How to test if ODAC112030Xcopy_x64 was installed corectly?

Similar Questions

• How confirm BB10 Air SDK was installed in flash builder 4.6

  I just downloaded and installed what I think is the BB10 'or' Air SDK from here

  https://developer.BlackBerry.com/air/download/

  When I create a new mobile project with flash builder 4.6, the default descriptor bar is the same as the playbook we.

  for example, this commented out line:

  I was wondering if I failed somewhere along the way and always use the Tablet SDK or if it looks just like that

  -edit-

  also, I need new signature for BB10 keys or can I use everything that exists from a previous installation of the playbook.

  Guess which has not been updated. New BB10 method is:
  
  Assets/Splash.jpg
  

  Each image in the list is of a size to use for the device in landscape and portrait. It will automatically detect and use the correct start depending on the size of the device screen.

  Same key signature as with the PlayBook.

• How best test which Member was chosen in a run-time prompt?

  It is elementary that to some, but it seems to reinvent the wheel every time on this.  Test @ISMBR does not work for me.  I want to run a calculation against a given Sparse member selected in a run-time prompt, but the calculation is conditional that the selected member is.  I can't make it work.  I can't get a real happening on the Boolean test.

  
  Difficulty (run time prompted sparse Member Variable)

  Period or dense account member)

  IF (@ISMBR (this sparse Member who was chosen))

  This;

  ELSE IF (@ISMBR (this sparse Member who was chosen))

  Do;

  ON THE OTHER

  Do something else;

  ENDIF

  );

  ENDFIX

  Your fixation on RTP and then using IF (@ISMBR ()) on the RTP is not the problem. I'm watching a BR I wrote exactly that.

  In my case, I didn't need to worry about creating block. (If there is a value in BEGBALANCE, I spread over the periods).

  BTW, I started this BR using @CURRMBR in the IF statement and changed to @ISMBR because @CURRMBR did not work.

  You're not exactly what 'Doing' is in your case I can only speculate that you try to do something on a block that does not exist, and the creation of block within an IF statement is not always reliable. (I try not to do it because I can never remember "use cases" when it won't work)

  Good luck

  Robert

• How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

  Hello guys,.

  I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).

  During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.

  I used this command to get the following result:

  # vmware - v

  VMware ESX Server 3i 3.5.0 build-207095

  ... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?

  If this is not the case, how should I do to update? What is the KB # I should download?

  I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.

  Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.

  Also...

  # esxupdate query

  <? XML version = "1.0"? >

  <>request-response

  < installed packages >

  < package ID = "ESX-207095" >

  firmware < name > < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < package ID = "ESX-CLIENT-204907" >

  < name > viclient < / name >

  < version > 2.5.0 < / version >

  < rel > 204907 < / rel >

  < / packages >

  < package ID = "ESX-TOOLS-207095" >

  < name > tools < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < / packages installed >

  < / request-response >

  # /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG

  ... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

  Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

• good day my computer was stolen and I don't know how do I recovered my photoshop, it was installed in line I have and I have payment thank you very much.

  good day my computer was stolen and I don't know how do I recovered my photoshop, it was installed in line I have and I have payment thank you very much.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  The PC is an installation of Windows 7 Professional 64 b NL.

  Hi,

  The downgrade isn't possible for customers Volume of the former traditional products... license for individual buyers.

  Kind regards

  Sheena

• How to test 1 RAID works or not?

  Hi all

  I ask how to test that my installed Raid 1 and good work?

  And whether or not I use OMSA, how which?

  I have been testing it to disconnect a hard drive and work with only one and it worked.

  After I plugged the other with the first was missing and I make rebuilding, now are online and working. But to be sure?

  Thank you

  Hello

  With regard to your tweet on twitter, I answered your inquiry. Check it out. Let me know.

• How to test the USB on Satellite Pro C870 speed?

  Hello

  Please I have connect WD item 10 B 8 USB drive to plug 750Go BLUE.
  Please how can test if USB3 uses full speed or lower connection USB2 bus?
  Brand of disk Crystal 3.03 said 31 MB/s reading and writing! (too low for USB3!)

  Thank you

  Hello

  You can use some freeware like tools
  -H2testw
  -Drive the speed Test 3.2
  I used the H2testw to SD card check and test USB memory stick and I was satisfied.

• How to test the audio and the video on Android

  How to test audio and video on Android?

  How it is checked when installing Skype on Android?

  What I'm asking, is available in the desktop version to Tools-> Options-> Audio settings, and Tools-> Options-> video settings. And is checked during the installation of Skype for desktop PC as Configure Skype / check your audio and video files.

  (Of course I searched the whole Skype app and found no.) I have the echo service by my microphone is weak, I am lost.)

  Thank you.

  Sign in to your ID on Skype desktop and call your android phone to test

  It's something is broken, there is not that you can do, other than downgrading to an older version. There are also a couple of settings to activate the camera and photo qualityin settings in some versions.

• How to test profibus is set up correctly?

  I profibus card installed in a PC.

  the pc is not installed LabVIEW. only testStand.

  purpose of this PC is like test panel for the execution of the TestStand test scenarios and this PC will be connected to the IO.

  How can test the profibus if there is no installed Labview?

  The vendor of your device must provide you with the GSD file. Each peripheral support profibus usually come with a GSD file.

• How to test if the pc is connected to the TCP/IP protocol?

  Hello

  I have a VI how should the data received from another PC, using a TCP/IP connection.

  My VI could connect, receive data, but if I lose the connection im not able to reconnect, because I do not know how to test if my pc is connected to the other.

  Thank you for your help,

  Best regards

  salim_mjs wrote:

  Hey,.

  I was checking for error 66, I think that it check if the connection has been closed in order to reconnect

  do you not think that the error 56 or 60 are better?

  with respect,

  56 is the time-out. This will depend on your remote service if this should be considered as error or ignored. If it is a server application, it should certainly be able to respond within the time limit. But if your host application is the server and the remote application is the client it is very common to receive a time-out error when querying the client if it has new data to send.

  Order the examples mentioned previously, they really give you a good idea on how TCP/IP network communication must all work, even if there is still a lot to improve to create a truly reliable connection. But start from there come back if you get into trouble.

  Rolf Kalbermatter

• How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  original title: operating system

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  If the installation provided with your Windows computer discs was preinstalled on the computer - it is OEM and cannot be moved. You can move Windows to another computer if you buy the retail version.

  You can move the windows on a new computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade the new Windows computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

• How can I download and re-install Outlook Express 6 in Windows XP?

  I have MS Office 2003 is installed (Windows XP).  Outlook Express was installed from website when I couldn't get the original version to import e-mail.  I need to uninstall OE 6. now that OE2003 works.  How do I do that?

  original title: uninstall OE 6

  You do not uninstall OE, it's part of Windows.  You can simply not use and you can make Outlook default under control panel | Internet Options | Programs.

  Steve

• I bought a laptop and did not receive a CD or DVD with the product key. How can I get one and install?

  I bought a laptop from HP 2000 but did not receive a CD/DVD with product key.  How can I get one and install?

  Where did you buy it? Had it already installed Windows? It was used? New?

• Ask Windows Update to install the Vista SP2, which was installed years ago and won't let me install Live Essentials for the same reason.

  Windows Update is now always ask to install the Vista SP2, which was installed years ago. When you try to install through Windows Update, it concludes the installation like ok, then once again it shows in Windows Update. When I try via stand-alone, it is said that SP1 is not installed. Of course, it is. In any case tried to reinstall and he wrote is already installed. I'm sure I installed both SPS long ago, but none of them show in the updates installed. It's probably something in the registry. Properties system shows SP1. Ah, I use Vista Home Premium 32-bit.

  Hello

  Thank you for your response.

  -What program did you use to increase performance?

  I suggest you please uninstall service pack 1, and then install both service packs.

  Method 1: Please follow the steps described in the article, and check if that helps.

  Note: I would recommend the first backup your information and other files External drive and perform operations.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  Method 2: Installation of Service pack 1 and service pack 2.

  Windows Vista Service Pack 1 all language standalone (KB936330)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages (KB948465)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15278

  For more information, please visit the links:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know if it helps!