How to stream live video?

Similar Questions

• How to stream a video from Mac to iPad 2?

  Hi people,

  I just recorded a performance continuously, which is two hours of time on my Mac (50 GB).  I want to watch it on my iPad and can't seem to get off less than 1 GB size (by the way, I can't understand how to copy a video to my Mac to the iPad).  So my last resort is to listen to, but then again, I don't know how to set up something like this.

  I'm running a 2012 end Mac Mini with 12 GB of RAM and 740 GB fusion drive, OS X 10.11.4.  My iPad is an iPad running iOS 9.2.1 2.

  Any helpful advice would be really appreciated.

  -Tod

  For video streaming to your Mac via iTunes home sharing, the film should be in iTunes first.

  Then follow this procedure.

  Use home sharing to share content with other devices - Apple Support iTunes

  Good luck!

• How to stream a video in labview?

  I'm now working on Labview Flex RIO. Basically, the task is to play the video file, make wireless transmission, finally the video plays in the receiver.

  The wireless part is done. At this time the transmission of bits all right. My question is how to add the video portion? Is there any vi can read and make the videocoding. All vi can do play and video decoding?

  I'm new to the labview, and my boss needs him for a fancy demo!

  Thank you very much.

  
  

• How to produce live video

  Hello

  All my new amateur newsletters are published after the shooting. I record my video using a canon 5 d mark 2 and a panasonic GH1. I record my audio files on a fireface UFX RME. Is it possible that I could cut between the then live camera and how do I do this?

  Thank you

  You could live streaming with HD - SDI and the appropriate hardware connections, but not with you, cameras and PR.

• How to stream a video from a server

  var nc:NetConnection = new NetConnection();
  NC. Connect (null);

  var ns:NetStream = new NetStream (nc);
  NS. Play ("MySample.flv");

  Video: video of Video var = new (200,100);
  video.attachNetStream (ns);

  addChild (video);
  Video.x = 200;

  As seen above, I have only one idea how to take an external video file that is not in the library.

  My real problem is->

  If I put the swf in a domain and put in the same area this video too, what sholud be like link.

  There is a server rtmp Protocol and fms, I have little knowledge.

  In addition, is available for outside to play in the SWF video files a charger of the url or the request method.

  As I suppose, there will be a change in the parameter null below, but how...

  should I use a fms server or short videos that a link is enough?

  NC. Connect (null);

  With progressive video swf is hosted on the same domain as the html page - you can use a relative to the video url if - use absolute. Absolute is more universal.

  You are coding for gradual release is correct.

  If you have access to the FMS server - stream RTMP is the best choice. To establish the rtmp Protocol, workflow data code should be like this:

  function connect():void
  {
       nc = new NetConnection();
       nc.client = this;
       nc.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
       // connect to the directory where file is hosted
       c.connect("rtmp://www.mydomain.com/videos/");
  }
  
  function onNetStatus(e:NetStatusEvent):void
  {
       switch (e.info.code)
       {
            case "NetConnection.Connect.Success":
                 startVideo();
                 break;
       }
  }
  
  function startVideo():void
  {
       video = new Video(640, 385);
       video.x = video.y = 20;
       addChild(video);
       video.attachNetStream(ns);
       // point to the file itself
       ns.play("interstingVideo");
  }
  

  I have a 4-part more detailed tutorial on my blog:

  http://AS3-blog.NET/?p=346

• Should I have fms and how easy is live for users?

  Hello world

  I'm just studying the requirements for a new project and I wanted to ask you a few questions about FMS if you would be kind enough. The site I am building at will (among others) stream video that has been downloaded (mainly by the admin of the site), but also potentially by users and I need a solution for this. Also (ideally) the site will be live broadcasts every now and then that users can watch. As a result, my questions are:

  -Probably, we'll need to add an encoding software on the site to convert different formats of file in FLV FMS can play them (because it does not include the conversion features)?

  -We would use a relatively powerful dedicated server, it suggests generally that you install FMS on a completely different server or it can run on your primary server (as long as you are not in the service of the ridiculous amounts of video at the same time).

  -Do I have that right to say that if we use FMS so it won't work on the iphone or the ipad the lack of flash support? Is this also true if we use video h.264 rather than FLV files? I understand that even with h264s that it won't work not because the player is flash and therefore it can not read the drive, despite bein able to read the video format. Is there a way around this?

  -FMS can be used to allow users to record directly to the output of their webcam in the correct format for a future (not live) broadcast (like the functionality of my Webcam on youtube) or should it be done through flash media encoder and then saved?

  -Am I right in thinking that to stream live video, you must use Flash Media Encoder and then connect you to the FMS? Is it easy to install media encoder to point to a FMS specfiic (IE is it possible to use it as a solution for the upper limbs to spread or is the installation of the complicated FME)? Is it all to build website so someone can disseminate via their browser and webcam and then have transcode via FMS?

  Thank you very much for your help/info in advance, we appreciate it really heavily,

  Dave

  -I've read php ffmpeg conversion that was an option I was looking at, although presumaby this i would need a separate server because the encoding is pretty processor intensive? Are there other options (even if you have to buy a separate software that is running on the server, this wouldn't be a problem)

  Yes. See our Rhozet carbon coder and Sorenson Squish.

  -Am I right to say that you can use an encoder based flash embedded on your site to encode the videos but only using h.263, which is the worst quality (I know it's what you say below but I just wanted to clarify). Assuming that we were happy to allow encoding in a file of quality slightly lower then is - it possible through FMS or that require other software?

  A flash application can encode only from the camera (for live broadcasting). So, if you want to publish from a webcam for FMS, Flash will do the job. If you want to re - encode an existing video file, flash won't do.

• How can I add a text or title on a live video?

  Please, how to add text or title live video (service event or church) am capture and transmit or export my TI to a screen for viewers to see?

  Post edited by: Kevin Monahan Title has been changed.

  Want to add titles to a live stream in real time?

  If so, then you will probably looking at a material mixing console/switcher, with character features.

  Good luck

  Hunt

• To make a video streaming (live app) which is best? IE, silverlight or html5?

  Hiiii

  I want to develop an application for live video streaming... which should be compatible with internet explorer 9... While technology will be the best suitable and compatible... Silverlight or HTML5? .... I want to start the project please do not answer... which will be better doing live video streaming... could not oly target to internet explorer 9... which might be compatiable... Please guide me...
  Thank you best regards &,.
  Divya.K

  Hello

  The Internet Explorer Web development forum
  http://social.msdn.Microsoft.com/forums/en/category/iedevelopment
  would be a more appropriate forum for your question.

  A web search will also provide opinions and useful information:
  http://www.Google.com/search?q=Silverlight+vs+HTML5

  Hope this helps,
  Don

• Webcam won't let me use special effects, said video streamimg can be H.264 or MJPEG. How do I change video streaming

  Webcam won't be me use of said special effects video streaming can be H.264 or MJPEG. How do I change video streaming

  What webcam do you use?
  What software do you use?

  See the respective manual to operate correctly.

• How to answer a video call in windows live/messenger?

  I am running Windows XP with the updates Windows Live / Messenger with video of telephone services. My webcam works and when I video call my contact, he can't see my Visual incoming call.

  How answer us a video call?

  Polly

  Hello Polly,

  Try the steps listed in the article below and check if it helps you to fix the problem.

  Impossible to establish a webcam with Windows Live Messenger conversation

  If this does not help, post your request in the instances of Windows Live for assistance on this issue.

  Windows Live Messenger Support Forums

  Live Messenger Audio call or video support

• How long to upload videos to YouTube using Windows Live Movie Maker?

  How long does it take to load a video on youtube. My video is 4 minutes, saved in an AVI file.  Live Windows saves it in another format? What is the default save?

  The processing time is within hours... What is this program anyway?

  Guide step by step on how to download a faster video to youtube. I use the AVI record and I'm not checking HD. I use a recommended selection.

  The following links may be worth a visit:

  YouTube Help Center: for starters: how to download
  http://www.Google.com/support/YouTube/bin/answer.py?hl=en&answer=57924

  How do I post videos to Windows Live Movie Maker
  http://www.YouTube.com/watch?v=L5AJk0pBFHc&feature=related
  (Post it on YouTube)

  Windows Live Movie Maker meets YouTube
  http://www.brighthub.com/multimedia/video/articles/17225.aspx

  How to put Windows Movie Maker video on YouTube?
  http://www.techburgh.com/2009/05/10/how-to-put-Windows-Movie-Maker-video-to-YouTube/

• How to stream video to the tv

  I'm trying to figure how to stream video from my slate 8 pro on my television

  If your TV is (Miracast) active wireless display, you can use the feature to display wireless on your slate 8 pro to broadcast videos of her. You can buy an adapter that adds functionality wireless to your TV high definition , if it has not already.

  

• AIR SDK 16 (and 15): video stream live stops during non - iOS iOS

  Using the sdk 15 or 16, when live video streaming via media server, if I leave iOS to iOS devices, without issue. If I'm going non - iOS device iOS device, the non - iOS device receives the video and audio fine of iOS devices, but on the iOS video device it receives freezes (almost from the beginning, after that a couple of frames, then a pause long, long gel - minutes long - and then some more images, and then freeze it, etc.)-the sound is fine It seems to be just the video. I've tested this with android to android to iOS, android android (fine), office (fine), IOS IOS (fine) (video on iOS side gel), iOS on the desktop (freezing only the side iOS).

  Hey!

  The total solution.

  I had this problem and stuck - the same situation just like the author. But it's the Air 3.5, 3.1. It works well, but is not compatible with modern IOS8-9.

  So, the solution is very simple, and it was the last thing I have left to check - why did not I do it earlier?) 2 weeks pass.

  Set the micro android SpeeX, NOT Nellymosser codec.

  
  

  Why? Who knows... but it works.

  That's all. It may be useful

• How to stream video to the host, my site using Adobe Flash Media Streaming?

  Please help me how to stream video to the host, my site using Adobe Flash Media Streaming? Using localhost and my ip I can watch streaming in my computer. How should I configure my server to watch streaming on my site?

  Help, please!

  Thank you!

  If godaddy gave me the ip address how can I use it in my video streaming, if I installed the program on my comoputer (at home) and I'm streaming from my computer on my site?

  If I can't do my public ip should I broadcast host? How it is posible. I have to install the program to my host?

  Thank you very much for your help!

• How to read the video stream directly with Flex?

  I'm trying to get Flex Builder 3 to play a video stream with Flash Media live
  Server and Flash Media Live Encoder.

  I am able to stream pre-recrorded (VSD) files in flex FLV go the Flash media server.

  I am able to stream live using Flash/FMS/Flas Live Media Encoder, but do not
  with Flex.

  This stream of video on demand flvs, but not live streams prerecorded code:

  If I change the source to 'rtmp://localhost/live/livesream.flv, I get nothing.

  What I am doing wrong?

  <? XML version = "1.0"? >
  <!--controls\videodisplay\VideoDisplayFMS.mxml-->
  "< mx:Application xmlns:mx ="http://www.adobe.com/2006/mxml">".

  < mx:HBox >
  < mx:Label text = "RTMP FMS 2.0" / >
  < mx:VideoDisplay
  autoBandWidthDetection = "false".
  source = "rtmp://localhost/vod/Legend.flv" / >
  < / mx:HBox >
  < / mx:Application >

  Oh and sorry for the double post. I didn't know there was a separate instance of the FMS.

  I use the video display component, but there is no "on-line" property. Try what setting to true. If it still does not work, try to remove the name of the stream of the .flv extension.