How to start the remote console

Similar Questions

• PC will not boot or start the recovery console

  Windows XP 2004

  AMD Athlon XP 3000 +.

  AVG 8.0

  My friend tried to jailbreak his ipod. Now his PC will not boot the OS. It will go to the screen with the options to choose each time you start upward into the safe, normally last good known etc.. Choose one of these options results when control of the PC for the IDE drives and soon after an accident to return to the screen that says "a problem has been detected and Windows has shut down to prevent damage to your computer." I try to start the recovery console, but then I get a blue screen that gives the same spiel, then this Stop error message:

  STOP: 0X0000007B (0XF79BA524, 0XC0000034, 0X00000000, 0X00000000).

  In addition, I changed the boot order in BIOS and tried to use the recovery through an ISO boot console. He ends up crashing this first screen appeared. Even if the BONE is fatal, these guys really want to the GET data out of their hard drive.

  Thank you.

  http://support.Microsoft.com/kb/316401

  http://support.Microsoft.com/kb/324103

  Or, if you just want to back up your data and do a clean install:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to display the java console on Windows 7 using Sun Java plug-in

  Hi all
  
  I have an Oracle 11 g installation Rel2 developer on my windows machine.
  
  For the purposes of debugging, I would like to know / Access how to display the java console.
  
  Thanks in advance...!

  You turn on the Java Console in the applet of the control panel Java (Start Menu-> Control Panel-> Java-> tab advanced-> Java Console).

  Craig...

• Generate the URL of the remote console

  Hello

  "Just out of curiosity, let's say I use the Web Access tool to allow a user access to VM via" "Generate remote console URL.  After a week let´s say I want to deny access to this URL.  How you go about it? My understanding is that if I click again on the link "Generate the URL of the remote console" it would generate a new URL and therefore the user would not be able to access this virtual machine, and more but please correct me if I'm wrong.

  Thanking you in advance,

  Saludos,

  Jose Maria Gonzalez,

  -

  ---

  http://www.JmGVirtualConsulting.com

  http://www.josemariagonzalez.es

  VMware vExpert 2009

  Co-autor del Libro update1 VMware Site Recovery Manager 1.0

  -

  ---

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

  ! http://feedproxy.Google.com/ElBlogDeVirtualizacionEnEspanol.2.gif!

  The web URL is a simple link.  You manage access through the VI Client and VM Templates, to show all of your VM.  Restrict access.  They may have the URL, but they cannot access the virtual machine if they do not have a user or group to this virtual machine.

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• I can't understand how to start the calendar after the migration.

  I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.

  I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor.

• How to recharge the remote control for Apple TV 4

  How to recharge the remote control for Apple TV 4

  Recharge your Siri or Apple TV Remote - Support Apple Remote

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

  Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  Thanks for the link.

  It will be fine if some owner of Satellite X 200 can confirm.

• How to start the assessment without a device

  Hello

  I downloaded the evaluation version.

  How to start the assessment without a device?

  Thank you

  DV63

  Hi DV63,

  Welcome to the Forums EITHER!

  If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.

• Keyboard will not work to start the Recovery Console repair function

  I would like to use the repair feature in Windows XP Professional Recovery Console when starting Onboard or USB CD-ROM drive.  My keyboard works very well to enable F12 and select boot device.  Windows Setup starts and then loads bunch of pilots - looking... but then my keyboard won't work for select 'R' to start the Recovery Console repair.  All this started because I uninstalled a Lexmark printer and it seems that the driver Lexmark LXBTtime.dll lack now but still wants Windows to start.   So now Config\System will not load.  I saw some threads in this forum recommend that my wireless keyboard does not work - so I borrowed a USB wired keyboard - but still the same problem.  Cannot select 'R' - the keyboard light turns off and of course not recognised by Windows Setup.  Any ideas or suggestions?  In addition to the purchase of a MAC (it was my suggestion of neighbors :-)   Thanks for the review!

  Hello

  In addition to the suggestion of Daavee I would also ask you try another disk of Windows XP installation and also you can try with a keyboard five General PIN and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

  I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

  Hello
   
   
  could a. you give us the exact error that you are experiencing?
  (b) also mention the error code, as well if it is listed.
  have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
   
  
  Let us check if the service is set to automatic.
  1. Click Start-> run and type services.msc
  2. now, locate the service named Windows Defender,
  3. double click to bring up the Properties window.
  4. set the startup type to automatic
  5. click on apply, and then click Start
  6. click OK, and then click Close window Services/Local
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.