How to test a form hosted in Eloqua?

Similar Questions

• How to test an ESX host

  What are the options for testing performance on ESX hosts?  Are there models of good OVF or vApps for ESX hosts test to determine their ability to stress?  For example, you want to determine how many virtual machines can run safely on a physical machine - is there an OVF template that will peg the CPU, memory usage usage and access hard drive at startup that you run a bunch of one host and one model OVF who will report on the usage statistics?

  Are there other (free) ways to stress tests of your physical servers?

  Thanks for your comments

  VMware VMmark

• Accommodation Eloqua forms on non-Eloqua hosted LP

  Hello

  We have a proof of concept working where we organize an Eloqua form on our website (not iframe / no repost).  We have a complex JavaScript solution to manage research data to support a progressive profile tiered implementation.  The data being captured and presented in the form are collected in Eloqua as expected.  We don't find any problems with this type of configuration, but have heard isn't possible and shouldn't be done.  In addition, we were not able to find any documentation on Topliners to do this type of configuration.

  Are there reasons why he shouldn't do this type of configuration?  We do not want to host our own form and then repost to Eloqua, and we want to use an Eloqua hosted LP and form together.  Also, we don't like the idea of using an iframe to host the Eloqua LP and shape. We are a global company and have noticed that the pages hosted Eloqua and even claims to take 1-2 minutes to load in the APAC countries, especially China and the India.  Certainly not a good user experience.

  Thank you very much

  James

  I'm sure you're fine. In other words, the configuration you describe seems reasonable to me and I'm not aware of any insurmountable problems with it. You want if ensure you treat cookies and GUIDS properly, so you're probably, but test on some use cases to make cookies to work correctly.

  I have tried several variations on this setup and had no problem.

  Who told you that bad? They gave reasons?

  There might not be a lot of documentation for this particular configuration, but my script Pro Progress (Progress Pro - Progressive by profiling Eloqua 10 advanced Javascript) is designed to be used in a context similar (he manages the progressives like you do profiling) and a number of users have been able to implement successfully.

• How to test if the pc is connected to the TCP/IP protocol?

  Hello

  I have a VI how should the data received from another PC, using a TCP/IP connection.

  My VI could connect, receive data, but if I lose the connection im not able to reconnect, because I do not know how to test if my pc is connected to the other.

  Thank you for your help,

  Best regards

  salim_mjs wrote:

  Hey,.

  I was checking for error 66, I think that it check if the connection has been closed in order to reconnect

  do you not think that the error 56 or 60 are better?

  with respect,

  56 is the time-out. This will depend on your remote service if this should be considered as error or ignored. If it is a server application, it should certainly be able to respond within the time limit. But if your host application is the server and the remote application is the client it is very common to receive a time-out error when querying the client if it has new data to send.

  Order the examples mentioned previously, they really give you a good idea on how TCP/IP network communication must all work, even if there is still a lot to improve to create a truly reliable connection. But start from there come back if you get into trouble.

  Rolf Kalbermatter

• my e-mail address is showing that Charter is not a host, so I can't send mail! How can I find the host in order to use my mail or to change?

  How can I find my host for my email?

  1. What email program are you using?
  2. Who is your mail server? (Which is after the @ in your address).
  3. What happens if you try to send a test message?
  4. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• How to power on ESXi host to vCenter?

  Hi all

  There is possibility of power on a host on a web client vSphere, but by some reason, it is grayed out and is not available.

  

  On the screenshot host runs but it's the same then its engine off.

  Details:

  vSphere Update 1 v6.0

  Host: Dell PowerEdge R710.

  iDRAC is configured.

  IPMI settings for power management is set up. (But do not know how to test for in vCenter actually)

  Host is running on a trial license, so all features is available.

  Clues?

  See you soon,.

  Alex.

  Hi Alex,

  belong to these hosts in a cluster, and you have enabled Power Management in settings of DRS of the pole?

  Update: looks like it is available only when the host is part of a cluster, but the cluster didn't necessarily need to have DRS and enabled power management.

  -Andreas

• How to test the USB on Satellite Pro C870 speed?

  Hello

  Please I have connect WD item 10 B 8 USB drive to plug 750Go BLUE.
  Please how can test if USB3 uses full speed or lower connection USB2 bus?
  Brand of disk Crystal 3.03 said 31 MB/s reading and writing! (too low for USB3!)

  Thank you

  Hello

  You can use some freeware like tools
  -H2testw
  -Drive the speed Test 3.2
  I used the H2testw to SD card check and test USB memory stick and I was satisfied.

• How to test a motherboard for fualts?

  Looking for means test a Toshiba Satellite L20/L25 for fualts. How to test to see if it has a graphics chip fail or its ram reading high because it sounds like the RAM fail if I go out and if I put it in it beeps once like it wants to start

  As far as I know that it can be tested using diagnostic tools special but these tools are not for public use and are designed by Toshiba to only service providers.

  Have you tested different RAM modules?

• How to test the audio and the video on Android

  How to test audio and video on Android?

  How it is checked when installing Skype on Android?

  What I'm asking, is available in the desktop version to Tools-> Options-> Audio settings, and Tools-> Options-> video settings. And is checked during the installation of Skype for desktop PC as Configure Skype / check your audio and video files.

  (Of course I searched the whole Skype app and found no.) I have the echo service by my microphone is weak, I am lost.)

  Thank you.

  Sign in to your ID on Skype desktop and call your android phone to test

  It's something is broken, there is not that you can do, other than downgrading to an older version. There are also a couple of settings to activate the camera and photo qualityin settings in some versions.

• How to test profibus is set up correctly?

  I profibus card installed in a PC.

  the pc is not installed LabVIEW. only testStand.

  purpose of this PC is like test panel for the execution of the TestStand test scenarios and this PC will be connected to the IO.

  How can test the profibus if there is no installed Labview?

  The vendor of your device must provide you with the GSD file. Each peripheral support profibus usually come with a GSD file.

• "NaN" - how to test in VBAI <>- BT?

  I use VBAI to measure the length of a line.

  I use LabVIEW as the custom interface.

  In VBAI, I use "Update of Inspection" to send the data of length to LV

  How can I check in vi, that this figure is "NaN? This will happen when the line is not found.

  I tried to use ' NaN/path/RefNum"of the LV, but it simply doesn't.

  Help please...

  I don't know how you test this. I tried it and it works fine. Make sure the update of Inspection stage has the flag to 'Run the VI after update of the indicators'.

  If she still doesn't for you, let me know and I can send you a simple example (if you need an example, let me know what version of the VBAI you are using).

  Thank you

  Brad

• How to test the domain controller security policy works or not?

  How to test the domain controller security policy works or not?

  So far, I put a security policy in the domain controller security policy, however, I do not affect client computers joined to the domain controller. and so far, if I apply the domain security policy work.

  LiuAlex

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home

• How to test the object lost focus?

  How that test an object lost focus?

  Van you listen to the accent of the event

• How to test the backlight of the Simulator

  Hello Guyz

  Im kind again in the development of blackberry so its more than a new hobby as I recently an interest in java.  So my first app is an attempt to make an application which the camera back given the fon. so I would like to know how to test, without the need to put it on my son, how do I know if d backlight is turned on or off, is the way to display the interface back to the Simulator or something. I'm using eclipse and the blackberry 9800 torch Simulator. How to test the light from my pc?

  Thanks for your time, im hoping a response. Take advantage of the UL

  You can't test the flash of the camera in the BlackBerry smartphone Simulator.  You will need to test this on a real Smartphone BlackBerry.

• How to test the implementation on 9670

  How to test my BlackBerry 6.0 application that will look good on the screen 9670's 360 x 400?  I don't see how to configure the size of the screen of the Simulator.  (fledge.exe / Pocket = 9670 does not work)

  The application uses 6.0 features, so I can't just run it on a Simulator 5.0 with a screen 360 x 400.

  Thank you

  Zack

  You will need to download the BlackBerry Style 9670 Simulator.  You can download it here: http://na.blackberry.com/eng/developers/resources/simulators.jsp