How to store the query string value in the scope of the session in webcenter spaces?

Similar Questions

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• How to store the output of a statement select * statement in a file?

  How to store the output of a statement select * / statement of dsc in a file?

  As user sys:

  CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
  /
  GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
  /
  

  As myuser:

  CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                       ,p_dir IN VARCHAR2
                                       ,p_header_file IN VARCHAR2
                                       ,p_data_file IN VARCHAR2 := NULL) IS
    v_finaltxt  VARCHAR2(4000);
    v_v_val     VARCHAR2(4000);
    v_n_val     NUMBER;
    v_d_val     DATE;
    v_ret       NUMBER;
    c           NUMBER;
    d           NUMBER;
    col_cnt     INTEGER;
    f           BOOLEAN;
    rec_tab     DBMS_SQL.DESC_TAB;
    col_num     NUMBER;
    v_fh        UTL_FILE.FILE_TYPE;
    v_samefile  BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    d := DBMS_SQL.EXECUTE(c);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
        WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
        WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      END CASE;
    END LOOP;
    -- This part outputs the HEADER
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
    FOR j in 1..col_cnt
    LOOP
      v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
    END LOOP;
    --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
    IF NOT v_samefile THEN
      UTL_FILE.FCLOSE(v_fh);
    END IF;
    --
    -- This part outputs the DATA
    IF NOT v_samefile THEN
      v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
    END IF;
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT WHEN v_ret = 0;
      v_finaltxt := NULL;
      FOR j in 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
          WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                      v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
          WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                      v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
          WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                      v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
        ELSE
          v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        END CASE;
      END LOOP;
    --  DBMS_OUTPUT.PUT_LINE(v_finaltxt);
      UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
    END LOOP;
    UTL_FILE.FCLOSE(v_fh);
    DBMS_SQL.CLOSE_CURSOR(c);
  END;
  

  This allows the header line and the data to write into files separate if necessary.

  for example

  SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
  
  PL/SQL procedure successfully completed.
  

  Output.txt file contains:

  empno,ename,job,mgr,hiredate,sal,comm,deptno
  7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
  7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
  7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
  7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
  7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
  7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
  7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
  7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
  7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
  7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
  7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
  7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
  7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
  7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10
  

  The procedure allows for the header and the data to separate files if necessary. Just by specifying the file name "header" will put the header and the data in a single file.

• How to kill the session running from work processes

  How to kill the session work processes running... What is the process to be programmed

  BEGIN
  FOR c IN (
  SELECT s.sid,
  s.serial#
  FROM v$session s
  WHERE s.username = 'your_user_name'
  )
  LOOP
  EXECUTE IMMEDIATE 'alter system kill session ''' ||
  c.sid || ',' || c.serial# || '''';
  END LOOP;
END;

• The previous user didn't verify his account. I don't know how to close the session?

  The previous user didn't verify his account. I don't know how to close the session?

  CC just asked me to check it out but it is NOT my account and I do not know whose ID is.

  And now I can not connect with my account. Help, please.

  BTW, there is NOT "Préférences."... "in the setting button.

  Windows:

  Step 1)

  Exit the desktop Adobe Creative Cloud application.

  End Adobe partner all the processes like creative cloud, CoreSync, AAMUpdater, Armsvc... etc. of the Task Manager.

  Step 2)

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe > OOBE. Open the OOBE folder and delete the file opm.db .

  Once you had deleted Opm.db file, run Adobe Creative Cloud application and check.

  Mac:

  Step 1)

  Exit the desktop Adobe Creative Cloud application.

  End Adobe partner all the processes like creative cloud, CoreSync, AAMUpdater, Armsvc... etc of Activity Monitor.

  Location: Applications > utilities > activity monitor.

  
  

  Step 2)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and delete the file opm.db .

  Once you had deleted Opm.db file, run Adobe Creative Cloud application and check.

• How to specify the color for LR space?

  How to specify the color for LR space?

  chlonini said:

  How to specify the color for LR space?

  LR only uses the ProPhoto RGB color space. You cannot specify any other

  color space (work). When you export pictures, you can specify a

  different color space to convert. Or if you use an external editor.

  You can choose what color space to send to the external editor.

• Eloqua reporting: what is the difference between 'Link clicks' and 'interactive generated query string value "?

  

  Sometimes, I need to look at the link clicks in order to determine what link they clicked and sometimes the value of query string. What is the difference?

  Redirect link is the actual URL that redirects to a specific Web site location.

  Value of query string of clicks is what follows after the "?" in the link. These query strings do not change the location where the user is directed to but is for information purposes.

  If you were to combine interactive generated link and the value of clicks query string, you will get the full link following the user.

  Example: In your screenshot, for the first row in the report, the user would have followed this link:

  https://play.Google.com/store/apps/details?ID=no.osloby.app

  The report broke it into 2 parts: clicks link (https://play.google.com/store/apps/details) and the value of query string of clicks (? id = no.osloby.app).

  You can create custom query strings under configuration > site: query strings. This can be useful if you want to create your own way to mark up and view metrics on clicks for links. When you define a query string parameter, you can add this setting with different values at the end of the links to follow only those (ex: "?") QueryStringParam = value1'). I used this is to differentiate between separate instances of identical links in the same email (ex: a link is a banner image and text) to see who is the most useful and results in the most traffic. You can then view a breakdown of clicks by each query string under Insight > reports and dashboards > site > overview of Query String parameters.

  

  Hope this helps... Let me know if you have any other questions.

• splitting the query string values

  all,
  I do not remember this, but my problem is that I have a collection of forwarded to my query as string values "X 234234: 23466 X: X 03287: X 457675 ', so my request should be able to divide each data value and use in the filter as below,
  
  Select * from emp where EmpID in ("X 234234: 23466 X: X 03287: X 457675")
  
  so, how can I divide each individual value and pass through the filter?
  
  Thank you.

  SELECT trim(x.column_value.extract('e/text () ')) CLO
  Of
  TABLE (XMLSEQUENCE (XMLTYPE (""
  || REPLACE ('1:2:3:4:6:7:8',': ','')
  || ((("").extract('e/e'))) x

  Try customizing the syntax above using the column in the function replace instead of my hard-coded string and pass it to the filter predicate using an in operator.

  Edited by: Chandrakaanth Ramamurthy on April 25, 2013 16:29

• How to store the result of a query in a variable in the data model

  In a model of date I want to do something like this
  
  < name of dataTemplate = than one dataSourceRef "HURDetail" = "BRM_DATA_SOURCE" >
  < Parameters >
  < parameter name = "PARAM_THRESHOLD_VALUE" dataType = "number", defaultValue = "0" / >
  < / Parameter >
  
  < SQLStatement instance name = "Q1" >
  <! [CDATA]
  SELECT count (*) FROM TABLE_NAME
  []] >
  < / sqlStatement >
  
  -I want to assign the output of the above query to PARAM_THRESHOLD_VALUE so I can use it in future requests...
  -My query is complex, for reason of performance I want to store the output of the query.
  
  Please suggest how do...
  Made a package with the PARAM_THRESHOLD_VALUE parameter and the function value entry assigns the done variable to work?
  
  Thank you
  Shiva

  Hey Shiva,

  If you want to use the value of the counter in the other queries in the data model, you can have an alias for the extraction of County and use it as a bind variable in other queries as

  
  SELECT count (*) PARAM_THRESHOLD_VALUE
  FROM TABLE_NAME
  ]]>
  

  and can use it in another query as

  
  SELECT XYZ
  FROM TABLE_NAME2
  WHERE XXX = *: PARAM_THRESHOLD_VALUE *.
  ]]>
  

  Hope this is what you want.
  Thank you.

• How to store and retrieve long values in the store persistent

  Hello

  In my application I want to store and retrieve long values in the persistent store that I used with Longvector and all is well, but LongVector is supported for operating system > = 4.6

  I need to work my request in 4.5 also, can any one infrom me what are the other alternatives, I have to get my pls any abstract requirement...

  Vector v = new Vector();
  fill vector
  Long premierElement = (Long) v.firstElement ();
  myLong long = firstElement.longValue ();

• How to store the information safely register?

  Some require for my application:

  -When remove app, information register is always stay

  -What app, registry info update is intact

  I try with PersistentStore but I still want to see idea of expert for a better solution. Thank you very much!

  If the info should stay, you will need to use a preset to store your information, String, Boolean, Integer, or Vector, Hashtable etc.
  If you put a class of its own in the store that implements Persistable store is deleted if you remove the application.

• How to use several query string in a URL?

  Can someone help me with the use of more than a query string in a URL?  I would like to pass on the details of the campaignID (for the CLR) and industry (redirect after form submission) with a click of an email to a landing page.

  Thank you very much

  Alan,

  There are two posts really great on this topic that should help you get there quite easily.

  First, take a look at the position of glreichertof EE12. EE12 - Do-It - Thomson Reuters - Super power of blind forms

  Then visit chorenfto post on the blind forms. Eloqua10: trigger multiple actions with a click-through email (via 'send blind form')

  I have these two positions of reference whenever I need an update on query strings and always answers my questions.

  Good luck.

  Krista

• How to store the result of the second SP in variable in first SP

  Hello
  
  I have two stored procedures "sp1" and "sp2". I want to call sp1 sp2, but I want to store the result of sp2 in any variable or derive from table or anything else
  
  so that I can use the result of sp2 in sql sp1.
  
  Yours sincerely.

  >
  I have two stored procedures "sp1" and "sp2". I want to call sp1 sp2, but I want to store the result of sp2 in any variable or derive from table or anything else

  so that I can use the result of sp2 in sql sp1.
  >
  Too many questions and not enough information.

  1. the number of rows of data are you talking about?
  2. have you already written procedures? If you could put the two procs in the same package and use a collection of share plan.
  3. what actually does sp2? Could you do it in sp1 query/cursor instead of having a separate procedure?
  4. you could make sp2 a procedure in pipeline and then sp1 can query sp2 such as table data.
  5. for large amounts of data, you can use a global temporary Table.
  6. for small amounts of data, you can use a collection of PL/SQL.

• How to store the backup data set?

  I do a word game that I need to backup my data on PC. I don't know how to do it. Please guide me to record data on pc permanently.

  If you want to store the data of the input textfields, add you text in a table.

  Save the table in a flash cookie when you want (mouse click or other event).

  When you want to recover data just call saved the cookie table.

  It is displayed in the last comment.

  In this code, recording an array (testarray) under flashcookie.

  When you first run the code you get will be saved as undefined data.

  When you run the code once more, you will get the saved table.

• Everyone has understood how to store the iPad pro pencil in the iPad keyboard Smart pro?

  It would be good to keep my iPad Pro, pencil and Smart keyboard all together in the case of the keyboard, but if there is a way to store the pen that I still have to find out.  Somebody has a better chance?

  There is no way of storage designed into it. You'd have to invent and fixing something yourself. Band Velcro comes to mind.