Similar Questions

• HBO GO does not work on my: Lenovo tab 2 LTE a10-70

  Hello everyone.

  I bought this tablet: lenovo tab 2 LTE a10-70 yesterday. I've completely updated to the latest version. I installed a few games... and today I wanted to try the HBO GO on it.

  When I installed the app, everything goes well. I logged, chose the tv show I wanted to watch and the video starts BUT then video GARDNER after 2 seconds of reading... I tried to watch different videos... and he did the same. My father has the same tablet, so I tried on her... and he did the same. Allways video stops on the 1. or 2. second and is buffering is no longer. Can someone help me please? as I plug the Tablet for HBO GO as well... to look at while I'm traveling but now its does not work.

  I have already tried:

  force stop, empty the cache,

  reboot device

  Reinstall the application.

  None of these 3 have worked.

  Can you guys please help me because I really desperate?

  Thanks in advance.

  Œuvres last upodate HBO GO app.

• iCloud music library does not work on my new iPhone

  Hello

  iCloud music library has worked between my Mac, iPhone 6 and iPad Pro. However, it does not work on my new iPhone 7.

  When I try turn it off and on again, I do not get the merge or replace guest library that every site seems to say that I see. When I turn it on and open the music, I don't see any of the artists or songs or playlists that I added on my other devices. Occasionally (maybe 5 times), several full minutes after activating the iCloud music library, I get the error "iCloud music library can be activated. I tried using different wifi, using LTE networks and to connect it to my Mac. I tried to reboot the device when enabling/disabling iCloud music library. I also tried to use file > library > update to iCloud music library iTunes. I've been at this for about 4 hours now and am about to start rider on my hair. Any help is appreciated.

  Thank you.

  You back up iPhone via iTunes or iCloud 7?

• Mobile data does not not after upgrade

  I did the update of the week last on my husband and my iPad and restart both devices didn't have any service for our sim cards, devices will only work on wifi. I tried to backup, restore and then I data mobile service. Certainly it does not work because of the update. How can I fix without losing everything on my DIIAP?

  Hello there, effective.

  It sounds like you cannot connect to cellular data on your iOS devices after the last update. The following Knowledge Base article offers up some great not for troubleshooting:

  If you cannot connect to a cellular network or cellular data

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular^*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  5. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  6. If you have another device, see if you can connect your business with her network to this place.
  7. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.
  8. Update your iPhone or iPad to the latest version of iOS.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you can connect to the 3G but not 4G LTE

  Make sure that your device is compatible with LTE. Go to settings > cell phones > turn on LTE. Identify your iPhone and compare his number LTE carriers support list for your country or your model location. Or identify your iPad and compare its model number with list of supported carriers LTE for the location of your country. Options of LTE can vary according to your corporate network.

  In some countries, you could see Mobile instead of cell phones. For example, you might see settings > Mobile or settings > Mobile > Mobile data network rather than the settings > cellular or settings > cell phones > cellular data network.

  In addition, if you fear to lose the content, make sure that you check the information here on the backup options:

  How to back up your device using iCloud or iTunes

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• I recently updated my iPhone to iOS 9.3 6s and now my data and wifi are in place. Now I can't open the apps and send messages with data and barely on the wifi. I've tried everything, and it still does not work.

  I updated my iPhone to iOS 9.3 6s today and now my data and wifi are in place. Whenever I try to open an app or send text messages with data it does not at all. And with wifi, it just works. I tried just like turn roaming off and off and other lte but nothing seems to work at all. Can someone please?

  I have this same problem too, it really gets me upset

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• Hi, I bought 6 Iphon from another country and it does not work in the USA help please!

  Hi recently I went to South Korea and I bought the iphone 6 in there and used it

  And I'm back to try from the USA at the same use iphone 6, but it does not work with my verizon sim card

  So I went to the verzion store to find the problem but they could also solved the problem

  Can you help me please?

  N ° do not use this phone on Verizon. Verizon is a CDMA carrier. It can be possible to operate on the Verizon LTE network, but they don't will not activate it on their CDMA network. Only unlocked iPhones they will activate on their network (excluding those sold specifically for Verizon) are the 6s and 6 s more.

• BlackBerry Smartphones BlackBerry support insists that STV100-1 does not support the China Mobile HK?

  Then I go to Hong Kong right now with my Priv, using a prepaid of China Mobile Hong Kong that I've used with my classic. Noticed that I can not make calls with it so I called BlackBerry charge to open a support case.

  I noticed two things:

  -I am able to receive a 4G signal

  -Whenever I make a call, network goes to no Service. I also can't find any network if the phone is set on 2G or 3G only

  -I can not receive calls, it keeps saying number not reachable, as if the phone was turned off

  -In the phone app, my number is listed as unknown.

  After a lot of troubleshooting with the support rep, she argued that my private does not support the China Mobile HK, which doesn't seem wise. I'm temporarily using the card with a backup of Telus/Koodo G4, while my private does not work, and it works fine.

  Priv STV100-1 supports:

  • FD - LTE 1, 2, 3, 4, 5, 7, 12, 17, 20, 29, 30
  • HSPA + 1, 2, 4, 5/6, 8

  H812 G4 Telus LG support:

  • FD - LTE 2, 4, 5, 7, 12, 17
  • HSPA + 1, 2, 4, 5/6

  China Mobile uses UMTS and LTE 3/7 1/8. This is why don't the Priv actually be MORE supported? I ' n suspect a hardware issue yet I can't seem to convince management of the case.

  Okay, BlackBerry RMAing my device now, so I guess that's it.

• EEM Applet does not fire TCL script after expiration of the countdown

  We use currently EEM Applet below than securities has BGP route and if this path fails, it starts a countdown of 45 min, once the countdown expires, the router reloads. If the BGP route restores it will remove the countdown applet.

  I'm trying to change this applet to reproduce the same type of behavior, but instead to recharge after 45 minutes, I am changing the cell parameters via Script TCL or other means besides.

  Is this possible? Can someone direct me how to proceed?

  Cisco 1941 Version 15.4 (3) M2

  event handler applet track down
  Description "this applet will add the countdown applet when BGP 10.66.66.66 road goes down."
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 2.0 cli command "config t.
  Action 3.0 cli command "event manager applet countdown."
  action 3.1 cli command "description This cmdlet is the countdown and will cause the router reload after 2700 seconds if BGP route is always down.
  Action 3.2 cli command "event timer countdown 2700".
  action 3.3 cli command "reload action 1.0.
  Action 4.0 cli command "end".
  command action 4.1 cli 'enable '.
  Action 4.2 cli command "wr mem".
  Event Manager applet track-up
  Description "this cmdlet will delete the countdown applet when restores BGP route to 10.66.66.66.
  Event State track 10 upwards
  command action 1.0 cli 'enable '.
  Action 2.0 cli command "config t.
  action 3.0 cli command "no event manager applet countdown."
  Action 4.0 cli command "end".
  !

  This is the applet changed, with that I have had the most success. The issue I'm running into is, sound without waiting 60 seconds (for testing I reduced to 1 minute) to run the tcl script. From my limited understanding, I discovered that, after the countdown event - the applet requires an action immediately after but does not accept a command like 'tclsh Cell.tcl' cli as 'action '. »

  event handler applet track down
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 1.1, «config t» cli command
  Action 1.3 cli command "event manager applet countdown."
  action 1.4 cli command 'event timer countdown 30 '.
  action 1.5 cli command "action 1.0 wait 30.
  Action 1.6 cli command "end".
  Action 1.7 cli command "tclsh Cell.tcl.
  Event Manager applet track-up
  Event State track 10 upwards
  command action 1.0 cli 'enable '.
  Action 2.0 cli command "config t.
  action 3.0 cli command "no event manager applet countdown."
  Action 4.0 cli command "end".

  It is the TCL script that I use to run cellular changes.

  tclsh
  puts [open "flash: Cell.tcl' w +] {}
  ios_config "interface 1/0/0" "shut".
  ios_config "0/1/0 lte tech gsm cell".
  ios_config "interface 1/0/0" 'no shut '.
  After 10000
  ios_config "interface 1/0/0" "shut".
  ios_config exec 'cell auto 0/1/0 lte tech '.
  ios_config "interface 1/0/0" 'no shut '.
  }
  tclquit

  Thank you
  Robert

  These cmdlets will not accomplish what you want.  I also recommend never call EEM tclsh.  You don't need to do.  Use EEM MCI in native mode, or in your case, just use pure applets.  Take a look at https://supportforums.cisco.com/document/12723951/how-introduce-large-de... .  If you follow this example and put your config CLI commands in the countdown applet, you will be able to achieve what you want.

• Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  Try to install InDesign CS5.5 on a new laptop without a CD ROM installation wants a drive only; does not recognize a flash drive. What should I do?

  I didn't come across this link, so I tried to copy the desktop flash player and installed it from there. Thank you, in any case.

  Sent from my Verizon Wireless 4 G LTE smartphone

• single network host does not

  Hello

  the only network of my host does not work for a few days. Before that, he worked.
  I upgraded to 4.0.1 4.0.2 but I don't know if this is the reason.
  Striking is the IP address of the host. That was before the 192.168.106.1. Now, it's in the link-local area.
  My data:
  VMware Player build 4.0.2
  Host: Windows 7 Professional
  Comments: Ubuntu 10.04 LTE, VMware Tools up to date, static ip 192.168.106.12

  ipconfig/all

  Windows IP configuration

  Ethernet VMware Network adapter adapt VMnet1:

  Suffix-Verbindungsspezifisches DNS:

  ... Description: VMware Virtual Ethernet adapt for VMnet1

  Physical address: 00-50-56-C0-00-01

  DHCP aktiviert...: Nein

  Autokonfiguration aktiviert...: Ja

  Verbindungslokale IPv6-address. : fe80::cdae:b6fb:1b1a:3ceb % 23 (Bevorzugt)

  IPv4-address (Auto. (Configuration): 169.254.60.235 (Bevorzugt)

  Subpattern...: 255.255.0.0

  Standardgateway.... :

  DHCPv6-IOOKING...: 352342102

  DHCPv6-Client-DUID...: 00-01-00-01-15-A7-9D-90-F0-DE-F1-70-70-68

  DNS server: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS & #129; BER TCP/IP...: Aktiviert

  I agree with the other poster. Please check if the 'VMware VMnet DHCP Service' (vmnetdhcp.exe) is running. You can also try to do a "Restore Defaults" to see if that fixes the problem.

  André

• Photoshop CS4 Windows 7 arrange Documents icon does not

  I have Photoshop CS4 on a Windows 7 computer, and documents to reorganize that icon does not work. I reinstalled the software but it didin't work.  Any ideas of what might be wrong?

  Banjojoe

  Hallelujah! It worked!  Thanks a bunch!

  Sent from my Verizon Wireless 4 G LTE DROID

• iPhone 7 more buttons outside does not

  I've had my iPhone 7 + for about 2 weeks now. Every once in awhile all buttons outside to stop, volume up/down, power, home. The home button will still record and push and give the sensation of taptic and touchID works. The phone itself still works and I can answer texts and which do not use notifications.

  The couple spent time he did, he came upon her in about 4-5 minutes, however it was about half an hour and still nothing. I want to restart my phone, but the switch does not work.

  Has anyone seen this issue or know how to fix?

  Thanks in advance.

  I just experienced the same problem on my iPhone 7, I think it's a bug in iOS, but I am using iOS 10.0.2. Power + button low Volume allowed me to turn it off then turn it back on... Apple please fix this bug!

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.