How to sort members in the Query Designer XL?

Similar Questions

• How to disable autojoins in the query designer

  Hello
  
  When I add several tables to the query generator window graphic in SQL Developer I get automatically all possible variants of joins between them. Tables in the database have multiple foreign keys, and even with a few tables, the net of the linkages between them become quite incomprehensible. The only way to work around that I have found is to manually remove all the links after each addition to the table. It's still very painful and embarrassing, and of course with each new table there are a greater number of links to delete. It is possible to add a table to the query generator without automatically creates links?
  
  Best regards
  Vladimir.

  Hi Vladimir,.

  There is no preferences to control the Query Builder, but rather than leave a request it via drag & drop of tables/views of the tree of the browser, why not start instead with the spreadsheet by typing in something very minimal as:

  SELECT * FROM JOB_HISTORY, JOBS, EMPLOYEES, LOCATIONS
  

  Then, switch to the Query Builder tab (just not joined tables will appear) and add the joints as you wish. The completion feature Insight can help speed up by typing the name of the table/view and can also avoid a performance problem with Query Builder drag & drop.

  Hope this helps,
  Gary

• How to specify an outer join in the query designer

  I quickly built a large query with the query designer, and it works very well, but does not produce 9 disks on 2200 - so I need to change to an outer join.
  
  My problem is that I can't find a way to specify an outer join. I tried to change the query, query builder formed, but it won't let me.
  
  I know that I can capture the query, edit and run it in sql developer and that works fine, but I want to use the Query Builder as it is the fastest way I know to quickly add and remove items - my users don't know exactly what that it to include.
  
  I know it's kind of a trivial question, but I searched the forum, manual, the web and no luck
  
  Thanks for any help you can give
  
  Glenn

  Hi Glenn,.

  When you use the query designer to create the sql statement, you must click on the empty box to the right of the fields in each table to create the join. When you are finished, you should see a line drawn between the two tables. Click on this line, and a small window appears allowing you to select inner outer or right outer joins, left.

  When the report was created, however, you must change the statement. For example, if you use the query designer to join DEPT at EMP based on the DEPTNO field on the two tables, you get:

  select      "DEPT"."DEPTNO" as "DEPTNO",
        "DEPT"."DNAME" as "DNAME",
        "DEPT"."LOC" as "LOC",
        "EMP"."EMPNO" as "EMPNO",
        "EMP"."ENAME" as "ENAME",
        "EMP"."JOB" as "JOB",
        "EMP"."MGR" as "MGR",
        "EMP"."HIREDATE" as "HIREDATE"
   from      "EMP" "EMP",
        "DEPT" "DEPT"
   where   "DEPT"."DEPTNO"="EMP"."DEPTNO"
  

  This is to change:

  select      "DEPT"."DEPTNO" as "DEPTNO",
        "DEPT"."DNAME" as "DNAME",
        "DEPT"."LOC" as "LOC",
        "EMP"."EMPNO" as "EMPNO",
        "EMP"."ENAME" as "ENAME",
        "EMP"."JOB" as "JOB",
        "EMP"."MGR" as "MGR",
        "EMP"."HIREDATE" as "HIREDATE"
   from      "EMP" "EMP"
        LEFT OUTER JOIN "DEPT" "DEPT" ON "DEPT"."DEPTNO"="EMP"."DEPTNO"
  

  Andy

• How export (unload) result of the query without running query on sql developer

  Hello
  
  I want to know how export (unload) result of the query without running query on sql developer.
  
  I know this way.
  1. execution of query
  2. click on "Download" on the results tab
  http://i.stack.imgur.com/CQ4Qb.jpg
  
  
  Is he available unload a query result before the race?

  No, but you can do this ask the developer SQL change however, for other users can vote and add weight to the possible future implementation.

  Kind regards
  K.

• How do I dynamically change the query VO

  Hello
  
  IAM trying to change the VO query dynamically. My forced, it is that I have 6 columns in a page header 3 columns (single default) for objective sort and another 3 columns (the default one) for querying data.
  
  Al, are in a single view so I created a VO.
  
  Sort of research
  AN A
  B B
  C C
  
  When I give all sort values and hit the query of VO submit button should change dynamically.
  I searched old post in this regard.
  
  My query is something like that
  
  SELECT * from cust_table where a = NVL (: 1, a)
  UNION
  SELECT * from cust_table where a <>NVL (: 1, a)
  order by one
  
  IAM not trying the Sub part dynamicaly in my AM method
  vo.setWherecaluse ("where a = NVL (: 1, a)")
  UNION
  SELECT * from cust_table where a <>NVL (: 1, a)
  order by one ").
  and trying to pass parameters to the query. But it does not work. In error "variable binding is not found.
  
  The one you suggest how to solve the problem.
  
  
  Thank you
  Mahesh

  Mahesh

  Please let me know the logic behind the union of the same query with it. What is the problem you are having with
  vo.setWhereClause

  Thank you
  AJ

• How to sort and organize the desktop icons in Windows Vista?

  How do sort you the icons on the desktop by name or lock the desktop under Vista icons

  Right-click on the desktop and click view.
  To get the icons to stay where it is placed on the desktop.
  Click on align on the grid and automatic uncheck their reorganization.

  To have the icon to align with the grid
  This will keep the icons of overlap between them.
  Click on snap to grid.

  To have the icons align automatically:
  The icons will be automatically aligned in the upper left corner of the office.
  Click Auto arrange.

  Not sure if that's what you are meaning.
  Let us know if that helps.

  Marilyn

• How to add members to the local group

  Hello

  I use vRA 7.1 and have configured the vRO local authentication provider by the following:

  Authentication mode: vRealize Automation

  Host address: https:...

  The admin group: vsphere.local\vroadmingrp

  By default the tenant: vsphere.local

  Everything works ok, but I want to add members to the vroadmingrp in vRA Identity Manager.

  If I register as an administrator by default, tenant, I get to the screen 'Edit Group' in the 'Administration' tab, but there is no way of actually adding members to the group.

  (ie. no green more don't sign, just a screen with)

  This group has the following members.

  E-mail name (0)

  No data selected

  )

  So, my question is, how do I add a person?

  Concerning

  Tony

  I'm sure that in 7.0.1 you can do that again. There is a horizon of the user interface to change the groups for vIDM but is not yet available in vRA UI.

  Chris

• the search for empty cells by using the query designer

  Hello

  I'm trying to exclude empty cells in a field (by using the Query Builder), and I did:

  xDocumentSource < match > "CDL".

  < AND >

  < NOT > (xRelatedMsgid < match > "" "")

  but it does not work. I tried "NULL", but it does not work either. Could someone tell me how to do it (or where I can find examples of queries).

  Kind regards

  Iwona

  https://blogs.Oracle.com/Kyle/entry/searching_for_null_values_ucm

• What is Tri merger and what the syntax or how to sort merge in the optimization of the performance

  
  Hello

  new IAM for performance how to sort merge and when to do it.

  Thanks in advance.

  Hello

  Merge sort is a method to join two sets of results, which is essentially:

  -First game on the join results sort key

  -Then put spell on the join key

  -Then merge them to produce the output

  Like other methods (hash join, nested... loops joins) the cost of the operation is calculated by the CBO, which chooses the cheaper plan.

  You can force the plan with the use_merge hint... but why would you do?

• How do I check how much time running on the query server

  Hello
  
  I work as a junior DBA. The guys on the team application gives the SID from v$ session and asking me how long running this query.
  I'm connecting ther server and get the PID and cpu utilization on unixbox, but cannot get it question time.
  Pls help help get duration/how running queries. Verion Oracle's 9i.
  
  SQL > select * from v version $;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
  PL/SQL Release 9.2.0.8.0 - Production
  CORE Production 9.2.0.8.0
  AMT for Solaris: 9.2.0.8.0 - Production Version
  NLSRTL Version 9.2.0.8.0 - Production
  
  Kind regards
  Vincent

  >
  This means 113547 minutes. Right?
  >

  Yes, it's true. But it is not a few Minutes but microseconds. ELAPSED_TIME is microseconds (10g or higher. Not sure about 9i. Please check the doc)

  >
  Number of executions increasing very fast now its 29999. with in wrigting mail its increase. to get the output why this query execution of this many times.
  >

  This means there are a few sessions by running the same query (which is fine). Only, you will need to tell us why the query is run that many times :) Maybe, you need it!

  Published by: user12035575 on September 11, 2011 14:38

• compose the query without using the query designer

  New on this BEEP 10.1.3.4.1 product,
  
  questions
  
  1. is there a way to compose a query without using query builder but still has a way to see the result of the query under the PIF?
  
  2. How is - a to compose a query prompt? I know that I can create parm after you create the data set, but at the stage of all data already call you query prompt as where employee id =? E_ID? or just not where clause
  
  
  Sorry if these questions are too rudimentary, but I did not see that what we have answered according to the user's guide.
  
  Thank you.
  
  
  WAN

  When you select the 'View' link, you should be able to see this option.

• How to sort members by alias names

  I am trying to create dimension rule which will sort the dimension members in ascending order, but it must be based on the name of the alias instead of the member name.
  
  I tried the two Parent-child and generation number, but it does not work.
  
  For example
  
  for members of the city PSE (purchase alias name) and USALB (aka Albany) should be sorted by alias names
  
  the current order is
  PSE (Purchase)
  USALB (Albany)
  
  but the requirement has to be
  USALB (Albany)
  PSE (Purchase)

  I'm not whay you say by the multiple keyword, you can certainly use two load rules within a single import dimensions statement. It would be disastrous if you couldn't. But according to your question, yes you can use the same rule of load to import a text file and a sql table. It would be just like using two rules in the statemtent of load. Here is a sample of the reference of the technology using sql and flat files in a statement
  Import database sample.basic dimensions
  Server text data_file "test" using the server rules_file "test."
  Server text data_file 'level' help Server rules_file 'level ',.
  log in as 'usrname1' identified by 'password1' using the server rules_file "test."
  log in as 'usrname2' identified by 'password2' using the server rules_file "test".
  Error adding to 'C:\Hyperion\products\eas\client\dataload.errr ';

• How to make text in the query of the child

  Hello
  
  I need to put a text where are child records that says "not found IN.."
  
  Oracle 10G
  report design consist of recordings of group and the child a man
  
  ex:
  
  main subquery
  P44001 desc BOMqty date1 total qty line1 ponum1
  .. .date2 qty line12 ponum1
  .. .date2 qty ponum2 line3
  
  P44002 desc BOMqty don't total "no found in.".
  
  P44003 desc BOMqty date4 total qty 4 ponum1
  ... date2 qty line2 ponum1
  ... date2 qty line5 ponum2
  
  
  Thank you
  Harsha

  Hi, Harsha,

  This sounds like a job for OUTER JOIN.
  For example, using tables of scott:

  SELECT       d.deptno
  ,       d.dname
  ,       NVL2 ( e.deptno
              , e.ename
              , 'No emp found'
              )     AS ename
  FROM              scott.dept  d
  LEFT OUTER JOIN      scott.emp   e  ON  e.deptno  = d.deptno
  ORDER BY  d.deptno
  ;
  

  Output:

  `   DEPTNO    DNAME             ENAME
  ----------    --------------    ------------
          10    ACCOUNTING        CLARK
          10    ACCOUNTING        KING
          10    ACCOUNTING        MILLER
          20    RESEARCH          JONES
          20    RESEARCH          FORD
          20    RESEARCH          ADAMS
          20    RESEARCH          SMITH
          20    RESEARCH          SCOTT
          30    SALES             WARD
          30    SALES             TURNER
          30    SALES             ALLEN
          30    SALES             JAMES
          30    SALES             BLAKE
          30    SALES             MARTIN
          40    OPERATIONS        No emp found
  

  Notes deptno = 40, which is located in the Department, but not in the EMP.
  If ename happened to be null in the emp, then the NULL appear in the ename column. If ename cannot be NULL, you can replace the NVL2 expression with

  NVL (e,ename, 'No emp found')
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  If you can demonstrate the problem using tables commonly available (such as the scott schema) then you don't have to display the sample data: right after the results and explanations.
  Always say what version of Oracle you are using (for example, 10.2.0.4.0). There is no version 10F or 10H, so it's kind of silly to say you have 10G
  See the FAQ forum {message identifier: = 9360002}

• How to check schedules in the query

  Hi team
  
  I need to check schedules query below. Could you please suggest me?
  
  SQL > SELECT present.object_type, present.object_id
  2 (SELECT cb2.object_type, cb2.object_id, incident_status_name,
  3 incident_severity_name
  Cs_brm_3d_service_request_v cb2 4,
  5 cs_incidents_all cia,
  jtf_rs_groups_vl 6 jrgv
  7 WHERE cb2.record_status = 'PRESENT '.
  8 AND (cb2.incident_id = cia.incident_id)
  9 AND cb2.incident_severity_name = "emergency".
  10 AND cb2.incident_type_name = "RTS Customer Service Request"
  11 - AND cb2.incident_status_name = 'open '.
  12 AND cia.status_flag = 'o'
  13 AND cia.owner_group_id = jrgv. GROUP_ID
  14 AND jrgv.group_name IN ('RTS', 'RTM', 'NTN')
  15 AND cb2.close_date IS NULL
  AND 16 (cb2.last_update_date < = (SYSDATE - 1 / 1440))) present
  17. WHERE 1 = 1
  18. AND ((SELECT 1
  19 OF THE DOUBLE
  20 WHERE TO_CHAR (SYSDATE, 'dy') NOT IN ('sit', 'Sun')
  (21 AND TO_CHAR (SYSDATE, "HH24") BETWEEN 9:30 AND 7:30 PM) IS NOT NULL);
  
  
  I have question on line 21 could you please suggest me
  
  Thank you
  REDA

  WHERE  TO_CHAR (SYSDATE, 'dy') NOT IN ('sat', 'sun')
  and    sysdate >= trunc(sysdate) + (9.5 / 24)
  and    sysdate <= trunc(sysdate) + (19.5 / 24)
  

  This keeps the dates as dates instead of trying to compare strings. (well, except for the part sat Sun)

• How to escape text in the query pattern to avoid the SQL Injection

  We plan to use Oracle Text to search for in a Java web application and use a query template as shown below, but are concerned about SQL Injection attacks. In general, we use a parameter query, but that does not seem possible with these search patterns. Is there advice or recommended to avoid SQL Injection when using query patterns - what characters need to be escaped or cleaned the entry user, etc? Or is there another approach to query patterns which does the same thing, but can use the settings?
  
  Select (1) score, my_id from my_table where CONTAINS (search_dummy,
  ' < query >
  < textquery lang 'grammar' = 'CONTEXT' = > dangerous search terms
  < progress >
  < seq > < rewriting > transform ((JETONS, "${", "}","")) < / rewrite > < / next >
  < seq > < rewriting > transform ((JETONS, "${", "}",";")) < / réécrire > / suiv >))
  < seq > < rewriting > transform ((JETONS, "${", "}", "AND")) < / rewrite > < / seq >
  < seq > < rewriting > transform ((JETONS, "${", "}", "ACCUM")) < / rewrite > < / seq >
  < / progress >
  < / textquery >
  < score datatype = "INTEGER" algorithm = "COUNT" / >
  (< / query > ', 1) > 0
  ORDER BY SCORE (1) DESC;
  
  Thanks in advance for any help or advice!

  You should be able to put the entire query to the CONTAINS clause argument in a variable binding. Prevent SQL injection. It is possible they could do 'contains the injection' and perform research of the else clause contains this as your intention, but unless you are relying on a part of contains the clause to implement security, that shouldn't be a problem.