Is it possible to use vSphere replication within the same site?

Similar Questions

• Replying to a virtual machine within the same site

  I try to install vSphere replication v5.1.  I do this without SRM, but just the OVF appliance (s).  We currently have 8 guests distributed between two groups.  We have a vCenter control all this, and all is listed in a Data Center.  The second group is in our DR site and has different storage mapped to it.  I try to use vSphere replication as a means to keep our important VM replicated to our centre of DR disaster.  Is it possible to do so in the only current configuration?

  I'm having a hard time comes to work.  I have deployed two replication OVF devices and I'm stuck trying to replicate a virtual machine actually.  It gives me an error that the data object is not found.  I thought that I needed to 'Connect' from the local site to the remote site, but since this is all a time installing vCenter, I get an error indicating it cannot connect to itself.

  Is what I'm trying to do possible?  If not, could you let me know what I need to change to make it work properly.  Thank you.

  Hello

  The scenario you describe is supported - you can replicate virtual machines from one host to another within the same VC.

  To do this:

  -you will need to deploy vSphere 5.1 replication for a VC and no specific host

  -VR requires VC 5.1. If you liked VC - standalone VR will not work. If you have more recent VC, for example 5.5, you need RV 5.5

  -For replication within the VC even you don't need to link to the target site.

  -Simply select the computer virtual you want to replicate, when you opened a session in vSphere Web Client connected to the VC, point to the same location - must be available in the list, and select the appropriate data store and move through the wizard.

  Kind regards

  -Martin

• Google site search keeps all loading on all sites that use it. However, the same sites load with IE.

  Google site search just keep loading forever on all sites that use it. But IE works fine on the same sites.

  I'm using FF 11, but it has also been a problem in previous versions. Win7/64 with the latest updates on a computer laptop xps Dell 15z. CORE I5

  Hello

  Please check if this happens in a new profile. If it's good, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings to another separate location of the files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

• How to use multiple profiles within the same instance of Thunderbird

  A month ago, I got Thunderbird set up with three profiles,
  and all three could be used in a start only one of
  Thunderbird. That the PC is now gone. I've reconfigured the three
  profiles on a new PC, but can't do all three
  can be used in the same instance of Thunderbird. Can you help me?
  Both computers are / were only Windows7 64 bit.

  Thunderbird opens on the default if a profile
  or
  The Profile Manager is responsible to ask at startup it will allow you to choose which profile to open if it opens the last used profile...

  Thus, it shows a profile at a time within a single instance of Thunderbird.

  However, only one profile can have multiple e-mail accounts.
  for example: I run 4 e-mail accounts in a profile.

• 2 refcursors within the same procedure using

  Hello
  Can we use 2 refcursors within the same procedure. This may seem strange. But I have a script to do so - one to dynamically check for some validations and another to return a result set.

  Yes, pass by the example below.

  CREATE OR REPLACE PACKAGE CURSPKG AS
  TYPE T_CURSOR IS REF CURSOR;
  PROCEDURE (EMPCURSOR ON T_CURSOR OPEN_TWO_CURSORS,
  DEPTCURSOR ON T_CURSOR);
  END CURSPKG;
  /
  CREATE OR REPLACE PACKAGE BODY CURSPKG AS
  PROCEDURE (EMPCURSOR ON T_CURSOR OPEN_TWO_CURSORS,
  DEPTCURSOR ON T_CURSOR)
  IS
  V_CURSOR1 T_CURSOR;
  V_CURSOR2 T_CURSOR;
  BEGIN
  V_CURSOR1 OPEN FOR SELECT * FROM EMP;
  V_CURSOR2 OPEN FOR SELECT * FROM THE DEPARTMENT;
  EMPCURSOR: = V_CURSOR1;
  DEPTCURSOR: = V_CURSOR2;
  END OPEN_TWO_CURSORS;
  END CURSPKG;
  /

  I hope that it would be useful.

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• BlackBerry Smartphones using two BB with the same account of Blackberry.

  Currently, I have a BB 9900 and is considering obtaining a BBZ10. The 9900 has a standard sim card by which the Z10 I think a micro sim. (I still have to talk to my service provider relating to the regime of a sim 2)

  Is it possible to use two phones at the same time, if my provider allows, regarding BB services etc. using the same account etc?

  I thought that I have addressed this before first topic to contact my ISP.

  Thank you.

  Kind regards.

  You ask the subject from the BBID even on both devices?

  Yes, to a certain extent, on the data.

  E-mail and social accounts like Facebook and Twitter works perfectly.

  BlackBerry Messenger will use only a BBID on a device at a time... If you have the same BBID on both devices, you will need to choose which will be your active BBM.

  Of course, the main question to this is if your mobile operator will allow two SIM cards with the same account. Doubtful.

• Can I use vSphere replication for VMs on a logical unit number that is doing table replication to DR site

  Hi guys, could not find the answer on any Docs/KBs. With the implementation of normal SRM, I know you can use a mixture of the two, while a virtual machine is not protected by the table and vR.

  I need to make a site of NEW Dr. C while maintaining the current Bay of NETAPP on protection SRM of Site B.

  Will this be an approach to support? Step 0 is required?

  0 > get my guys to storage to stop replication on LUN - XYZ table (IF ANY) on

  1 > delete virtual machines on LUN XYZ of SRM existing Protection groups.

  2 > use vSphere replication to replicate the VMs who live on the LUN - XYZ

  3 > repeat the process until all LUNS have been treated like that.

  It should work without problem. I would recommend just a change in order to:

  1 (also remove the logic of the PG unit number), 0, 2, 3

  If you want to leave the computer on the same LUN virtual then step 0 is not necessary, but recommended (see below). If want to let the replication logic unit number and can just svmotion the VM, which would work as well.

  From a data protection perspective, as long as you understand the potential complications, I recommend you actually starting with step 2. Technically, you don't want to not have the same virtual machine reproduced several times, in this case since you are in transition, and if you understand that retrieve the VM using a method will break the other, and you can not the virtual machine protection with the two (VR & ABR) in SRM, you should be ok.

  Hope it makes sense. If this is not the case, let me know.

• Protection group virtual machines do not have consistent snapshop point in time using vSphere replication

  As the title, we feel when capturing instant timestamp for virtual machines in a protection group.

  Which means a group of database servers, applications, and others, when drill us test to start the virtual machines in the recovering site files timestamp in the virtual machines are varied.

  Snapshot work is executed simultaneously for all virtual machines in the group when planning replication hit? Or is it because certain virtual machines (like DB) speak more time to complete the snapshot so than others like apps VM completed early?

  Anyone hit this problem? We use vSphere replication instead of array based replication.

  Thanks /.

  Dylan

  Hello

  It is a behavior expected with current versions of vSphere replication - replication source host Scheduler is not aware of any grouping of virtual machines and starts the replica instance to meet the RPO requirements. The decision when to start a new instance is based on the time of loading and transfer to some of the previous instances.

  Multi-vm coherence is on the roadmap for a future release and will describe what exactly you address issues.

  If you use VR 5.5, you may use multiple points depending on the time (JEREMIAH) and after switching some of the old machines instances (represented by VM snapshots) to match the State of the other machines.

  Kind regards

  Martin

• Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster

  Hi, I can do storage Vmotion OR Vmotion between Intel and AMD hosts within the same group?

  Thank you

  No, it is not possible to vmotion or storage vmotion between CPUs from different manufacturers - I heard rumors that two manufacturers are working on technology that will help in the future-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Link chart action for refreshing a report of region within the same page

  Gurus of the APEX

  As long as we have the graph and report region region on the same page and based on the action of graph link must be able to refresh the report region within the same page

  for example: I expense spend by category such as a pie chart and on the link of the action of which I want to refresh a report region by the right of it (in the same page) to show the details contained in this category spend - also I do not have to réactualisiez around the same page, just to refresh the region related to the category Click on the graph

  Any help would be great on this - I use APEX 4.2

  Thank you

  Shas

  Thanks Tom / Scott - sound now worked

  Following my code for the javascript function in the page section,

  function clickPie (pID) {}

  $x('P4_ITEM_CATEGORY').value = pID;

  $('#CategoryDetailsDD').trigger ('apexrefresh');

  }

  And here is my URL of the link graphic action section

  JavaScript:clickPie("#label#")

• Practically in segregation a virtual machine within the same network

  We have a VMware ESXi 5.0.0 (504890) host that has physically 4 network cards. We run 3 VMs on that host and turning a new config. However, this new virtual machine will replace our old Windows DC, DNS, server DHCP etc., and we'd like to config it before going live - will not perform us a migration of swing. We are a little worried that it can interfere with our direct network and that's why I would like to somehow almost segegrate it.

  For the moment, we have a single vSwitch0 linked to all our VMs and management card:

  

  What is the best way to do this so that our new DC (with the same domain name and within the same network) can be configured without it interfering with the current network.

  Thanks for your comments.

  Oliver

  Hello

  You can create a second vSwitch without physical network interface cards. Create a VM Portgroup on this vSwitch.

  You can configure your new virtual machine to use the Portgroup. So, he won't have any connection to your network.

  The good thing is, when you want to test things with a customer, you can create a second VM and configure it to the same VM portgroup on the second vSwitch.

  Two virtual machines on this Portgroup can communicate with them because the traffic is handled internally by the host.

  Tim

• The orange button Firefox used to be on the same line as tabs, how to move the tool bar of tabs to be on the same line as before?

  I now have the Firefox button orange on its own line at the top of the page, but it used to be on the same line as the toolbar tabs which takes less space. I know what happened before I put right but cannot get back them now on a single line.

  Make sure that you have selected cover via Firefox > Options.

  You also have to maximize the window to have the tab bar and the Firefox button in the title bar.

  You can also set the pref browser.tabs.drawInTitlebar Boolean to true on the topic: config page.

  • http://KB.mozillazine.org/about:config

• Let me know if there is an option to differentiate is with the color of the tab or return background color tab. I use to open differrent pages on the same site in different tab or window, in order to identify each i

  Let me know if there is an option to differentiate is with the color of the tab or return background color tab. I use to open differrent pages on the same site in different tab or window, in order to identify each...

  Try:

  • Colorful tabs: https://addons.mozilla.org/firefox/addon/1368

• If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  If you use Firefox I can not long enlargement of two fingers to work on my Apple. The same site will expand using Safari, so I guess it has to do with Firefox

  Some actions have been removed in Firefox 4 and later versions.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  browser.gesture.pinch.latched -> false
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.