How to taskkill all the open running program using Task Scheduler?

Similar Questions

• Close a program using Task Scheduler

  How can I close a .exe program by using Task Scheduler? Eg - is the case of NetMeter, I want the program to automatically close every day at 02:00. It can b done?

  Waiting for a quick response...

  Kind regards.

  Ah I see.  Do not schedule the cmd.exe to run.  Taskkill itself is already an executable command.  So just plan sound directly in the program/script box:

  Taskkill /f /im "NetMeter.exe.
  
  
  
  
  Do not put anything in the arguments box.  When the program runs, you will briefly see to open the command prompt, the program will be completed, then the command prompt will disappear on its own.

• How to find all the firewall running on my windows pc 8

  At & t said: I have more than one firewall running. But I can only find one. Norton 360. How can I find the others? Thank you

  Hello

  Sometimes, when you set up a connection to the internet when you are running a firewall, you must go into the settings of the firewall for the application and 'ALLOW' a connection to ATT & T, for example, or IE10 to connect using AT & T.

  Some firewalls will tell you that something is trying to connect and ask for instructions.

  This doesn't always happen well. Firewall Windows would most likely allow this connection without problem.

  I'm not familiar with the operation of the new Norton stuff so I can't be much help here.

  You might try to temporarily disable the Norton Firewall and try to establish the connection and then turn it back on. If you can find how to allow the connection easily, will not be necessary.

• How to find all the controller ID: target used for the mapping of RDM on virtual machine

  I want to get a list of all the target ID used for ROW mapping on each controller.  Then next time, I can use the remaining ID of the target for RDM disk mapping using the perl script.

  I checked findVMsWithRDMs.pl but it shows an ID used target for each disc RDM. I use 5.5 ESXi servers and SDK for perl.

  Thank you

  Celine

  You will have to list all config.hardware.device devices, and then find the raw disk support type (to select the ROW).  Then look at the number of drive.  Then use it's value of controllerKey to get the controllers in config.hardware.device with the corresponding key and then get its value busNumber.  So it's busNumber:UnitNumber for the SCSI ID.

  You'll probably want to get all used SCSI identification numbers (use a hash such as BusNumber:UnitNumber-1 online).  Then you can quickly search number the first available bus.  That's what I generally find a free SCSI ID to add a new disk (including the ROW).

• How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!

  How can I recover the files and programs before a system restore?  my document folders are all empty and my programs will not open!

  I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.

  What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.

  I am a fool! I can't believe what's happening.

  Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?

  Thank you all!

  Sally in Georgia

  Looks like you did a system rather than a system restore recovery.  If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer.  Usually, a step in this recovery is to do a full format or quick of your drive.  If you did a full format, your data is permanently lost.  With a quick format, your data may still be there, somewhere but inaccessible by normal means.  Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media.  Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery.  It will be cheap and there is no guarantee.

  Impatient, remember investigate you a backup strategy for your computer and critical data.  Hard drives can go wrong with little or no warning.

  HTH,
  JW

• All my programs have gone there program default open in Word 2007 how to change all the programs back to defuault there?

  All my programs are passed to the default opening program here as Word 2007 How do I change all the acknowledgement of programs to defuault there? I uninstalled the steps and it made no difference so I reinstalled and opened. Then he did the same as before. How can I get my programs back to default here?
  This problem started as soon as I updated my Windows 7 - 32 bit - please help. :(

  Hello mattyboy1212,

  Thanks for posting on the Microsoft answers Forum.

  Try these steps and see if you can associate the default programs. If they are associated with Word, and then change them to the correct program.

  1. click Start and then click Control Panel.

  2. click on programs link.

  Note: If you see small icons or large icons in the control panel display, you will not see this link. Click on the default programs icon, and then click the link associated with a file type or Protocol with a program . Go to step 4.

  3. click on the link to Open a file in a specific program type always under default programs .

  4. in the set Associations window, scroll down until you see the file extension that you want to change the default for program.

  5. click on the extension of the file to select it, once you have found what you are looking for.

  6. click the button of change... program above the scroll bar.

  The Open with dialog box should appear.

  7. look into options for programs recommended and choose the application you want to open it with the file extension when you double-click on the particular type of the file on your computer.

  Note: Chances are, requests described under the programs recommended will be contain more programs for this type of file, but don't forget to look at the applications under other programs. You may need to click the v to expand the list of these programs.

  Note: Click Browse... to search, through your computer for any program not shown do not want to use.

  8. click OK in the Open with window. Windows 7 is going to update the list of file associations to display the new default program to open this type of file.

  9. click the button close the bottom together associations . You can also close the window of the Control Panel if it is still open.

  10. at this stage, when you double-click on any file with this particular file extension, the program you partner in step 7 will launch and load the particular file.

  Important: Program used to automatically open when these types of files have been launched will again open these types of files. To use a different program, you just need to start the program manually and then browse your computer for the file in particular.

  If please reply back and let us know if know if it helped to solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to add all the tabs open as I used to?

  How to add all the tabs open as I used to?

  You can go to bookmark all tabs by right-clicking a tab, or use the hotkey Ctrl + Shift + D

• How to print all the files in a folder without having to open each one?

  Hello

  Can someone tell me how to print all the files in a folder? I often need to print multiple files in a folder and it would allow me to save a lot of time!

  Thank you!

  I've done some testing, and it seems that Windows 7 allows print several files when they are all the same type of file.  So, for example, you can select and print 15 Word documents, but not a Word document and a single PDF document.

  To work around this limitation, you can print each file type separately.  For example, to print PDF files in a folder:

  1. Type *. PDF in the search for top-right box.
  2. For 1-15 files, press on CTRL + A to select all the.
  3. For 16 or more files, select 15 of them (click on the first, SHIFT + click the last).
  4. Click any file, and then click print .
  5. Repeat steps 3 and 4 as needed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How can I get the opening for an enlarged screen screen

  Original title: opening screen

  How can I get the opening for an enlarged screen screen

  If you are talking about an Internet Explorer page, three options.
   
  
  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.
    
   
  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
   
  
  3: IE New Window Maximizer
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html 
   
  
   
   

• How do access you the list of programs that start when you start your computer?

  How do access you the list of programs that start when you start your computer?

  Saturday, January 19, 2013 19:48:16 + 0000, Psylly wrote:

  How do access you the list of programs that start when you start your computer?

  First of all, note that you should be concerned all the programs
  starts automatically, not only those who enter in the system tray.
  Not all the programs auto-start manifesting by an icon in the
  Status bar.

  On each program, you don't want to automatically start, check its
  Options to see if he has the choice of not start (make sure you)
  Indeed choose not to run, not just a "don't show icon.
  Optional). Many can easily and better be arrested like that. If that is not
  work, run MSCONFIG from the start. Run the line, and then click the Startup tab.
  Uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do it just for the application of
  the minimum number of running programs. Despite what many people say
  You should be concerned, not with the way that a lot of these programs
  you run, but who. Some of them can degrade performance severely, but
  others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do
  is to determine what each program is, what its value is up to you which
  the performance cost is its running all the time. You can try
  Internet search and ask questions about the details here.

  Once you have this information, you can make a smart informed
  decision on what you want to keep and what you want to get rid of.
  Ken Blake, Microsoft MVP

• How can I see the list of programs that are allowed through the firewall?

  How can I see the list of programs that are allowed through the firewall?  I can't find the list.

  Open Windows Firewall and select 'allow a program or feature through Windows Firewall. You can then view or modify programs all allowed.

  Jim

• How to remove all the photos from my iphone 5?

  How to remove all the photos from my iPhone 5?

  

  1. Open the Photos app.
  2. Click on the photo or video you want to delete.
  3. Type > delete the Photo.

  Delete several photos

  

  1. Open the Photos app and press Select.
  2. Click on each photo or video that you want to remove.
  3. Type > delete Photos.

  Delete photos on your iPhone, iPad and iPod touch - Apple Support

• How to get all the icons on the desktop after installing xp

  After installation of xp only recycle bin makes its appearance. How to get all the other program on the desktop icons?

  Like internet explorer, my computer...

  Hello

  How to create a shortcut on the desktop?

  If the item is located in the start menu:

  1. click on start. The start menu appears.

  2 find the item that you want to create a shortcut. If the element is in a submenu of the menu, go to the submenu.

  3 right click on the element. A context menu is displayed.

  4. click on send to. A submenu appears.

  5. click on desktop (create shortcut). XP creates a shortcut to the item.

  _____________________________________________________________________________

  Here is the vista forums

  Try the xp forums at the below link for any other question of XP

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Not sure how to display all the applications that I'm supposed to have with the creative cloud - constant spin in the window? [was: creative cloud]

  Trying to download my creative cloud, but get a constant rotation in the window. Not sure how to display all the applications that I'm supposed to have with the creative cloud?

  Please visit: App does not open. Wheel of progress turn continuously

  I hope this helps.

  Concerning

  Megha Rawat

• How to prevent all compositions opening at startup

  Hi guys,.

  Anyway, my question is probably simple to answer, but here goes: how to stop all the compositions of 'openness' automatically when I first start After Effects? I hope that makes sense? I looked online for a solution, but no luck.

  Thank you very much

  Shannon

  Reset your workspace and close any comp points, i.e. viewers and timelines.

  Mylenium