How to stay safe when destroying Windows XP?

Similar Questions

• How to exit safe mode in windows 8.1

  I entered in the Mode without fail my desire TS 15 running windows 8.1 to correct some problems with my Norton software and now I can't understand how to exit back to the normal mode.  Internet is off in safe mode (even though I chose the mode safe mode with networking) so I can run any of the resolutions & assistance.  Someone knows how to do this?

  Nanna,

  Welcome to the HP Forum.

  Try / review

  Control Panel > display icon > Administrative Tools> System Configuration >

  Boot Tab > UNCHECKstartup

  Restart/ reboot the computer and log in

  OR

  A different path to the same place:

  ·         Start Notepad and let it boot mode safe

  ·         Open a session

  ·         Windows key + R(open the run window)

  ·         Type msconfig

  ·         Opens the System Configuration Menu > tab click on Boot

  ·         REMOVE the check mark next to startup > Applyto save

  ·         Restart/ reboot

  ==========================================================================

  In addition, you could do your router security is set to

  AES encryption type

  and

  WPA2-Personal security type

  ==========================================================================

  For later, it's very useful to have, and it is easy to set up.  I did it.

  Safe mode can easily be added to the start screen.

  How to add 'Safe Mode' to the Windows in Windows 8 boot manager and 8.1

  From:
  Features of Windows 8 - a Quick Tour

  Click on the Thumbs-Up Kudosto testify and say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• How do I know when a window is activated?

  Hello
  I'm looking for a way to know when a step (window) is activated or not. For example, to change the appearance of the decorated window.
  The methods of Swing to do are:

  WindowListener.java:   
  
           //
              // Invoked when a window is activated.
              //
              public void windowActivated(WindowEvent e) {
                  System.out.println("Window Activated Event");
              }
   
              //
              // Invoked when a window is de-activated.
              //
              public void windowDeactivated(WindowEvent e) {
                  System.out.println("Window Deactivated Event");
              }
   
              //
              // Invoked when a window state is changed.
              //
              public void windowStateChanged(WindowEvent e) {
                  System.out.println("Window State Changed Event");
              }
   

  I know that methods setOnXXX() of the Stage class but I have found the equivalent for the "activation".
  Thank you very much.

  Well, what the hell not "activated" mean? Never heard of him. (Probably because I've never worked with Swing)
  Sorry for that. So I can only imagine what you mean. Want to know if the user has focus on a specific scene?
  Next, you will

  stage.isFocused()
  

  Hope that it is the one that you want, greetings.

• Num lock stays lower when open windows 7 hp

  When I connect to windows 7 and enter my info after entering my password the NUMLOCK is on. What can I do to make sure it is unlocked when you open windows.

  Has it always done this?

  There is a setting in some BIOS motherboard that lights up the blocking numbers.

  See also this:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-How-to-turn-off-NumLock-at-the-logon/0feb11e6-BD9E-48fa-BBB3-84ff28d9c6fd

• How do update you when your Windows Update is crushed

  What to do if your computer had to be refreshed because an update has been applied to Microsoft Office that has failed and uninstalled the program and then you refreshed your computer to make it work again, but he had to go through a bunch of updates (on a 109 updates, because your computer was first on programming Windows 8) When these updates of events, they put you through an endless loop saying: "failed to configure Windows updates. Returning Changes. "then when you refreshed, you try to install updates by yourself, but then Windows Update crashes and you can't click on Windows Update without going to the task of any Manager to restart. What in the heck are you doing?

  Hello, anyway, I know this goes its a little rough, but I fixed my computer by myself through these series of steps:

  1. first of all, my computer took to always just to load the WinUpdates screen, but he did it yesterday. When this has happened, I discovered that the WinUpdate service stopped running.

  2. then, I have set out on the adventure to set this service. I seek my services application and I realized the only reason why he stopped was because I do not know exactly why, but I know I could fix it.

  3. I'm looking for a way to start again. Nothing. It was a cruel joke. I got bored waiting for answer you. So I restarted my computer and to find out, the service runs without problem. So maybe, I didn't need to go to this place and ask. Well, oops. In any case, fixed by myself. And if you answered these steps through your long way of fixing my computer, so I was not paying attention.

  PS: Thanks for trying to help.

• How to continue playing when first window not on focus?

  I make films at home in first, which is to put together a large number of spontaneous clips.

  Because of this, I have to censor them on the editing table so that no disgusting, chatty commentary or insulting gets burned on a disc and sent to the members of my family.

  Adobe first stops playing as soon as any another window gets focus, which means that I have to watch the whole of the project (2 hours), even if I only listen to it, maybe I could be browsing the web, chat, etc..

  Is there a way I can force the first to play the project while being in the background?

  Thank you.

  PS the same thing happens with again.

  Is there a way I can force the first to play the project while being in the background?

  N °

• How can I start/re-start Windows professional XP in safe MODE

  How can I start/re-start Windows professional XP in safe MODE? Aid filw I get only instructed on XP Home Edition and the buttons and it tells you to follow the guests do not appear in the professional edition. I need the instructions for Pro.  Can someone help me with this?

  Original title: Safe Mode

  You can start either home or Pro in SafeMode by this technique...

  Keep F8 hitting twice a second immediately after you have switched on the PC. You should get a boot menu where safe mode is selectable using the up/down arrow keys.

  Or, use the msconfig utility. When you do it this way, Windows starts in SafeMode permanently until you reverse the changes in msconfig...

  • Click Start
  • Click on run
  • Type msconfig and press enter
  • Click on the CHEST. INI tab
  • Check the box for/SafeBoot
  • Click OK
  • Restart the PC when prompted

  Tricky

• How to go in safe mode on Windows 8, if the computer does not start?

  Recently, my computer won't start, suspended to the start screen. In order to diagnose certain things, I need to get through safe mode. In earlier versions of Windows, I'd use F8 to get in. However, this is not an option in Windows 8. How would you like to do in safe mode on Windows 8 if the operating system does not start?

  Hello

  This gives a try... sometimes it will not work with multiple partitions of hard disks installed because it looks like bad... It might work from a repair also disc...

  1) start from the Windows 8 DVD
  2) click Next
  (3) select repair your computer

  (4) select troubleshooting
  (5) select Advanced Options
  (6) select command prompt

  (7) type - Bcdedit/set {bootmgr} displaybootmenu Yes (note the spaces)
  (8) type - out

  (9) restart

  (10) to the start screen, select F8
  (11) to select Safe mode with networking

  This can then be turned off when you are finished.

  (1) run by the lower left corner (Admin) command prompt right-click when Start appears.

  (2) type - Bcdedit/set {bootmgr} displaybootmenu not (note the spaces)
  (3) type - out

• I just changed to Firefox 10.0. How is it that when I click on my favorites I get a bar that opens on the left side of my window? I must return to my bookmarks icon to close the

  Since I installed Firefox 10.0 when I open my favorites, I get a side window that opens and stays open when I click on a bookmark. I must return to the icon at the top to close the side window. In the past when I would get the bookmark drop down which disappears when I clicked on a bookmark. Is there a way to go back to the way that it used to be?

  Looks like you are using the toolbar icon that opens the bookmarks in the sidebar and not button Menu bookmarks with the drop marker that opens the menu drop down.

  Versions of Firefox 4 + have two buttons bookmark with a star in the window customize.
  
  A single star button has a marker to drop that open Bookmark menu.
  
  The other star button without the marker drop open bookmarks in the sidebar.

  You can drag the button customize menu bookmarks with the marker in the window in the palette of the toolbar on a toolbar (for example, the Navigation bar) or the tab bar or on the left side of the bookmarks Menu items.

  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

• How to enable Media Player in Windows XP safe mode

  Does anyone know how to enable Windows Media Player in Windows XP safe mode? I sound activated in safe mode but Windows Media Player does not work, it will not only open and there's nothing in Task Manager which shows that it is running in the processes list. It depend on what services? Media Player works fine in normal mode, but only in safe mode.

  Any suggestion would be appreciated

  Hello Victor,.

  I don't think that it is possible to get Windows Media Player to work in Mode safe as it does start normally.
  I suggest that you work on the main problem which is screening at the blue start of your machine. I suggest you post a thread on our repair system and the recovery location here:
  http://answers.Microsoft.com/en-us/Windows/forum/system?page=1&tab=no

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• How to get the options standby or hibernation in safe MODE? [Windows 7]

  I searched and sought, could not find anything either, but my thick head still think there may be an answer somewhere.

  He said that I couldn't not Audio on safe MODE, got it working very well after following a tutorial. I think that the same thing can be done with the SLEEP or hibernation, I could be wrong.

  Now, I still want to know how to get the SLEEP or HIBERNATE in safe MODE,
  I don't care if my attempts to spoil anything on this shit pathetic excuse of HP Compaq for a laptop. I don't want any other help other then getting options 1 or both. This laptop has built in fan (had 3 other fans do), so why I run safe MODE or it would melt faster.

  -Windows 7 Home Prem 64-bit.

  TLDR;  Anyway to get the sleep or Hibernate in safe MODE?

  Hello, Spencer,.

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Shawn "Cmdr" Keene [MVP] replied on May 28, 2014 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/sleep-in-safe-mode/d91b5ec4-8c45-4D6E-A899-eaba36209de0?DB=5

  Additional information:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to ensure the backup of Windows 7 starts and runs until the end on a laptop which is mode standby, or could be put in mode 'sleep' when the lid is closed.

  Hello

  Many of us with laptops with Windows 7 would like to ensure that, when a Windows backup is scheduled, it starts successfully and goes to full completion, regardless of whether the phone is first 'sleep', or if the user of the laptop close the lid of the laptop, which would normally the laptop mode 'sleep'.  In other words, how to backup Windows or Windows 7 be configured to wake from mode "sleep" and prevent it from sleep mode, when a backup is scheduled and actively running?

  I saw a way to schedule a task that will wake the computer, but I'm looking for something more intelligent than that.  I'm looking to see if Microsoft has already thought this through and allow you to pre-configure operating system such as we have no additional installation software.

  Thank you

  Dave

  We continued this thread in http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-do-i-keep-windows-7-from-sleeping-in-the/9602fbe6-f9d2-461d-88ee-710369e6f543

• When I use not comp. for 5 min. tt stops. How he stay longer.

  When I do not use Comp for like 5 min it shuts down. How he stay longer.

  When I do not use Comp for like 5 min it shuts down. How he stay longer.

  It 'stops', or does it go to sleep?

  Change the settings of your screen saver, sleep or Hibernate.