How to test GPU of my notebook for physical damage

I was wondering which option to choose from the menu to start diagnostic system uefi actually detect any potential physical damage to my laptop on board the GPU chip model: pavilion dv7 - 3178 ca

Hello

Normally the starting test will test all the components of the device

Also, I found this link that can help you and have more data :

http://support.HP.com/us-en/document/c01443317

Tags: Notebooks

Similar Questions

  • How to test the "otherAttributes' in SOA for a WSConnector?

    Hi all

    How can I test "otherAttributes' to SOA for a WS connector (create operation)? This field is singleValuedAttributeArray and I don't know which form to use to add here two attributes custom as GenericID with value for example "11111111".

    TestWSConnector.png

    Thank you for your help.

    Milan

    Ok

    I found how to

    I need to extend the 'Type' and then I could see more I typed here number 2 of my custom attributes and push the button of size for the table refresh.

    m.

  • How long does the system recovery take for lost/damaged files?

    I have a PC Compaq Presario SR5710F & have lost or damaged Windows install & maybe other files system as well.   (Win Update, etc. won't work without him).  How long does a system recovery takes to get with my 3 discs that I did on purchse from my pc?  Thank you!

    Three disk might take an hour or less but if you have hardware problems like bad memory, HDD, DVD, power recovery discs provide or bad capacitors, etc. it may never end.

  • How to test a motherboard for fualts?

    Looking for means test a Toshiba Satellite L20/L25 for fualts. How to test to see if it has a graphics chip fail or its ram reading high because it sounds like the RAM fail if I go out and if I put it in it beeps once like it wants to start

    As far as I know that it can be tested using diagnostic tools special but these tools are not for public use and are designed by Toshiba to only service providers.

    Have you tested different RAM modules?

  • How can I get the color codes for the notebook

    How can I get the color codes for the notebook?

    Hello

    What is the color codes for the notebook?

    Perhaps you need a 3rd party utility like GetDiz - Free and others to be
    found using BING or Google.

    GetDiz Notepad - free - replacement
    http://www.Outertech.com/en/Notepad-replacement

    I hope this helps.

  • How can I order a recovery media for HP Pavilion dv9810us Notebook?

    How can I order a recovery media for a HP Pavilion dv9810us Entertainment Notebook PC? I'm following the documentation that was provided with my PC when I bought it several years ago. I can still these discs?

    Hello

    Although the set of recovery disks is no longer available at HP, you can always order them the re-seller 3rd party on the following link.

    http://www.computersurgeons.com/p-15623-recovery-kit-483904-002-for-HP-model-number-dv9810us.aspx

    Kind regards

    DP - K

  • I ordered Creative Cloud student 3 days, but always my order is on hold and my license is wile test I've already paid for the license. Is this normal? How long should I wait?

    I ordered Creative Cloud student 3 days, but always my order is on hold and my license is wile test I've already paid for the license. Is this normal? How long should I wait?

    Hi omar abdallah,.

    Please see:

    https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

    Let us know if that helps.

    Concerning

    Megha Rawat

  • Recently, I'm subscribed to Acrobat XI after the test expired, but when I went to turn it on I was asked for the serial number. I don't have the order number on the invoice. How can I get the serial number for the trial software that is on my computer?

    Recently, I'm subscribed to Acrobat XI after the test expired, but when I went to turn it on I was asked for the serial number. I don't have the order number on the invoice. How can I get the serial number for the trial software that is on my computer?

    Hi Kenneth,

    Subscription does not have any serial number. Please use your Adobe ID to update the licensed software.

    Kind regards

    Rave

  • How to test the USB on Satellite Pro C870 speed?

    Hello

    Please I have connect WD item 10 B 8 USB drive to plug 750Go BLUE.
    Please how can test if USB3 uses full speed or lower connection USB2 bus?
    Brand of disk Crystal 3.03 said 31 MB/s reading and writing! (too low for USB3!)

    Thank you

    Hello

    You can use some freeware like tools
    -H2testw
    -Drive the speed Test 3.2
    I used the H2testw to SD card check and test USB memory stick and I was satisfied.

  • How can I check the disc for physical integrity on Satellite P305?

    I have P305-S8838.

    I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
    Now, I have a few more crash but don't know if it's a physical disk problem.

    For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

    I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

    Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

    I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

    I ran the test of memory OK.

    I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

    This didn't stop me to use the computer, but its all irritating.

    How can I check the disc for physical integrity?

    Bob

    Hello

    He idea goo to check the HARD disk and run some diagnostic procedures.
    For this, I recommend the freeware tool called Drive Fitness Test.
    It allows you to check the HARD disk for certain physical defects.

    Google for this tool. You can get it from multiple pages download

  • How to test the audio and the video on Android

    How to test audio and video on Android?

    How it is checked when installing Skype on Android?

    What I'm asking, is available in the desktop version to Tools-> Options-> Audio settings, and Tools-> Options-> video settings. And is checked during the installation of Skype for desktop PC as Configure Skype / check your audio and video files.

    (Of course I searched the whole Skype app and found no.) I have the echo service by my microphone is weak, I am lost.)

    Thank you.

    Sign in to your ID on Skype desktop and call your android phone to test

    It's something is broken, there is not that you can do, other than downgrading to an older version. There are also a couple of settings to activate the camera and photo qualityin settings in some versions.

  • How to test profibus is set up correctly?

    I profibus card installed in a PC.

    the pc is not installed LabVIEW. only testStand.

    purpose of this PC is like test panel for the execution of the TestStand test scenarios and this PC will be connected to the IO.

    How can test the profibus if there is no installed Labview?

    The vendor of your device must provide you with the GSD file. Each peripheral support profibus usually come with a GSD file.

  • "NaN" - how to test in VBAI <>- BT?

    I use VBAI to measure the length of a line.

    I use LabVIEW as the custom interface.

    In VBAI, I use "Update of Inspection" to send the data of length to LV

    How can I check in vi, that this figure is "NaN? This will happen when the line is not found.

    I tried to use ' NaN/path/RefNum"of the LV, but it simply doesn't.

    Help please...

    I don't know how you test this. I tried it and it works fine. Make sure the update of Inspection stage has the flag to 'Run the VI after update of the indicators'.

    If she still doesn't for you, let me know and I can send you a simple example (if you need an example, let me know what version of the VBAI you are using).

    Thank you

    Brad

  • How to test if the pc is connected to the TCP/IP protocol?

    Hello

    I have a VI how should the data received from another PC, using a TCP/IP connection.

    My VI could connect, receive data, but if I lose the connection im not able to reconnect, because I do not know how to test if my pc is connected to the other.

    Thank you for your help,

    Best regards

    salim_mjs wrote:

    Hey,.

    I was checking for error 66, I think that it check if the connection has been closed in order to reconnect

    do you not think that the error 56 or 60 are better?

    with respect,

    56 is the time-out. This will depend on your remote service if this should be considered as error or ignored. If it is a server application, it should certainly be able to respond within the time limit. But if your host application is the server and the remote application is the client it is very common to receive a time-out error when querying the client if it has new data to send.

    Order the examples mentioned previously, they really give you a good idea on how TCP/IP network communication must all work, even if there is still a lot to improve to create a truly reliable connection. But start from there come back if you get into trouble.

    Rolf Kalbermatter

  • HP becomes new GPU drivers and Catalyst™ for ATI 7690 m XT mobile any time soon?

    I recently bought Pavilion DV7 with Quad processor i7, 8 GB ram and ATI 7690 m XT (2 GB) GPU (with swichable GPU Intel)

    On paper, it takes a monster (better than AlienWare) game machine but the GPU is slowed down by the other Jurassic GPU software support old Catalyst software.

    The catalyst used for this particular GPU is the catalyst for 2010 (which was fundamentally changed to support the new graphics)

    ATI mentions even this new 7690 m XT on their website alone while a real up - driver support date. !!!

    The 7690 m XT should have no problem to start Batman Arkham Asylum or City™ but it doesn't...

    It behaves like my old Toshiba with Nvidia GT330M graphics processor... (what is shameful)

    Ideas or the rummors of HP in fact ask ATI to provide new drivers? or are we stuck with 1000eur machine with graphics driver 3 years?

    http://h30434.www3.HP.com/T5/notebook-display-and-video/to-all-7690m-XT-laptop-users-please-post-to-show-HP-we-want-A/TD-p/1461177

Maybe you are looking for