How to specify if a location of the object with the margin explicitly?

Similar Questions

• How can I change my location on the weather icon?

  How can I change my location on the weather icon?

  Hello

  Open the weather app, and then right click on an empty part of the screen. You can use the symbol change home page to change your default location, or if your computer has the ability to detect your location, select current location to set the location where the computer is .

  Investigate the other icons for other options.

• How to pass an 'unknown location' then the connection to internet? DIAGS say that there is an intellectual property issue.

  I have a problem with tent to connect to internet. I'm using 7 Ultimate and I continue stuck to "identify the location" when connecting to my wireless router. I have no problem with access to the internet directly when I connect my computer to the server, the router is connected to. It seems that it is a problem of communication between my computer and the router.

  I had internet well this router before but now it seems not work. I tried everything suggested previously, including reinstalling drivers and poking my router using the diag.

  I need major help.

  Hi DucoGranger,

  1. don't you make changes on the computer before this problem?

  2. What antivirus application do you use on the computer?

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer. You can see a list of wireless networks that Windows has detected in connect to a network. If Windows doesn't detect a network that you think is in range of your computer, it could be for the following reasons.

  a. your computer's wireless switch is turned off.

  b. your computer is too far from the access point or wireless router.

  c. the access point or wireless router is disabled or is not working properly.

  d. There is interference with other devices.

  e. Windows is not configured to connect to the right type of network.

  f. the router or access point is busy.

  g. the network you're looking for is defined on only broadcasts do not its network name (SSID).

  h. your network administrator is blocking access to certain networks.

  I would suggest trying the following steps and check if it helps.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and check.

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  (This article also applies to Windows 7)

  Method 3:

  Temporarily disable the security software.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Check out the link for more information.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Back to us for any problem related to Windows. We will be happy to help you.

• How to specify a constant value in the external tables?

  Create table cp_portfolio_ext
  (
  rec_type                                                varchar2(1),
  acct_nbr                                                varchar2(23),
  acct_title                                              varchar2(50),
  prod_type_cd                                            varchar2(5),
  acct_desc                                               varchar2(35),
  country_code                                            varchar2(2),
  acct_ref_ccy_cd                                         varchar2(3),
  nom_accr_int_amt                                        number(20,4),
  ineligible_cash                                         number(20,4),
  pldg_amt                                                number(20,4),
  posn_as_of_dt                                           date,
  moody_rating                                            varchar2(5),
  sp_rating                                               varchar2(4),
  mat_dt                                                  date,
  anl_pct_rt                                              number(20,6),
  acct_pp_cd                                              varchar2(10),
  filler                                                  varchar2(229),
  process_status                                                  char(1)
  )
  Organization External
  (
  type                    oracle_loader
  default directory     TEST_DIR
  access parameters
                      (
                           records delimited by newline
                           fields
                                (
                                REC_TYPE                            POSITION(1:1),
                                ACCT_NBR                            POSITION(2:24),
                                ACCT_TITLE                          POSITION(25:74),
                                PROD_TYPE_CD                        POSITION(75:79),
                                ACCT_DESC                           POSITION(80:114),
                                COUNTRY_CODE                        POSITION(115:116),
                                ACCT_REF_CCY_CD                     POSITION(117:119),
                                NOM_ACCR_INT_AMT                    POSITION(120:139),
                                INELIGIBLE_CASH                     POSITION(140:159),
                                PLDG_AMT                            POSITION(160:179),
                                POSN_AS_OF_DT                       POSITION(180:187) DATE "DDMMYYYY" NULLIF POSN_AS_OF_DT ='00000000',
                                MOODY_RATING                        POSITION(188:192),
                                SP_RATING                           POSITION(193:196),
                                MAT_DT                              POSITION(197:204) DATE "DDMMYYYY" NULLIF MAT_DT = '00000000',
                                ANL_PCT_RT                          POSITION(205:215),
                                ACCT_PP_CD                          POSITION(216:225),
                                FILLER                              POSITION(226:454),
                                process_status               
                                )
                      )
  location('ODS_CP_DAILY_EXTRACT.DAT')
  )reject limit unlimited;

  I won't receive flow file process_status, but I would like to have a value by default "n" must be provided. How to get there? I tried to use defaultif, but it does not work it.
  
  I know that you donw with the CONSTANT Keywork using sqlloader. But what in external tables. ??
  
  Published by: 792353 on September 30, 2010 21:21

  I think it should useful to you

  http://Jiri.WordPress.com/2010/03/29/Oracle-external-tables-by-examples-part-4-column_transforms-clause-load-CLOB-BLOB-or-any-constant-using-external-tables/

  Iqbal

• How to delete a recent locations, through the application of my mobile?

  How to remove an element through the application on my mobile?

  Hi klutz126,

  You may want to take a look at this: How can a clear recent files?

  Thank you

  Abhishek

• How to specify an outer join in the query designer

  I quickly built a large query with the query designer, and it works very well, but does not produce 9 disks on 2200 - so I need to change to an outer join.
  
  My problem is that I can't find a way to specify an outer join. I tried to change the query, query builder formed, but it won't let me.
  
  I know that I can capture the query, edit and run it in sql developer and that works fine, but I want to use the Query Builder as it is the fastest way I know to quickly add and remove items - my users don't know exactly what that it to include.
  
  I know it's kind of a trivial question, but I searched the forum, manual, the web and no luck
  
  Thanks for any help you can give
  
  Glenn

  Hi Glenn,.

  When you use the query designer to create the sql statement, you must click on the empty box to the right of the fields in each table to create the join. When you are finished, you should see a line drawn between the two tables. Click on this line, and a small window appears allowing you to select inner outer or right outer joins, left.

  When the report was created, however, you must change the statement. For example, if you use the query designer to join DEPT at EMP based on the DEPTNO field on the two tables, you get:

  select      "DEPT"."DEPTNO" as "DEPTNO",
        "DEPT"."DNAME" as "DNAME",
        "DEPT"."LOC" as "LOC",
        "EMP"."EMPNO" as "EMPNO",
        "EMP"."ENAME" as "ENAME",
        "EMP"."JOB" as "JOB",
        "EMP"."MGR" as "MGR",
        "EMP"."HIREDATE" as "HIREDATE"
   from      "EMP" "EMP",
        "DEPT" "DEPT"
   where   "DEPT"."DEPTNO"="EMP"."DEPTNO"
  

  This is to change:

  select      "DEPT"."DEPTNO" as "DEPTNO",
        "DEPT"."DNAME" as "DNAME",
        "DEPT"."LOC" as "LOC",
        "EMP"."EMPNO" as "EMPNO",
        "EMP"."ENAME" as "ENAME",
        "EMP"."JOB" as "JOB",
        "EMP"."MGR" as "MGR",
        "EMP"."HIREDATE" as "HIREDATE"
   from      "EMP" "EMP"
        LEFT OUTER JOIN "DEPT" "DEPT" ON "DEPT"."DEPTNO"="EMP"."DEPTNO"
  

  Andy

• How to fix a field located at the top of ListField

  Hello

  I have a problem setting the field at the top of ListField when scrolling. I know that it is the responsibility of the FieldManagers, but I could not just make it work.

  

  This is what happens when I scroll down... The orange header has disappeared.

  

  Thank you very much...

  If it is the only area in a screen, maybe you can use setBanner() to get the desired effect.

• How can I change the location of the cache?

  I just installed the new version of Firefox 4.0 beta 5. I was using Firefox 3.6.9 previously.

  In Firefox 4 beta, I can't find the menu item to change the cache location. This feature has been removed, or simply moved to a few other menus?

  Specifically, I need to change the default cache C:\Users\{username}\... location to another drive. This is something usually, people do if they want to reduce fragmentation on their drive system.

  How can I specify a different location for the cache?

  There has never been a Menu item or UI pref in Firefox to move the Cache, it has always been a hidden preference.

  http://KB.mozillazine.org/browser.cache.disk.parent_directory

• Cannot specify a different location for multiple-image backups.

  I want to record several image files on an external drive (which can contain a large amount of data)... It was suggested to specify a different location for the second image... but when I run the process of backup image... first a screen shows my external drive where the image will be stored... but then the screens seem to just continue to do a backup. I don't see any place where I can change the location of the image... It keeps on the re-write on the last saved... image I think that maybe you can change the location of the regular backups... but not for the image file... its on another screen or buried somewhere... the help screen with "attention, images can be replaced" is meaningless for me... I thought he said that it would only replace old images if there is not enuf room on the disc.

  thanx

  Steve

  Hello bichon,

  Thanks for posting on the Microsoft answers Forum.

  Look at the post below which asked questions on images and backup locations.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/338e311d-c0fc-4c56-a4c2-b25a7028188b
  With this option, below is where you can make changes.
  Select the drive to destination or optical disk or network location to store backup files. (this is where I want to change the destination directory name).

  If please reply back and let us know if this helps answer your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Extract the GPS location in the device

  Hi all

  I want to get the GPS location as soon as possible. I use the blackberry 5.0 version. When I use the blackberry Simulator, I am able to read the current GPS position, but when I installed this application on my device, device is unable to get the GPS location. It is showing error and also I am not able to detect the error.

  Neeraj Chauhan

  Try this http://supportforums.blackberry.com/t5/Java-Development/How-to-get-Current-GPS-Location-from-the-Bla...

• How to change the margins and the options for the notebook

  IM typing a paper notebook and when I print... it is not the same aspect. How can I print it how I typed?

  It changes the margins, etc. Help!

  Hello

  Notepad is a simple text editor. Check to WordPad, although it has perhaps not what there is
  offer capabilities on the notebook. Looks like you need a true text editor such as Micorsoft
  Word or others.

  Start - type in the search box-> wordpad find upstairs and double-click it.

  Microsoft Word 2010
  http://Office.Microsoft.com/en-GB/Word/

  Microsoft - Office 2010 Suites - watch Home and Student
  http://Office.Microsoft.com/en-GB/products/?CTT=97

  OpenOffice - free
  http://www.OpenOffice.org/

  I hope this helps.

• How to specify the location of CSS with BlackBerry S/w Version 4.5

  I use version 4.5 software.

  I'm developing some login pages in html and to specify the location of the CSS file. Documentation, I noticed that the HTML tag does not support the rel attributes or the type attribute that you can set to the style sheet and text/css.

  How can we embark/link CSS in the html file?

  Thanks in advance.

  The link tag should work. Maybe the docs are wrong. Best way is to just try and see what happens.

• I am trying to create dynamic landing pages that reflect the locations of my Google ads. How can I create a dynamic text on my landing page to specify the location in the title?

  I am trying to create dynamic landing pages that reflect the locations of my Google ads. How can I create a dynamic text on my landing page to specify the location in the title?

  Thanks a lot for your answer. I've sorted it now.

  Kind regards

  Gill

• How to specify the location of the folder on the user's desktop?

  I write a script that will be stored on a server that is shared and accessible via an action by several users. The script would eventually save pictures in a folder already created on their respective computers. This record would have the same name for everyone, but as each user access path would be different because of their usernames, how to make the backup location in the script just point to this folder on the desktop of users regardless of username?

  Edit: Wait, wouldn't be a matter of making something like this: "~/Desktop/StandardUpload/"?

  That's exactly it.  ~/Desktop/StandardUpload/ or whatever the path.  I use it all the time for my team scripts runs.   There are ways to get data from specific user name, but if you're not interested, it works perfectly

• Adding a table with a button, how to specify the location?

  I have a form of have been a table is duplicated by using a button and the instance script Add.  Is there one had to specify which direction or location of the table is added.  I guess that by default it is created as the original table.  I would like that it is created to the right of the original table.  This option can be changed or scripted somehow?  Thank you

  Hello

  If you repeat the whole table, it is within a subform flowed. The default value is cast from top to bottom. If you change this Western style, objects will be flowing from left to right.

  However, it is because there is the space to the right of the form to receive the new instance.

  Here are some examples:

  https://Acrobat.com/#d=aFfqJJrwjDbVOuT96bD8Ug

  https://Acrobat.com/#d=4QBgZy0pBIV9IoMlKP0lRg

  Good luck

  Niall