How to start in safe mode?

DansDroid talks about starting in safe mode to determine if my problem was internal or third-party manufacturer's software. As I said in my question, I know what will happen, but I have no idea about the 'way' to get there.

How can I start my camera in "SafeMode"? Heck, before he mentioned in his answer, that I didn't know that there was the same option.

Here is a link to guidance on how to do it. I hope this helps.

Tags: Motorola Phones

Similar Questions

I forgot the user password, how to start in safe mode window8?

Dear support

I'm not loging in win 8. I forgot the password of the user, log in. How do I start the mode windows 8 inn safe.

Concerning

Rajeev

Hi Rajeev,

Thank you for choosing Windows 8 and give us the opportunity to help you.

After the description of the question, I understand that you want to start in safe mode since the login screen that you forgot the password.

Could you please let us know if you are using a Microsoft or a local account?

Yes, you can start in safe mode of the signal on the screen.

Click the start on login screen icon, hold down SHIFT and click on restart to go to the settings of Windows startup screen. Then you can select Safe mode to boot into safe mode.

Reference:

Start settings for Windows (including safe mode)

http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

You can also reset your password by visiting the following link.

What to do if you forget your Windows password

http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

If you have other questions related to user accounts, so feel free to get back to us and we will be happy to help you.

I have a mini hp 10 inch. I want to get back to factory conditions or at least start in safe mode. Help, please

I have a mini hp 10 inch. I want to get back to factory conditions or at least start in safe mode. Help, please

Hi, Patty Young. Need you to restore your computer settings or the recovery disk or your computer must have a recovery partition. To start in safe mode, you simply press the F8 key when you see the initial screen and then choose Startup mode in the Advanced menu options. I honestly recommend however, that can you tell me what your question is so that we can try to resolve without the need of recovery.

How to start in safe mode

How to not show the windows in safe mode (pop-up), start in safe mode

Firefox Safe mode
```
             Safe Mode is a special mode of Firefox that can be used to troubleshoot issues.
             Your add-ons and custom settings will be temporarily disabled. You can also Reset Firefox if you want to start fresh.
                                                                         Start in Safe Mode           Reset Firefox
```
This window I want to cancel whenever I want to use the command line
```
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode  How to do it? Thanks
```
There is a pref extensions.enabledAddons you can find on the topic: config page.

One possibility would be to have two versions of a user.js file to initialize this pref with extensions installed and enabled and copy one you need by launching Firefox via a cmd file.
If you are that tight on memory, then you only need to run a version at the time.
- http://KB.mozillazine.org/user.js_file
It is Pref plugin.state to disable plugins in case you want to do the same, but plugins are used when you visit pages that use them and affecting all the plugins for "Ask to activate" should suffice.

Black screen, does not start in safe mode - how do I restart my mac

Hello, I have a MacbookPro, that all of a sudden will not start. I believe that the problem - from what I've read-, is that memory is simply too fulll. I tried to start in Safe Mode, but of course it doen't work. The screen displays a small bar as it loads, but after a while goes back to the same blank screen and nothing happens. I tried waiting half an hour, but nothing changes. I have not tried to launch utility disk in Recovey Mode because I'm afraid of what will happen to my files. Unfortunately, I unwisely postponed to back up files and now I'm afraid to do anything that my fry them all without me even realizing it. Can you offer any solution that is as safe as possible? I don't have a cable Thunderbolt.

Thank you

If you think that the MBP storage is full and not allowing you to start, try the target disk mode:

https://support.Apple.com/en-us/HT201462

Ciao.

Windows xp does not start in safe mode how to

Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

When you choose to start safe mode, which is the last thing you see on the screen?

When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

Disable the automatic restart in the event of system failure

Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

Here's a BSOD example showing information you provide:

http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

Send for the nose and the Red arrows (3 to 4 lines total).

Send all * line STOP message since there are clues in the 4 parameters.

If it looks like there is some kind of name listed in the STOP message file, send this line also.

Ignore the boring text unless it seems important to you. We know what a BSOD looks like, we need to know what your BSOD looks like.

Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

How to do in safe mode? What F key to use when starting to get in safe mode?

need to know what F key makes me when starting in safe mode?

Start typing F8 when you turn on.

The options that are available to you, should be similar to the following:
-Safe Mode
-Safe Mode with networking
-Safe mode with command prompt
-Enable Boot logging
-Activate the video resolution (640 x 480)
-Last good known Configuration
-Directory Services Restore Mode
-Debug mode
-Disable automatic restart in the event of system failure
-Disable driver Signature enforcement
-Start Windows normally

Satelite A660 freezes at startup every time, but start in safe mode.

The other day I was using my laptop normally when it froze. Nothing would work, so I stopped and have not been able to market normally since. It will start in safe mode but not in safe mode with network. If I try to boot normally it freezes right at the same time at the start of each time.

I tried:
-Select "repair your computer" when starting the
-Restoration of the BIOS to the default settings
-Disable start programs in safe mode
-Restore the system to a previous date
-Back to the last successful startup

None of them work. It just freezes.

I can't use the good conditions, not too computer savvy... I even tried to return the computer to factory settings, as recommended on the site of Toshiba, but when you press 0 a screen pops up that doesn't seem to have anything to do with the system restore?

I am at a loss. Any help would be appreciated.

Hello

Everything you tried is right. It is not easy to say why you have this problem of gel, but I think that in this situation best solution is the installation of clean operating system (factory settings).
In s user guides document explains how to do this. I put t know why don't you use 0 to start.
Start with F8 laptop and use the option to fix my computer.

How it works you can also read on follow Toshiba document-http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

Please test and comment pos.

Pavilion mini 300-010 in: no display after starting in safe mode

Recently (2 weeks) bought the Pavilion Mini Office 300-010 and was well before decide me Flex my curiosity.

the office is connected to my monitor VGA Samsung using the HDMI-VGA connector since the release of funds has no VGA or DVI - I usage options.

the part where my curiosity killed the cat, was when I decided to start the winodws 8.1 in safe mode and see what happens.

pressing F8 did not help that the load of the OS had no delay (or maybe it's the UEFI BIOS) and so I decided to put safe mode with "a minimum without network option 'using 'msconfig'." Performed a reboot assuming I see safemode and all I got is a black screen. Noticing that the driver for the conversion of the display cannot be loaded in safe mode and now I'm stuck because I do not have a p LCD monitor that plugs directly into.

I checked the monitor VGA just in case, and it seems to work very well with my laptop. . Done reboot "N"-number of times and the result is the same. ".

is there a way to get out of safe mode without actually doing a HDMI compatible monitor by just using the keyboard?

Hello @LogicMantra,

Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

I read your post on how your office is not able to display after starting in safe mode, and I'd be happy to help you in this case!

To fix this, I recommend you to borrow an HDMI compatible monitor and update the drivers for your system this way. If this does not work, please follow this document on the computer starts up but screen remains blank (Windows 8).

Please re-post with the results of your troubleshooting, and I look forward to your response!

Concerning

Computer hangs, reboot, can only start in safe mode

Original title:-i can only start in safe mode

Ive tried to use several restore points but when I try to reboot the computer freezes and I have to start in safe mode

Safe mode is a mode where Windows works only the bare minimum programs and processes necessary to the performance of your system. When you start in Normal mode, many more processes and applications running. At least one of these programs or process causes your computer to crash. If your task is to identify this program/process and, at least temporarily, to prevent it from running at startup. Microsoft has a tool that you can use to selectively disable or or the process that normally run at startup called "msconfig". It can be a long and exhausting iterative process of turning things off and restart to see if it you fixed program, but that's what you do:

"How to solve configuration errors by using the System Configuration utility in Windows XP"

<>http://support.Microsoft.com/kb/310560/en-us >

First, disable all items "start-up". If it does not, set it to 'Services '. If this does not work, then reactivate some of them and try again until you zero - in on the culprit.

HTH,

JW

I have windows xp after the installation of service pack 3 I can only start in safe mode

I have windows XP after the installation of service pack 3 I can only start in safe mode?

Hello

· You get the error message?

· What happens when you try to start in normal mode?

Method 1

Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

(a) minimal

(b) network

For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems

RESOLUTION

(a) click Start, run and type MSCONFIG

(b) click the Boot.ini tab

(d) in section downstairs, Startup Options uncheck / hisFEBOOT

(e) click OK

(f) restart Windows

The entry/SafeBoot are removed from the Boot.ini file.

Method 2:

If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

How to restore Windows XP to a previous state

Step 2:

I suggest you follow the troubleshooting steps form the article and check if it helps.

How to troubleshoot an installation fails on Windows XP Service Pack 3

http://support.Microsoft.com/kb/950718

Note: System requirements to install Windows XP SP3

Reference: Learn how to install Windows XP Service Pack 3 (SP3)

Hope the helps of information.

Windows does not start. Cycles to start in safe mode page, will then try to restart on its own

Windows XP tries to start to the top of butends to the page of type BACK questions on starting in safe mode, safe mode with command prompt, or start with the last successful boot parameters. We cannot arrows upward or downward scrolling. Attempts of the computer to boot itself every 30 seconds repeat the same cycle that ends again at the option of safe mode page. I left the computer on during the night and he did this recycling all the night evry 30 seconds never really start Windows. I shut down the computer and then reboot tapping F8 all the time or something to take advantage of some control and reset? Thank you for your help. Dave

Hi Dave,.

· You did changes to the computer before the show?

Try the following.

Method 1: Shut down the computer, remove non-essential external devices and restart the computer. Check to see if it boots fine.

Method 2:

Step 1: Try to start in last good known Configuration and see if you can start very well.

How to start your computer by using last good known Windows XP Configuration

Step 2: Start the computer in safe mode and check the number. Report of the results.

usually open after backup, Windows registry can not be upgraded to int ex 8. need to know how to go in safe mode, remove int ex 8 and redownload, perhaps?

used Windows open, after backup to a date earlier, says registry cannot upgrade to int ex 8, need to know how to go in safe mode and try redownloading my java script and maybe uninstall redownload and int ex.8, I have windows xp professional sp 3

used Windows open, after backup to a date earlier, says registry cannot upgrade to int ex 8, need to know how to go in safe mode and try redownloading my java script and maybe uninstall redownload and int ex.8, I have windows xp professional sp 3

Hey mary, mary

Here is the vista forums

Choose Safe mode with network to use in the menu you will have your internet connection to use for download unless you connect through wireless

Using the F8 method:
1. Restart your computer.
2. When the machine starts first, yet once it will list usually some equipment that is installed on your machine, amount of memory, hard drives installed etc. At this point you should tap theF8 key repeatedly until you are presented with a menu of Advanced Options in Windows XP .
3. Select the Mode safe mode with the arrow keys.
4. Then press enter on your keyboard to start safe mode.
5. Make all the necessary tasks and when finished restart to start in normal mode.
and here is a link to the xp repair forum

http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads?filter=AllTypes

Walter, the time zone traveller

Problems to start in safe mode.

I have the infamous ainslot.a virus, and I read that I should start in safe mode and use an analysis online to get rid of him. Problem is when I start in safe mode, my screen says its under 60hrz and does not display anything. suggestions?

Hello

You should check with the manufacturer of your system (manufacturer of motherboard for customized systems) to this topic
message mode without failure.

If you need to save data to a drive non-Boot you can put the drive in another computer
or in an external USB enclosure - either allows you to copy the data to a removable media. NOTE
There are two dangers that these 1. The system in which you put the drive could be infected
and 2. malicious software could be transferred to the new facility. Another method would be to use
the copy and/or backup methods integrated into these removable media such as CD, DVD, copy or
other USB keys.

So it would be best to do the above to remove malware and who could possibly allow the
computer to start so it can be repaired.

Configuration/settings (BIOS/CMOS) often F2 as you start to look at the screen - the boot
for CD/DVD first and start with these to run audits of malware and the removals. Be
Be sure to set the order started back when finished.

Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
Integrable Hirem is another choice - more can be found using Google.

Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12

CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

System Rescue CD
http://SysRescCd.org/Main_Page

Scan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

===============================================================================

If you can start mode without failure or Windows.

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

-----------------------------------

Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htm

Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx

----------------------------------

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps.

I hope this helps.

my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

Hello

as you cannot start in safe mode, try this

the link below is how to download and get a vista disk startup repair, which you can start from the

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

http://www.bleepingcomputer.com/tutorials/tutorial148.html

to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

Change boot order it do dvd drive 1st in the boot order

http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

or repost in the correct windows update forum

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

How to start in safe mode?

Similar Questions

Maybe you are looking for