEW Teststand global variables

  Hello

  My goal here is to extract all the contents of the global variables for file (names and the value of any types) in a sequence of my LabVIEW UI file.

  For now, I can only open a file of sequence of LabVIEW and get the number and the names of the variables (cf. vi) attached.

  But if my variable is a container, I would like to know all the contents of this container (and so on) and I don't know how to do it.

  In addition, I have to extract the value of variables that I don't know the type in advance...

  Can you help me?

  Thank you.

  Well I finally used the method "GetNthSubProperty" to work on each variable and I use the property 'Type' to know if it's a number, string, boolean, or a container. If it is a container, I repeat the process at a lower level... (see attached vi)

• How can I connect a Labview XY (cluster of 2 tables) TestStand 2010 SP1 chart and do appear correctly in the report?

  Patterns of data record TestStand 2010 SP1 default shared this cluster in two tables stored as binary data, resulting in two graphs displayed in the report: one for data and one for X data Y. We need the elements X and Y, couples on the same graph. This cluster is marked for logging as a step output variable. It seems possible to add a table "PROP_XYGRAPH" (similar to the PROP_ANALOGWAVEFORM) to the schema to simplify the other treatment after the database record, but how can we get the Builder, to accept this type of data is displayed correctly? XY graphics come from LabVIEW 2013 SP1 exclusively as a cluster of two matrices, usually between 500 and 1,000 items long.

  ... Geoff.

  Hello Geoff,

  Had a few resources for you to check. Let us know if none of them work for you.

  Inserting an image of LabVIEW Control:

  <>http://www.NI.com/example/30736/en/ >

  Display of graphics in TestStand:

  <>https://decibel.NI.com/content/docs/doc-38945 >

  Display of measurement data in the shape of graph:

  <>http://zone.NI.com/reference/en-XX/help/370052J-01/tsref/infotopics/measurement_data/ >

  See you soon!

• How to protect the piracy labview application

  To begin to create an application for the market, the first thing that comes to mind are the issue of piracy.

  So, I wanted to know how an application labview base could be saved by piracy.

  The same technology license such as LabVIEW

• How to use my 2012 LabVIEW for run the LeCroy Waverunner 610Zi?

  Hi all

  I'm a fresh starter on this topic. I have the 2012 version of LabVIEW and a scope of 610Zi LeCroy WaveRunner. How can I use LabVIEW for control the scope?

  Hello sqrtT,

  I think you and I just had a phone conversation about this, and you're all set!

  I would like to know if I'm wrong and I'll give you instructions for you.

  See you soon,.

  Leonard Brown

  Technical sales engineer

  Teledyne LeCroy

• How to connect cRIO with computer via cross cable

  I want to connect cRIO 9012 with my computer via cross cable and my computer with internet connection via WI - FI and I want to send messages through cRIO so cRIO uses my connection to the internet the computer to send mail.

  Here I have 2 connections 1. Wireless LAN connection IE between cRIO, computers and 2) between my computer and the internet. Now, I want to send a mail through cRIO via my computer.

  Thank you.

  This will get you started with the establishment of the link connection:

  http://digital.NI.com/public.nsf/allkb/4E13E46226E67642862576A4007BC353

  For what is to turn your desktop into a gateway for the cRIO, I've never tried, but it might work for you:

  http://support.Microsoft.com/kb/306126

  Please let us know how it goes!