"NaN" - how to test in VBAI <>- BT?

Similar Questions

• How to test the USB on Satellite Pro C870 speed?

  Hello

  Please I have connect WD item 10 B 8 USB drive to plug 750Go BLUE.
  Please how can test if USB3 uses full speed or lower connection USB2 bus?
  Brand of disk Crystal 3.03 said 31 MB/s reading and writing! (too low for USB3!)

  Thank you

  Hello

  You can use some freeware like tools
  -H2testw
  -Drive the speed Test 3.2
  I used the H2testw to SD card check and test USB memory stick and I was satisfied.

• How to test a motherboard for fualts?

  Looking for means test a Toshiba Satellite L20/L25 for fualts. How to test to see if it has a graphics chip fail or its ram reading high because it sounds like the RAM fail if I go out and if I put it in it beeps once like it wants to start

  As far as I know that it can be tested using diagnostic tools special but these tools are not for public use and are designed by Toshiba to only service providers.

  Have you tested different RAM modules?

• How to test the audio and the video on Android

  How to test audio and video on Android?

  How it is checked when installing Skype on Android?

  What I'm asking, is available in the desktop version to Tools-> Options-> Audio settings, and Tools-> Options-> video settings. And is checked during the installation of Skype for desktop PC as Configure Skype / check your audio and video files.

  (Of course I searched the whole Skype app and found no.) I have the echo service by my microphone is weak, I am lost.)

  Thank you.

  Sign in to your ID on Skype desktop and call your android phone to test

  It's something is broken, there is not that you can do, other than downgrading to an older version. There are also a couple of settings to activate the camera and photo qualityin settings in some versions.

• How to test profibus is set up correctly?

  I profibus card installed in a PC.

  the pc is not installed LabVIEW. only testStand.

  purpose of this PC is like test panel for the execution of the TestStand test scenarios and this PC will be connected to the IO.

  How can test the profibus if there is no installed Labview?

  The vendor of your device must provide you with the GSD file. Each peripheral support profibus usually come with a GSD file.

• How to test if the pc is connected to the TCP/IP protocol?

  Hello

  I have a VI how should the data received from another PC, using a TCP/IP connection.

  My VI could connect, receive data, but if I lose the connection im not able to reconnect, because I do not know how to test if my pc is connected to the other.

  Thank you for your help,

  Best regards

  salim_mjs wrote:

  Hey,.

  I was checking for error 66, I think that it check if the connection has been closed in order to reconnect

  do you not think that the error 56 or 60 are better?

  with respect,

  56 is the time-out. This will depend on your remote service if this should be considered as error or ignored. If it is a server application, it should certainly be able to respond within the time limit. But if your host application is the server and the remote application is the client it is very common to receive a time-out error when querying the client if it has new data to send.

  Order the examples mentioned previously, they really give you a good idea on how TCP/IP network communication must all work, even if there is still a lot to improve to create a truly reliable connection. But start from there come back if you get into trouble.

  Rolf Kalbermatter

• How to test the domain controller security policy works or not?

  How to test the domain controller security policy works or not?

  So far, I put a security policy in the domain controller security policy, however, I do not affect client computers joined to the domain controller. and so far, if I apply the domain security policy work.

  LiuAlex

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home

• How to test the object lost focus?

  How that test an object lost focus?

  Van you listen to the accent of the event

• How to test the backlight of the Simulator

  Hello Guyz

  Im kind again in the development of blackberry so its more than a new hobby as I recently an interest in java.  So my first app is an attempt to make an application which the camera back given the fon. so I would like to know how to test, without the need to put it on my son, how do I know if d backlight is turned on or off, is the way to display the interface back to the Simulator or something. I'm using eclipse and the blackberry 9800 torch Simulator. How to test the light from my pc?

  Thanks for your time, im hoping a response. Take advantage of the UL

  You can't test the flash of the camera in the BlackBerry smartphone Simulator.  You will need to test this on a real Smartphone BlackBerry.

• How to test the implementation on 9670

  How to test my BlackBerry 6.0 application that will look good on the screen 9670's 360 x 400?  I don't see how to configure the size of the screen of the Simulator.  (fledge.exe / Pocket = 9670 does not work)

  The application uses 6.0 features, so I can't just run it on a Simulator 5.0 with a screen 360 x 400.

  Thank you

  Zack

  You will need to download the BlackBerry Style 9670 Simulator.  You can download it here: http://na.blackberry.com/eng/developers/resources/simulators.jsp

• How to test the context menu bbui.js in ripple?

  IM using bbui.js v0.9.4 and ripple v0.9.10. How to test the context to the ripple manu? When I run the app on DevAlpha long press peek list context menu img, but how to do this in ripple?

  I managed to understand. You must click and hold on the edge/edge of the list of img to get the img to peep context menu. By clicking on the list of img don't peep the context menu.

• How to test moduleDeletionsPending, in the Simulator, I don't have the option to remove my application

  How to test the following?

  I want to test the functionality by using the method public void moduleDeletionsPending (String [] moduleNames). I had written logic that removes files from an SD card and it works when I call a menu inside my application item.

  However, it should only be run when I uninstall the application.

  In 9700 Simulator, if I select Options > Applications > [highlight the application] > [open the menu by pressing the Insert key on my keyboard] - I don't see the option to remove the application.

  I don't see the delete option for other applications, such as the Klondike card game.

  Should I set a property or the permissions of my app should be deleted in a simulator, so I can test the moduleDeletionsPending method?

  Thank you.

  You will need to 'install' the app in the BlackBerry smartphone Simulator so that your application appear in the list of applications.  You won't see here when you perform an execution/debug as, when you use the file, the option of loading or copy it into the directory of Simulator.

  The following link explains the different ways to install an application.

  How to deploy and distribute Applications

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/how-to-deploy-and-distribute-Applicati...

  Note that you can install using a simulated so USB connection.  Click on the menu of the smartphone Simulator simulation BlackBerry and check USB cable connected.  Note that you can not the debugger attached when installing via a simulated USB connection.

• Z3 has the awkward resolution - how to test my apps

  If the specifications are on:

  http://ID.BlackBerry.com/smartphones/BlackBerry-Z3-en/specifications.html

  and it seems in fact z3 will resolution 540 x 960.

  I know that stunts with QML containers should evolve to the correct resolution, but there are cases where the particle size fine precision is required which depends on app knowing what resolution it is running on.

  In our applications, we have several places where you have to adjust things according to the resolution.

  Our question is how to test our applications on Z3 BEFORE start up users download applications potentially complain interface user works not properly?

  I just checked the Simulator and the version posted on the website of the developers is Dec 2013 which I suppose doesn't have resolution Z3.

  Thank you

  Here's the answer: nothing to do for the resolution of different

  http://devBlog.BlackBerry.com/2014/04/the-BlackBerry-Z3-developer-specs/

  only if you rely on sensors, there is a difference:

  No NFC sensor, magnetometer or Gyroscope

• How to test DTMF to the unit

  How to test the sequience DTMF #X #2 in the unit. I have personal assistant on the system and when I send voive mail it says "I don't recognize that as a valid entry" unit is integrated with Domino.

  If you're component unit, pending so that he could respond and then entering DTMF? OK, so you don't need the leader ' # ' in your string to it. Assuming you get the opening greeting with your call, you can simply dial the extension of the user followed by #2 on turn the transfer rule.

  You can check what DTMF is entered and how the conversation flies with the Port status monitor tool that you will find in the depot of tools on your desktop - it must be reasonably obvious how the flow goes in looking at the output from that on a test call.

• How to test the change of direction on the Simulator event?

  There is an example of change orientation Guide 0.92 development event.

  I add some codes for my application to deal with this event, but I don't know how to test it.

  I find that the return value of Accelerometer.isSupported on the device Simulator is true and simulator of funds, the value is false. But two of them cannot Simulator such an event.

  I know that you can test on IPhone simulator, use of change of direction "Command" + arrow keys.

  Can anyone help?

  Thank you.

  To test or change the orientation of the Simulator make sure that your using the last image of Simulator, then slide upward from the bottom right. (Not of the bezel, instead of part of the screen visible)