How to start other backup sets using Vista Hm Prem backup and restore correct files list

Similar Questions

• Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Possibly a hard disk failure.

  http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx

  Try to run diagnostics from the manufacturer if you can.

• I used the backup and restore of the backup C on pc. Then tried to open saved files with IE and started acting weird.

  zip files

  I used the backup and restore of the backup C on pc.  Then tried to open the files saved with IE.  IE went into free fall.  ???

  I have no idea what opened the backup files when you have double-clicked, or if you will not quote you took after doing this...  However, the official way to 'Browse' the content of the backup...

  You can view the contents of your backup by opening the wizard to restore files.

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. Do one of the following:

     • To view your files, click Restore my files.

     • To display files all the, click on restore files for all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Do one of the following:

     • To browse the contents of the backup, click Browse for files or click Browse for folders.

       When you browse folders, you will not be able to see the files in a folder. To view individual files, use her browse for files option.

     • To search the contents of the backup, click search, type all or part of a file name, and then click search.

  If you back up to the top PC (VHD) integer then you mifght consider this trick:
  http://www.Petri.co.il/mounting-Vista-backups-using-Windows-complete-PC-Backup.htm

  According to the edition of Windows Vista that you have (and how useful, you will find the possibility to look at old versions of a given file and possibly restore), this could be useful to you:
  http://www.ShadowExplorer.com/
  (not a replacement of relief.)

  With regard to the rate of success vs. failure rate of backup - it is difficult to measure.  Indeed most of the people backs up incorrectly.  It's really * not * enough to set a backup and forget about it.  If you test ever that your backups work/glance to see if you are backing up the good thing - it's just not wise.  Although most people expect that it is essential that the backups were working properly (not a test, a real emergency) to be discovered.  Most individuals who report failures, unfortunately, fall into this category "when my aircraft crashed and I went to my backups - it turns out _ backup _ does not and never told me...» ».

  A question... If you manually create a ZIP file (not a backup) - can you still Explorer in it as a folder?

  To test... Create a folder on your desktop.  Copy some files into it - of different types.  I say COPY and not MOVE on the goal here - because you can just blow this folder and all that results from this folder later if it was all fair copies of things.

  Make a right click on this folder and choose "send to" and "compress (ZIP) file and give a name to the new 'folder '.  (It's really a file.)  On your desktop, you should have the original folder you created and copied some stuff in, and a new "folder" with the name you just gave.  If you open the 'new' folder - you should see the name of the folder that is still on the desktop and go to this folder, you should see the files.  You literally use Windows Vista to the 'discovery' inside a ZIP file as if it were a folder.

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer

• Vista Home Basic. My restore backup and restore is "RunOnce", how do I change to normal?

  I downloaded a program from the internet and immediately unitnstalled, because it was not what I expected. Now my "backup and restore is on" RunOnce.  How to change backup and restore back to normal?

  Hello

  1. What is the name of the program you downloaded / installed?

  I suggest that you perform a System Restore to the point your backup and restoration were normal.

• How to make a backup of the system files?

  I want to just back up the filesystem in the case where.

  Hello

  You can save your own personal files (documents, photos, etc.) or do a complete PC backup that contains the system files.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  ___________________________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery discs that are system files in order to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• Backup and restore problem in Vista HP-64

  Try to restore from backup in Vista from USB drive external... get the backup the value indicated, but says the location is not available... yet Windows Explorer displays the player is here and shows the disk backup sets... How to restore?

  Hello

  The program used to back up the data on the external hard drive?

  Did you restore the files before sucessfully?

  First of all, make sure that you enter the location of backup to restore the files. Chances are that you might have entered the wrong drive whereby you are gettting this error meesage. If you have used backup and restore utility under Windows, go through the links below that will help you to restore files.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  How to manually restore the files backed up using Windows backup
  http://support.Microsoft.com/default.aspx/KB/970914

  Let us know if this helps

  Concerning
  Anthony.

• Problems of restoring a backup of Windows Vista backup and restore program

  I recently had to completely reinstall Windows XP, then the Vista upgrade, to fix a problem with updates of Microsoft.NET and ATI graphic driver.  In may, I made a full backup of my laptop using Vista resident backup and restore program, using an external hard drive to store the backup.  When I learned that I had to reinstall the operating system, I did another backup in August (but not complete) using the same program.  Just after this backup in August, I did the reinstallation of operating systems, with the help of the phone of Dell.  My original problems are solved.

  When I was ready to use the restore the Vista program, I had to choose among the two sets of data (May to August) about which I wanted to restore on my laptop.  I chose August, thinking that it would be later.  However, in Outlook, all my saved e-mail messages are gone, I have no e-mail address book and any current calendar entries.  These are the only things I noticed up to this and are not, but I have not checked all the files... they are large enough.

  The folder on my laptop which normally contains my Outlook data files shows only a file Archive and the very small current .pst data file for 7 messages in my Inbox.

  It seems that the backup of August was important to may backup and maybe most of my Outlook data are in the may backup.  How to get data from two backups in my laptop?  When the backup is a folder with the same name, you have the opportunity to write about it, not copy, or copy it and have 2 folders.

  I tried to copy all the data from the external hard drive in the folder of Outlook data on my laptop.  It will eventually be several files, and Outlook reads only the more recent, so I don't always get access to the data that I hope is here!

  Can someone please?  My life is in my calendar, I lost years of e-mail addresses, and much saved messages that contain important data.  Thank you!

  Hello

  You must import the Outlook.pst files from backups in your current Outlook. Copy your gift
  Outlook.pst file somewhere else as a backup incase you made a mistake. If necessary you can IMPORT
  New in Outlook. If you import all your old Outlook.pst files into your new perspective you should have the
  total sum of all. Import e-mail messages, and then click contacts.

  How to migrate to Outlook 2007 and Windows Vista
  http://www.vista4beginners.com/migrate-to-Outlook-2007-and-Windows-Vista

  More help here Discussions and focus groups:

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Microsoft.public.office.setup discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?GUID=1A61081E-1F66-5F7F-B5BA-04767E55A63B

  -----------------------------------------------
  Some tips on the Outlook backup, you can use. Also save the Outlook.PST file occasionally by copying
  He's somewhere else.

  Back up Outlook data with the tool backup Microsoft Outlook personal folders
  http://Office.Microsoft.com/en-us/help/HA100758021033.aspx

  With the help of the tool backup Microsoft Outlook personal folders
  http://Office.Microsoft.com/en-us/Outlook/HA010875321033.aspx

  Outlook 2007/2003/2002-in Add-in: Personal Folders Backup
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8B081F3A-B7D0-4B16-B8AF-5A6322F4FD01&displaylang=en
  Rob - bicycle - Mark Twain said it is good.

• Upgrade Vista Home Premium to Ultimate - Windows complete PC Backup and Restore

  Dear Madam, dear Sir

  Upgraded my laptop HP DV7 Vista Home Premium to Ultimate, mainly to use Windows complete PC Backup and Restore.

  The restore time and unfortunately no option in the boot menu at startup to restore system from images. No menu advanced etc. I guess starting always remains at the level of the premium and does not provide "Windows complete PC Backup and Restore" restore options.

  Grants menu of system restore points, with only the last good restore point and no option to select point of previous restoration or system image to restore from.

  Mmmm nice ideas...

  Thanks in advance

  Good day

  Kent

  Hello

  Complete PC Backup is designed for the reinstallation of the operating system that you have backed up.

  You access it to start from a Vista DVD.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  To restore a full backup of the computer, you must proceed within the Windows recovery environment. To access the Windows recovery environment, you will need to insert your Vista DVD in the DVD drive on your computer and turn on your computer.

  See you soon.

• Windows complete PC Backup and Restore for Vista Home Premium

  I finally new PC my son all set up with Vista 64-bit Home Premium and installation is sublime.

  But when I looked for a few floppy bootable installation complete I think I bought the wrong version of the program.

  "Windows complete PC Backup and Restore" only comes with the Ultimate and Business edition.

  Is it possible to add this functionality to my version of windows without switching completely to the Ultimate version?

  No, you will need a third party app. Many people prefer Acronis True Image, but I lean toward a slightly more expensive, but a complete solution, with this app.

  ShadowProtect Desktop Edition 3.3

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Reconfigure Vista Home Center backup and restore

  Configuration of the backup and Restore Center on Vista Home user to backup automatically once per month on the recovery disk (D :). How can I change this? The "Edit settings" link, I cannot change the destination drive.

  Thank you

  Hello Troy Wooten,

  Click the number of the KB article and see if this will help you to change the location of the backup settings.
  KB Article ID: 939615 -you can not change the settings for a file backup operation or use the Windows Task Scheduler to change the schedule of defragmentation in Windows Vista

  You can use the automatic FIXIT or there is instruction manual in the article.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My programs do not work after the use of backup and restore.

  I had to restore my laptop to original settings and now my program files do not work or even appear in the start menu. They show on the C drive.

  I used all my programs and files backup and restore for the restoration.

  How can this be repaired?

  Reinstall the programs.

  See you soon. Mick Murphy - Microsoft partner

• I would like to know if Windows Backup and Restore will copy a new set of files and adding to what is there in the previous backup folder

  On my old computer (XP), I used app fast backup protection to back up my files to an external drive, Iomega hosted Media Network Hard (2 TB).  I have a new Dell PC with Windows 7 (64 bit) OS.  With the help of a cable I copied all the files from my XP to Windows 7 computer.  All the files on the external hard drive, copied to a "network".  I am able to view all the folders of the Iomega file, but I can't back up my files to protect fast has not been improved to work w/Win 7.  Quick protect is divided into 6 different discs (photo-U, V-ActiveFolders, W-Music, X-backups, Public-Y, Z-movies), Iomega recommends using backup Windows and restore.  "Before you start this process, I would like to know if Windows Backup and Restore will copy a new set of files and adding to what is there in the folder backup previous Player X or if it will start a"new"backup" folder on drive X.

  Original title: BACKUP AND RESTORE

  New.

  Probably in a completely different format than you are accustomed to and accessible in a different way.

  Although I suppose you could create separate jobs for each of the existing partitions, if you wish.  But I would like to backup these partitions to something else before you start. Heh

• How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive

  How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive. To give you more information, I have photos stored on a network drive to the following address: Wirelessspace\LaCie\MyPhotoGallery\Family. This folder is a location of library under the images. Because this folder is on a network drive backup backup not file Wizard.

  In addition, the following file locations is not found because they no longer exist. So why the backup wizard continues to look for and how to remove the backup set? I guess the error code following each line means simply that records cannot be found. Is this correct?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Searches\Google file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))

  Hello

  I suggest you to follow the steps in the article below and check if it helps.

  Error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281

  Hope this information is useful.

• Vista backup and restore

  I made a backup of my personal files of Vista on a Flash drive with the Restore Wizard and back;  Then I re-installed Windows Vista. When I tried to restore my backup, I get the message that there is no backup file on the computer.

  Hello

  This is the reason for no backup file on the computer, you need to use the advanced option, etc.

  http://www.Vistax64.com/tutorials/100253-restore-backup-files.html

  «3 click the restore files .» (See screenshot below)
  NOTE: To restore a backup that is not shown here, click Advanced Restore Options instead, click Advanced Restore Options (Restore files from a backup made on a different computer). »

  __________________________________________________

  I never tried to use Vista backup and Restore Wizard to back up files to a Flash drive for this reason:

  http://Windows.Microsoft.com/en-us/Windows/back-up-files#1TC=Windows-Vista

  Notes

  • No backup files on the same hard disk that Windows is installed. For example, to make the back not files on a recovery partition.

  • Always store media used for backups (external hard disks, DVDs, or CDs) in a place course