How to started chk dsk on a drive in Vista?

Similar Questions

• How to start in my external hard drive to Windows 7 on my iMac?

  Hello

  I new here and just want to start in Windows 7 with boot camp on my iMac running Mountain Lion.

  I was told this software can do, but I am confused how.

  My drive hard win7 is currently connected to my iMac via a usb adapter. How to start up in it?

  Thank you.

  There are additional manual changes must be made to the .vmx config file to allow the Virtual Machine to be suspended not and do not taken Snapshots in order to have it comply with the same conditions imposed on a partition boot Camp install Windows when it is running as a Virtual Machine.

  This was repeated several times in this forum by myself and others so you should be able to search and find details of I synopsized here.

  I had a quick glance, but you would be kind enough to post a link to this part.

  Take a look at: changing the file .vmx for your VM from VMware Fusion (1014782)

  To keep the Virtual Machine of suspension, you do not want to do when you use a physical disk, add the following option in the .vmx config file.

  suspended. Disabled = "TRUE".

  To avoid having the pictures taken using the following option syntax:

  ide0:0. DeviceType = "rawDisk.

  Note that if the physical disks hard was created as a (free) SCSI vs IDE, then ide0:0 would be scsi0:0.  Note that this option can be added automatically when adding a hard pointing to a raw disk, do not remember for sure and no were not I can test at then time, so the option may already be present but if not then add.

• How to start on Satellite A660 HARD drive recovery?

  I recently bought by Satellite A660 and the laptop has been infected with can of virus will start any program even couldn't do any disk recovery. So I try to read the FAQS and guidance that I tried to do the hard drive's default factory setting.

  I follow the directions "Press 0 & combination Power button" at the start of the hard disk to recover the system.

  Make a hard drive recovery system still ask for disks. Therefore, in this case there is no solution. Please let me know how I can do hard drive recovery system.

  Thank you

  Can you please tell me what model of laptop you have exactly (A660-xxx)?
  What is this Europe or US model?
  > Making the hard drive recovery system still ask for disks.
  I put t understand it. Can please explain you a little better?

• Satellite A300-19 q - how to start with an external USB drive

  Hi all!

  I have a (old) TOSHIBA Satellite A300-19 q bought in 2008. I wanted to do a clean install of Windows 7 by reformatting my HD. The problem is that my internal DVD drive no longer works. So I tried to boot from the Windows 7 DVD installation with an external USB drive.
  Unfortunately, I couldn't find a way to boot from USB devices in my BIOS options.
  My BIOS is up to date (version 4.20) from Toshiba Web site.

  So I was wondering, does anyone know if the A300-19 q can boot from USB devices?

  Thank you in advance.

  I have A300 at home but I never tried to start with an external USB device.
  Start your laptop and press F12 to get into the boot menu. There must be USB option. What happen when you try to use it?

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• How to start Windows 7 system recovery?

  Hello

  I have a Toshiba Satellite laptop computer Pro in windows 7 that crashed with what I've said is a bad blue screen with white text hordes.
  Recovering laptops in the past for me and others in the past, but am stuck bigtime, as theres no recovery disk or whatever it is.

  Have you tried many methods, but to no avail. How can I fix this please?... I briefly looked at the Toshiba site, but looking at what, in my view, could be the cure, might be the wrong thing to download...
  Thank you

  Hello

  How start the recovery, the installation is described in s manuals this document can be downloaded from Toshiba support download page http://eu.computers.toshiba-europe.com

  How to start the installation of HARD drive recovery is described in the follow-up paper - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If you have any other questions let us know.

• How can I configure my computer to start automatically on the hard drive?

  When I connect to my desktop does not start as it tries to boot from the floppy drive. I have to press F9, then when I see "Select first boot device" scroll down to the hard drive. How can I re set my computer to start automatically on the hard drive?

  How can I re set my computer to start automatically on the hard drive?

  It would depend on the BIOS you have.

  What is the brand, model and model number of your PC?

• How to start the lumia 2520 from a bootable flash drive

  Does anyone know how to boot from the flash drive on the 2520 Lumia running Windows 8.1 RT? How can I tell the 2520 to boot from the flash drive and not the hand 'drive '.

  Hi Holeck,

  We have an article of Microsoft that has steps on how to start Surface from a USB device. Try the steps mentioned in this article:

  Surface from a boot USB device

  http://www.Microsoft.com/surface/en-CA/support/storage-files-and-folders/boot-surface-Pro-from-USB-recovery-device?LC=4105

  You can contact the Nokia support for assistance on this issue. Check out the link:

  http://www.Nokia.com/us-en/support/product/lumia2520/

   

  Please keep us informed on the status of the issue. We will be happy to help you.

• CHK DSK/r & CHK DSK/p does not solve blue screen UNMOUNTABLE BOOT VOLUME... any suggestions?

  Hi, need help please. After an update of windows, there was a couple of error message on my computer, and then one day, he came with a blue screen at the beginning by saying "UNMOUNTABLE BOOT VOLUME". OK, I googled and he said everywhere to have an installation CD (which I have) and then perform the CHK DSK/r, CHK DSK/p or CHK DSK/r/p that I did all 3. Then I typed in FIXBOOT c:... ok, well... seemed so I typed in the output. Blue screen again! He tried again and again without success. I would NOT be this format... we have a lot of customer files on this computer... ANYTHING else out there to try? I can't find any other information. Any help would be GREATLY appreciated. Thank you...!

  Hello - there was only 1 partition, and I think I know what it was. It was see the external hard drive - which I NOT formatted and works very well - and now that I have disconnected, he says "hard drive not found '. Now, I can not format the main computer! Should I rehook it? I just don't want this external hard drive to be formatted. How to format my computer (since CHK DSK does not work) with the CD? I just get the message 'cannot see the hard drive. Thanks for your help.

  N ° not re - hang. In fact, you must disconnect all devices from the computer except for your keyboard and your mouse. This includes, but is not limited to, your printer, card readers or other devices other than your cd rom of course media.

  The error you receive is probably due to your SATA controller driver is not being installed. Restart the computer and enter the bios. See if you can find the option to disable the AHCI or RAID and IDE SATA (SATA/PATA) emulation mode. Windows should detect your hard drive.

  Finally, if you are unable to find the option to turn off the AHCI/RAID mode, provide me the full brand and the model number of your computer.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• How to start the factory reset on the Qosmio F50-125?

  I'm going to get in trouble with resetting factory my laptop. I google and answers most needed to press 0 in starting up, but it does not, the leptop occurs just with commissioning.

  How to really factory reset this model? (I do not have any backup) + I would like to reinstall windows.

  best regards and thanks for the help at the front

  Hello

  I don't know why you're wasting your time Googling autour. Everything is described in s operating manuals. If you download the user s manuals document and check the 66 page, you will find an exact description how do.

  Please check the instructions and try to start the installation of HARD drive recovery.
  By the way: you have created recovery DVD media?

  If you still have questions, feel free to ask.

  Good luck

• Satellite X 200-15 k - how can I activate the advanced buffer HARD drive under vista?

  How can I turn on buffer advanced performance HARD drive under vista? This option is not available for this drive?

  * Check this box: *.

  1. right click on the computer in the Start Menu, then select Options.
  2. click on advanced on the left system settings.
  3 select the Hardware tab in the System Properties window.
  4. click on the Device Manager button.
  5 expand disk drives.
  6 right-click on a hard drive under disk drives, and then select Properties.
  7. Select the policies tab in the Properties window for the device.
  8. check Enable advanced performance.
  9. click OK to save the changes and reboot your computer.

  If this is not possible then the buffer of advanced performance is not possible with this HARD drive.

  Hey Buddy

• How to use a USB Apple Super Drive?

  How to start to use a Super USB drive?

  Connect it to a free USB port on your computer. In the upper corner of your keyboard is a key with a picture of triangle highlighted. Insert a disc into the slot. To eject the disc select its icon on the desktop and press eject on the keyboard. It is the key in the upper corner of the keyboard and has a picture of triangle pointed out in this regard.

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• How can I get my fixed CD drive? Device Manager says "Driver may be corrupted or missing" B

  How can I get my fixed CD drive? Device Manager says 'driver may be corrupted or missing.

  But when I click on update driver it says "your driver is up to date" and refuses to fix it.

  Hello:

  I found this link where a person fixed a similar problem with editing the registry.

  Make sure that you back up all personal files you do not lose to a portable hard drive and create a restore point by using System Restore utility first, because editing the registry might cause some problems with your PC, also do not start and you have to reinstall the operating system.

  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Paul

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW