How to synchronize clocks on USB-6009 and USB-6343

Similar Questions

• How to synchronize the start of IT and relaxation the Scan list (DAQmx Switch)

  Hello

  I want to measure samples of N to the AI0 of Council NI PXI 4461. The measurement starts on a rising edge of a digital triggering provided to the PFI0 of the same Board. The measure is configured with samples of N/2 pretrigged. So far, everything is under control...

  Using an NI PXI 2567 Board, the signal applied at the entrance the 4461 (AI0) switches between a V2 and V1 signal. I would like to synchronize the switch between the two signals with the trigger signal applied to the input of the PFI0 Governing Council 4461. In order to obtain samples of N/2 of V1 and V2 samples N/2. Synchronization of 1 to 5 ms would suffice!

  My question is how to synchronize the start of acquisition of AI pretrigged of 4461 with the switch control given by the Council of 2567?

  Thank you in advance for your help...

  PS: the configuration of the system is:

  -LabView 8.5

  -Chassis PXI-1044

  PXI-4461 on slot 2

  Module 4-slot PXI-2567

  Hi Frederic,.

  I came back to this recently and used the following examples to run the desired synchronization.

  PXI-4461: Acq & graph tension-Int Clk - dig Start & Ref .vi

  Samples per channel = 1000

  Rate (Hz) = 10000.00

  Start the trigger Source = / [name of the instrument DAQmx] / PXI_Trig0

  Onboard start = fall

  Reference Source Trigger = DAQmx Device Name] / PXI_Trig0

  Reference edge = fall

  Trigger samples = Variable (100, 500, 900)

  PXI-2567: Switch Scaning-SW Trigger.vi

  Advance the output terminal full = / [name of the instrument DAQmx] / PXI_Trig0

  Scan list = / [name of the instrument DAQmx] / ch0-> com0.

  Scan list = / [name of the instrument DAQmx] / ch1-> com1;

  Hardware configuration:

  The PXI-2567 module controls an external relay that switches between the voltage of 5 V on ch0 and ch1 0 V.

  The PXI-4461 connects to the COM of the external relay and therefore reads 5V when ch0 is connected; 0 v when ch1 is connected.

  Procedure: The above examples are used in the following procedure.

  1. run the PXI-4461 VI.  A start trigger (falling edge) is necessary to start collecting samples before firing.

  2. launch the module, PXI - 2567 VI.  When ch0 is initially (and immediately) on com0, a trigger is sent to PXI_Trig0.  The PXI-4461 will begin to acquire samples before firing.

  3. - click on the "Connect to the next" button on the front of the PXI - 2567 VI module.  This sends a trigger to entry software for the PXI-2567 module and the transitions of the scan for ch1-> com1 list.  Once the PXI-2567 module remains (debounced), advanced complete relaxation is sent on PXI_Trig0 for the PXI-4461.  The PXI-4461 will begin to acquire samples after outbreak.

  Note: Instead of the trigger of the software entry, an external input trigger can be used (e.g. PXI_Trig1).

  Results:

  > Before instant release of samples = 100

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 500

  Delay is caused by the time of actuation of external relay.

  

  > Before instant release of samples = 900

  Delay is caused by the time of actuation of external relay.

  

  I hope that the attached screws and the explanation above helps you and/or other customers who have this problem.

  Best regards

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• How to synchronize Adobe on my iMac and Macbook Air

  Hello

  I just ordered a Macbook Air. I'll get it next week. My main goal is to make a montage LR and PS in my spare time to work and when I travel. I would like to know how I should put up the files so I don't lose the changes I make in my Macbook when I reconnect to my iMac. Is there something special I need to do? Should I keep my catalogs on Dropbox or in iCloud, for example?

  Currently I have an iMac end 2013. I keep the files on a drive external HARD, catalogues on the iMac and return them both up to TM. When a picture is how I like it, I burn it to a disc. I don't know how I should adjust my workflow using two different computers.

  Save it to a common place, probably in the cloud, in the creative space cloud or in the drop-down list. Take care to keep files up-to-date on both computers.

• Synchronization features 2 usb-6009 - please help

  Hello

  I'm trying to simultaneously capture data from 2 devices usb-6009.  I've implemented the two Renault as follows.

  1. using a function generator, generate a sine wave, which is slower and not a multiple of the sampling notes (48 kHz) and apply it on the odd numbered tracks.

  2. connect the pairs of channels on the ground.

  3. connect the PFI0 to a digital output of one of the Renault.

  4. implement each DAQ sample faster (48 kHz) as possible and trigger off the coast of PFI0 entry.

  5 generate the shutter of digital output - software write to 'Dev1/port0.

  6. read samples that result and determine the difference between each of the odd channels between the Renault in a given set sample.

  My results are not as expected.  Use Excel to plot the data, I see that the Renault 2 data are staggered on each set of sampling.

  I checked on the scope that the trigger works and that both got triggered.  I think that the configuration above is not complete and I think I need to

  Configure the two Renault to share the same clock source, but I don't know how to set up 2 Renault to share the same clock.  My questions are

  (1) exceeds my setup ok?

  (2) If you need to configure 2 Renault share the same clock, how to put in place?

  (3) is it possible sync 2 devices usb-6009?

  Thank you

  Tuan

  Your above configuration seems correct.

  The method that you use to synchronize two devices is the best you can get.  The PFI line can only read in a trigger or a counter of entry.  You cannot use to import a sample clock.  Each 6009 must use its own on-board clock.

  Typically, if you really want to sinchronize both acquisitions you must share a sampling and a trigger to start clock.  Here, we are only able to share a departure with the PFI line trigger (such as material prevents you from sharing the clock) and let the individual clocks govern the actual acquisition is simply not possible really to synchronize two 6009 s and you're doing the best you can.

  Corn

• Digital and analog inputs simultaneously - NI USB-6009 and NI USB-6212 - ANSI C

  Hello

  I'm reading at all times and at the same time analog and digital inputs. Digital and analog samples must be sampled at the same clock and acquisition should be started (triggered?) at the same time (I don't want, after some time, analog reception more digital samples - the opposite is also true).

  I found an example (in C source code) "National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Synchronization\Multi-Function\ContAI-Read dig Chan" and tried to run with two USB cards: NI USB-6009 and NI USB-6212. Unfortunately, the two results by mistake, as described below:

  DAQmx error: the requested value is not supported for this property value.
  Property: DAQmx_SampTimingType
  You asked: DAQmx_Val_SampClk
  You can select: DAQmx_Val_OnDemand

  Task name: _unnamedTask<1>

  State code:-200077
  End of the program, press the Enter key to exit

  -Is it possible sync analog and digital acquisition in the paintings?

  -If so, how?

  Thank you

  Hello tcbusatta,

  Two of these modules, USB = 6008 and USB-6212, support only timed software inputs and digital outputs.  This means that you cannot define material timing (like finished sampling or continuous) for these modules.  Digital lines can be retrieved or written once to each call DAQmx read.

  This means that you will not be able to get any type of synchronization tight between the analogue and digital channels.  You will need a Board such as the NI USB-6341 in order to synchronize the AI and DI closely.

• synchronize the outputs digital AND digital NI USB 6343 entry

  Hello

  I use NI USB 6343 to fly 1 TTL devices. This device can also produce a TTL signal to indicate if the door is opened/closed.

  I use digital Bool 1 line 1 Point. I was able to reverse the opening/closing of the door on time. But I would like to synchronize the DI and DO it right.

  I tried to throw in the clock aboard, but he failed.

  Is it possible to synchronize the DI and DOI onbaord/hardware clock?

  Any idea will be great!

  Thank you!!

  Hello

  Synchronization of your tasks of DI and shouldn't be possible with your device. You'll need them timeless has a clock that is usable by both. This information is available in the X series user manual

  http://www.NI.com/PDF/manuals/370784f.PDF
  PG 6-9 and 6-13

  You can also find information and examples of synchronization of the various tasks in the article below.
  http://www.NI.com/product-documentation/4322/en/

  Good luck

  Eric

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• OR USB-6009 and Tek TDS2024C comparesment

  My apologies if this topic was already discussed, but I searched through the forum and manuals and can't find anything.

  I have a problem with measurements in parallel with TDS2024C NI USB-6009 and Tek.

  I measured the noise high frequency on 10 s window.

  I used the data logger with a frequency of 40 kHz connection in parallel with TDS2024C (which reached 250 Hz on 10s window) and got very different results.

  On the attachment figure, first signal comes from screenshot of scope data and the second of the NI USB-6009 islogged.

  Can someone explain to me why are these so different results?

  Different sampling frequencies could easily explain it.  Try to run the USB-6009 case at the same rate as the scope and see what you get.  I also think that the TDS2024C has fewer bits in the ADC, which could also cause differences.

• Verizon blackBerry 8330 Smartphones and Outlook synchronization via a USB cable.

  I need to get a new Verizon phone that syncs with Outlook 2007 on my PC to keep my current schedule phone. I was told my Verizon support only the MOTO Q would do that unless I paid $44 / month for internet package for the 8330. This doesn't look right, it includes a data cable with the 8330. I do not have Instant Messenger or just an occasional calendar sync with my PC to internet browsing. Can someone let me know if the $44 is required?

  In addition, turn-by-turn directions works on the 8330?

  Thank you...

  Hi and welcome to the forums!

  The 8330 comes with a USB cable and desktop software that will synchronize your calendar, contacts, memos and tasks.

  It is compatible with Outlook 2007. The data services package is not required on the 8330 for these functions.

  Verizon uses the program of VZ navigator for turn-by-turn directions. It costs an extra $10-15. I tried is it's

  adequate. Note, unless you use the Vz Navigator, the GPS is locked on the phone.

  Verizon is my carrier as well.

  Please let me know if you need help!

  If not please take a minute and solve the thread by using the options on the star of the Kudo.

  Thank you!

• HOW TO SYNCHRONIZE THE MONSTER AND THE CAMERA?

  I'M TRYING TO WORK WITH CHARACTER ANIMATION. I CHOSE THE MONSTER. I SEE MYSELF ON HER CANERA, I PUT RESET POSE AND THE MONSTER DO NOT MOVE WITH MY MOVEMENTS. HOW TO SYNCHRONIZE THE MONSTER AND THE CAMERA? Thank you

  Hi Luz... You have the track selected in the timeline panel puppet? You need to target the puppet that is controlled by the webcam/microphone/keyboard/mouse by selecting its track. That it arms for registration.

• How to synchronize two chassis

  Dear all,

  I want to synchronize two chassis, chassis first has RFSG 5673E (S) and other chassis a DAMA (S) 5663E, they are connected via MXI, is there anyone who has this experience and can support me to apply it. I know that he used NI-Tclk to synchronize in a single chassis and there is another kit of tools for mult chasis, but I have no idea on how to use it!  Thanks in advance

  Best regards

  Al-Rawachy

  So I did a little research and to allow you to synchronize the two chassis together you must use a map of timing and synchronization in each frame so that you can share Tclk. This is for several reasons: first of all, as well as terminals IN CLK and CLK OUT, several PFI lines are required for the export of various signals used by T - CLK (i.e. Start, Stop and Sync triggers). In addition, the map of timing and synchronization is also necessary to replace clock background basket of 10 MHz, on the chassis of the slave with the master clock. It is essential for the two hunts reference the same clock synchronization. In addition, using a more stable clock source, as provided for in the calendar and map of synchronization, improve synchronization significantly.

  From there, a chassis are sync'd up, TCLKing la 5665 and 5673E should be simple enough. It should be simply a matter of configuration tasks the DAA and RFSG, with a single trigger configured, before feeding the two tasks of the TCLK vi. Here is an example for you to study what explains this:

  http://www.NI.com/example/30254/en/

  I hope this helps.

• Task Scheduler: how to automatically sync my USB?

  I've known the right settings to synchronize automatically my USB flash drive with the files on my computer, but I forgot. I use a synchronization and backup program called ´SyncBack´. It works fine, but I want it to run automatically whenever I put in my USB flash drive.

  I know not how to use Task Scheduler,
  I know what it takes to fill under the ´Actions´ (namely, I tell the Planner what program to run with command)
  But I Don t know what to fill under the ´Triggers´. I want she runs whenever I put in a USB drive. In my memory, he had something to do with ´event id´... and I had the name of my USB.

  Nobody can solve this one?

  Hello

  Be sure you login as ADMINISTRATOR

  Windows Vista Task Scheduler
  http://TechNet.Microsoft.com/en-us/AppCompat/aa906020.aspx

  Task Scheduler 2.0
  http://msdn.Microsoft.com/en-us/library/bb756979.aspx

  How to create a task in Vista Task Scheduler
  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  Create the event triggers in Vista Task Scheduler
  http://www.TechRepublic.com/blog/Windows-and-Office/create-custom-event-triggers-in-Vista-Task-Scheduler/

  Put the ThumbDrive in, copy a few files, then remove and check the event viewer for event ID if necessary.

  Look in the Event Viewer. This free utility makes it easy to check out though you may also check with the Windows Event Viewer.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to synchronize the complete catalogue with mobile phone

  I plan to update my old LR5 to Lightroom CC.  The idea of making all my changes and management of any of my devices is interesting for me, so I downloaded the demo to test the functionality.  I quickly discovered, however, that I can't synchronize my catalog, only the collections - and only non-smart who.  I don't know if the feature is really limiting as it sounds, or if I'm just not understand it.  So I came here for help!

  I always got my photos via a hierarchical directory... structure loosely, yyyy/mm/eventname.  If it is really only possible to synchronize collections static, all my pictures in this directory structure are prohibited to Lightroom.  It seems to me that if I want to change (or even see) my photos on my iPad and al, I need to import my photos in Lightroom, as usual and then manually maintain a collections structure that reflects the structure of my library.  Is this the case?

  Am I misunderstand how the synchronization works?  I put my catalog organized for editing with Lightroom Mobile online somehow?  Or I would be limited to only the photos that I manually maintain collections for?  (I say "would" because it is way more trouble than it is worth for me)!

  Help me get into this cloud thing!  I only 29.5 days left on my trial to find a solution!

  It is probably not enough space to put your catalogue online cloud and it would be very slow.   The synchronization process is for the initial edition more than the most recent shoot with the rest of the edition that happens on your desktop.

  I have two desktop computers and put my catalog and recent photos on a USB drive connected and who back up to another USB drive connected, in case I lost or destroy my external drive.

• How to synchronize groups of tabs between computers?

  Hello, maybe someone can finally find a solution to my problem...

  I already use FIrefox Sync option, and I love how it works. I like how it saves my bookmarks, passwords, history, etc., and it is easily accessible from my laptop.

  There is one problem that I have, that is how to synchronize groups of tabs between computers? I already know I can click "Tabs from other devices", but it will be either open them individually or you can select more than one, but in any case I see my tabs in groups. I have so many tabs and I have six groups.

  I tried to use other applications like Manager Session, tab Cloud, Session box, and they all do the same thing. They are great to save your tabs, but none of them save in groups. When I try to open all the links will open in a group.

  Does anyone know how to perfectly synchronize groups of tabs between computers? Thanks in advance.

  Hi vegsire, creating folders in bookmarks tab also is a good approach because it is much less fragile than tab groups in the session history data.