How to start U300s USB? [SOLVED]
Hello
I try to install Linux on my U300s but I can't seem to understand how to enter the BIOS to boot from USB. This is because when I turn on the laptop I do not get a screen that says "press foo to enter BIOS setup" or similar. It goes right into the windows loading.
Concerning
davidmn
This was not it.
I discovered that, by default, the QuickStart thing was activated by default. Basically, which ignores the Lenovo logo at startup. To get into the BIOS, I just had to use the recovery button while the machine was turned off.
Sorted.
Tags: Lenovo Notebooks
Similar Questions
-
Satellite A300-1EC - how to start openSuse Linux from USB HDD?
Using the desktop PC, USB HDD was installed openSUSE. The computer starts from USB HDD fine. On the laptop installed windows 7. I tied USB HDD for notebook and laptop computer reboot, select by pressing F12 boot USB, but the HARD drive loading specifications internal (WIN 7).
What I've done wrong? How can I boot from USB HDD?
Hi aliks-os.
I m not owner of the Satellite A300, but maybe that it doesn't support boot from USB HDD...
Connect the HARD drive before you turn on your laptop. Then turn on your notebook and press F12 to access the start menu.The USB HDD is listed? Can choose you?
-
How can I resolve USB arbitration does not start error 31: a device does not work
Any ideas how to fix or troubleshoot this error.
I read the following thread but has not been able to post to the thread (because it was LOCKED).
I bought a new Win7 box and VMWare Workstation 7 is installed. It works great EXCEPT that I can't access USB devices. To start the virtual machine, I get an error saying:
Disabled host devices USB connections.
The connection to the VMware USB arbitration service has failed. Please check the status of this service in the Microsoft Management Console.
I watched the news of C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-SYSTEM-###.log, and there is not much more than the above error. It is shown below:
-
10 Nov 05:10:24.039: usbArb | Journal for VMware USB Arbitration Service pid = 3520 version = 3.0.0 build = build-203739 option = output
10 Nov 05:10:24.039: usbArb | The process is 32-bit.
10 Nov 05:10:24.039: usbArb | Host codepage = encoding windows-1252 = windows-1252
10 Nov 05:10:24.039: usbArb | DICT - USER PREFERENCES C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\preferences.ini
10 Nov 05:10:24.040: usbArb | DICT - C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\config.ini default USER
10 Nov 05:10:24.040: usbArb | DICT - HOST by DEFAULT C:\ProgramData\VMware\VMware USB arbitration Service\config.ini
10 Nov 05:10:24.040: usbArb | DICT - of the SITE by DEFAULT C:\ProgramData\VMware\VMware USB arbitration Service\config.ini
05:10:24.042 nov 10: usbArb-3536. USBArb: From VMUSBArbService args: "VMUSBArbService."
05:10:24.043 nov 10: usbArb-3536. USBArb: USBArbInit failed with the error: 31
05:10:24.044 nov 10: usbArb-3536. USBArb: Stop service, status: 31
-
I looked at some of the newspapers (but there were too many pass by) to current user\AppData\Local\Temp c:\users\. Newspapers have been named: vminst.log, vmsetup.log, vmmsi.log. I can post them if it will help, but there are several of them and different copies under different users (admin1, user1, user2, etc.)
I tried to manually start the USB Arbitration Service and it starts not (same simple error, error 31 above).
I looked for a "AMD USB filter driver ' to turn it off (it worked for someone else) but not found one installed.
My configuration is:
Hardware: HP Pavilion Elite - AMD X 4 2.6 GHz 8Gig DDR3
SE host: Windows 7 Home Premium, 64-bit (Build 7600) 6.1.7600
Guest OS: Win XP Pro SP3 (but I think that the problem is not related to the guest)
VMWare Worksation: 7.0.0 build-203739
I like the speed of the system, but I also met problems disc cloaning (for some reason, the SATA drives are not detected by some software disk imaging). I was able to get the ghost at work but not Acronis, Paragon or. I think that it is a separate issue but leaving it where it is important. In these cases, the messages indicated that the X 58 chipset (I think this is right, but I'm not positive). He is a level too low to follow me.
I have fought this same problem on a Vista machine.
Try to right click on one of the USB hubs and looking at the details of the driver. If usbfilter.sys is listed open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter.
I rebooted and it works fine now.
Shad
-
How to start working with BPEL [SOLVED] - but again can anyone help me :)
Hi all
I'm Fizzz, I'm totally new to BPEL. I don't know where to start and how to start.
Right now I'm working with JDeveloper 11 g R1. I didn't not go even further, but now I have to create a BPEL process that can integrate with my Web Application. There are some transactions to be approved or cancelled of BPEL and if the Transaction is approved, then I need to update this Transaction of Peoplesoft database. I have 1 week to learn it. and then I have to start my work.
But I don't really know where to start? What do I need? And how to proceed?
Anyone can suggest me the steps I can take to get started with BPEL and done with Peoplesoft connectivity?
I would appreciate your help.
Thank you
FIZZZ...
Published by: Fizzz on November 24, 2009 17:14go to this link
http://www.Oracle.com/technology/sample_code/products/SOA/index.html
Download the examples, you'll find a workflow folder inside that you have many examples of human workflow that reflects your requirement
-
Flow 11: 11 flow will not start on USB
I can't get the PC to boot from a USB key.
I made a backup of any HD using Partition external USB copy software and I wanted to confirm I could use this backup to restore my system, but I'm not able to get the PC to boot from the USB key.
Use a USB/SD card adapter into the USB port with class 10 new Samsung 32 GB SD card. I can visualize the content of the USB with Windows Explorer and the partitions and the content seems OK.
I put the BIOS boot sequense on external USB drive as the first but I get an error message on the device starts plu at startup.
Hi @RogerM-Ohio,.
Welcome to the HP Forums!
It's a great place to find answers and advice
You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:
Learn how to post and much more.
HP does not support the software of third parties such as the copy of the score.
You can try to put it directly on a USB and not on a SD card. Here is a link to microsoft - News.com on How to create a USB bootable for Windows 10.
Here is a link to computers HP - creating and using a recovery of Microsoft USB drive (Windows 10) that can also be useful.
Please let me know if this helped.
Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!
To show recognition for my efforts, please click on the Thumbs Up icon below.
-
How to start an iMac that keeps locking down to halfway through to start?
How to start an iMac that keeps locking down to halfway through to start?
What is your most former showing Mac in your profile? Or a new brand?
Head to your nearest Genius Bar are a great way to solve these questions - I suggest you make an appointment. the diagnosis is free. If this is a new Mac, take advantage of your guarantee and contact Apple technical support.
-
Please let me know how to start firefox in SafeMode to my windows 2000 server.
I installed R-kiosk and now I am unable to remove it. In windows 2000, there is no folder for firefox.
So please let me know how to start firefox in safe mode on a windows 2000 OS...Thank you very much...
But I just solved the problem. I haven't doneStart > run >
"C:\Program Files\Mozilla Firefox\firefox.exe"-safe-mode
Safe mode started... -
laptop HP 2000: how to start my laptop hp 2000 pc using CD ROM
I NEED TO START MY LAPTOP HP 2000. BUT I DON'T KNOW HOW TO START USING CD ROM. CAN U GUYS HELP ME SOLVE THIS PROBLEM
Hello
To install Windows 7 64 bit on a disc with a guid partition table you need to do the following.
Judgment of the laptop.
Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).
Under the System Configuration tab, expand the Boot Options Menu.
You must set the Secure Boot to disabled and legacy devices on " Enabled".
When you're finished, press f10 and select this option to Save the changes.
You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.
Insert the Windows 7 installation disc and the laptop shutdown .
Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).
Use the arrow keys to select the CDROM (uefi) option ( Note: you must choose the cdrom option that has the (uefi suffix ) and press ENTER - if you are prompted to "Press any key to continue...) "- make.
Kind regards
DP - K
-
How to use a USB Apple Super Drive?
How to start to use a Super USB drive?
Connect it to a free USB port on your computer. In the upper corner of your keyboard is a key with a picture of triangle highlighted. Insert a disc into the slot. To eject the disc select its icon on the desktop and press eject on the keyboard. It is the key in the upper corner of the keyboard and has a picture of triangle pointed out in this regard.
-
How to start using the Windows XP cd?
Can someone tell me how to start using my Windows XP cd (I don't know what it is). I have XP Professional on Lenovo ThinkCenter. Also how to enter to the Recovery Console (not sure how to do this). Thank you
OK it's on my other desktop Lenovo ThinkPad ThinkCenter A61 model type 9120CT 0, with XP Professional. This calculation allows to logoff users once they have logged in. So I went in Rescue Recovery 4 and has a completely restored system since the last backup. There was a widow of MISTLETOE and a button to select. It wasn't a problem because we did not all pictures stored in this computer. (Thank God!).
Now at least user can connect, go to Windows Explorer, Internet Explorer etc...! I'm still trying to understand if there are other problems outstanding. So far have not found any :)
Thank you for giving me encouragement barely pull these questions, especially since I have never fixed before computer problems. Just by chance, sometimes I have 2 laptops and 3 desktops desktop PCs. And I could just not afford constantly hire someone to solve.
Just one last question, what is the combination of anti-virus software do you recommend me to use? Thanks again.
-
Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?
Hi Comintern,
· Did you do changes on the computer before the show?
· You receive an error message or error code?
Follow the suggestions below for a possible solution:
Method 1:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Let us know the results.
-
Judgment of spooller Vista. Why? How to start?
Judgment of spooller Vista. Why? How to start?
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right. -
How to start VDS in Windows Vista Ultimate 64-bit?
I have a problem, and it's been a while and still not solved...
I have Windows Vista Ultimate 64-bit right now and I want to upgrade to Windows 7, but installation is NOT going through perhaps because of the virtual disk service.
How to START the virtual disk service? Everytime I try through services, I get an error 3: the system cannot find the path specified.
Please tell me HOW to start the virtual disk service. and please do NOT move this thread on the forum windows 7, I posted in the front Vista section and moved to the region of Win 7, where my problem has not been resolved. Please leave it in this section. Thank you.
Ok. The file is in the right place. The registry is missing the path tothe file. Wonder how that happens - sigh?Type Regedit in the search box of the start menu.Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\vdsRight-click on an empty area in the right pane - choose new - extensibleString value. Name ImagePath (F2 key renames it). Double-clickImagePath and assign%SystemRoot%\System32\vds.exeNow you can start the service?--..--"Jouho" wrote in message news: b35bf627-5 c-4 c 17 72-91df-57439b0880bf...> Thanks for the reply!>> Here are 2 pictures of 2 orders that I put in the command prompt, which> that means?>> http://oi54.tinypic.com/330chll.jpg>> http://oi55.tinypic.com/x0ohhi.jpg>>>> Thank you> -
Hello, I have a problem starting my reciently downloaded GMchallenge3 (chess program) program. I bought yesterday from the target in the form of a CD rom and installed it on my computer. He started a half an age of time. However, now it does not start when I click on it in the start menu, after that I have let the axess programme on my computer. Can someone tell me how to start to solve the problem? Thank you.
It's Vista Security Forum, NOT the Forum Vista programs.
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe
O run as admin.
See you soon.
Mick Murphy - Microsoft partner
-
I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __
Hellocould a. you give us the exact error that you are experiencing?
(b) also mention the error code, as well if it is listed.
have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
Let us check if the service is set to automatic.1. Click Start-> run and type services.msc
2. now, locate the service named Windows Defender,
3. double click to bring up the Properties window.
4. set the startup type to automatic
5. click on apply, and then click Start
6. click OK, and then click Close window Services/LocalWe hope to hear from you soon.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
The colors are almost sepia in shading
-
How to make file doc for my laptop
How can I find file doc for my computer so I can use my software in sharig?
-
FAILURE ID: 9GAL3X-5RL6P6-QFPH4K-60BT03
Got the above failure. I can change the Hard Drive 1, but this is necessary. What does the above ID failure? Too bad, that are passed to the domain of the laptop.
-
Reg: SGA increase although many SQL Analysis again occurs
Hi allTake into account there is no binding of variables used in SQLs and Oracle analyze again the same whenever SQLs.In this case, if the Application could not be redesigned to use bind variables instead of literals, can we still go with increase in
-
Why professionals in Cambodia doomed to use illegal or expired software Adobe?
Best,For the branch of our Web Development Agency Cambodian base, that we intend on upgrading our software design CS5 CC only to find out that the Adobe software is not available for purchase in Cambodia.Why is that professional companies as we are u