How to track with overlays? AKA followed by movement

Similar Questions

• Tracker mask doesn't follow the movement

  Hello.

  After 14 effects using, I want to hide a moving person in my shot (the camera is stationary), but hide manually (point by point, frame by frame) is a lot of work and track movement does not really work. The problem is that I need to cut the person accurately, but all means of monitoring, I tried were too loose, does not follow the person correctly or has worked better than expected, but just for the face.

  An image says is attached

  I already thank you for your help.

  Sincere greetings,

  

  I fear that you are looking at Rotoscoping.  There is no way to do this without a lot of work.

  You could start with tutorials on the rotobrush, like this tool: Adobe after effects CS5-rotoscope with Rotobrush - YouTube

• How export a project consisting of 2 video tracks with many clips/effects and 1 stereo audio track so that the project can be worked into another compatible editing system?

  How do I export a project composed of 2 video tracks with many clips/effects more 1 stereo audio followed that project ACR is still worked in a

  
  

  compatible mounting system? Thank you!!

  When you export, you create a new video file that will have effects applied... in other words, a book finished

  Of course, this video 'complete' may be edited by someone else on another computer... but it SEEMS to me that what you want is for someone to take your editing, continue editing, THEN export a finished video

  Is this correct?

  If so, do some reading in the help file on the Manager project, so you can put your project and all files on an external drive to give to any other person

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• Rotating table with 6 test stations. How to track the results data at each station to a machine of rotating table with 6 test stations?

  I would like to know if someone has worked with table Rotary testsystems and want to share an idea of how he dealt with follow-up of the results of each test result data in all the test station is in the table of rotation, so at the end of the cycle the results of good data by each DUT. There's a kind of technique used in arrays or clusters?

  Any comments would be grateful.

  Hi shada

  There are many ways that you can store your results, such as Matthew commented that you can use an array of Clusters. I would recommend this table of cluster storage in a Global Variable that is functional to make data transfer safer and easier to climb. There are many examples on how to use them on the community.

  There are a few tools in advance that you can also use to store your results as Of present value Tables (CVT).

  TestStand parallel model with the "Result of processing" option enabled stores automatically all the results of your Tests.

  Hope this information is useful.

• How to track my order?

  When I ordered my laptop satellite, told me to register on the site to be able to check the status of my order. When I tried to sign up, he said that registration has not been available since 2009. Ive looked elsewhere including here: https://www.toshibadirect.com/td/b2c/osDetail.jsp which is just another Web site that I have no connection. I have an email with an order number, but no customer number or anything like that. The site is absolutely silly.

  How to track my order?

  Hello

  Where did you order the laptop?
  The link provided in your message points to the Toshiba page we.
  This page has nothing to with Toshiba European page and I think it's the reasons why you can't follow the serial numbers of the European models for Toshiba laptop.

• Saving AVI with overlay... slow... no work around?

  Hello

  I couldn't find clear answers so I'll just ask here

  My application should do the following:

  1 - Take a picture of the camera

  2. Add the overlay (overlay consists of dynamic elements)

  3. view image in an external window w/overlay

  4 - Save AVI with overlay

  The most important thing is that the external window showing the overlay and the picture has a high refresh rate. Here's the code for that: (wow it's pretty huge...) I'm sorry about that.,.)

  

  First of all, it captures an image of the camera. This grab function removes all overlay that was there before (blaeh.). Second, a manifest error is used (Im lazy and did not include errorhandling.. yet), third, every 200ms (the loop runs at 20 ms) dynamic overlay items are updated on my own overlay image. The reason why I use a clean to the overlay image, it is I want to minimize the redefinition of the static elements on the overlay. Fourth - copy the overlay of my image of static overlay to the image captures. Fifth - display the image in an external window. Sixth - set reference IMAQ for a func. overall.

  This loop runs perfectly. The reason not to use 'merge the overlay' here is this is going to slow down and mess with the frequency of update...

  Second, the loop saves the AVI file:

  

  Firstly - the global Func is red with the ref IMAQ with image captures and layering.

  Second - this IMAQ image is duplicated. Why? Well, if the superposition of fusion will merge the original IMAQ image, it would be sort of slow down to the top of the screen external (and who becomes jerky) (betai, beats me why this happends)

  Third - the overlay is merged

  fourth - the merged overlay is saved.

  Now what happends is that this economy is just way to slow down (but doing it like I did, is not mess with the frequency of update of the external screen) and all this has something to do with the overlay of the merger. If I disable merging, everything is fine - but the video doesn't show any recovery.

  Here's an example of how the overlay may look like:

  

  Someone at - it no clues how can I further improve this to be faster? My AVI file gets as hectic mega when overlays that merges like the picture above!

  Cheesy Hi,

  It seems that your problem is perhaps (cannot tell from the screenshots) that you copy just a reference to your image that you use to enter into that your another loop draws from. The problem there is that you would have a synchronization problem, wherever you use the image in your AVI loop you will change this image even when it is acquired in. A simple change would be to have your Grab acquisition in loop in a local image and copy only in the world. Then you could have your copy loop AVI of this image before proceeding with any treatment. This would ensure that the image is write-only in a loop and read-only in the other, and more to ensure that these access are atomic with respect to the other (given that the copy is blocked images during the operation).

  Eric

• How to track your MQLs?

  Hi all

  I hope just for some high-level strategies and preview how you track your MQLs.

  Once a leader or contact meets a campaign, how is it followed?

  Agree with Eytan Abrahams. A few other things we've done is insert an explicit acceptance of sale of lead which will begin in the SLA. Once we had reports, definitions and agreements in place we tested it with a few teams. After we have data which teams were significantly more than other groups, we took to the sales department. They agreed to change some rules to feed the winner more leads.

• How to communicate with the gsm using lab view

  Please, someone tell me about the following uncertainties:

  1 can anyone tell me about the GSM part in lab mode?

  2. how to communicate with the GSM using lab view?

  3. how to publish my data through GSM using lab view?

  4. how to use ipod to send data to laboratory?

  5. what a DAC suitable for ipod?

  6. how to install the lab for ipod DAC mode?

  without worrying

  FR. mohammad rehan

  rehan_the_great wrote:

  Can u please tell me the minimum requirement of computer (labtop) for the use of labview, like ram size, HARD drive, map chart etc...

  A simple search for "labview requirements" on this site would have given you the information you want.

  http://www.NI.com/LabVIEW/requirements/

• M1217nfw - How to scan with the page feed

  I'm tired of scan one page at a time. Is is possible to scan multiple pages from the feeder to scan? I.m on an operating system Windows 8 using the application "scan to" (don't know what is the name of apps or version.

  TIA

  Hey TIA,.

  There is no much difference between Win7 and win 8 so please follow this document below:

  How to scan with HP software > how to scan a document of several pages in a single file > ADF

   

  (If you need software HP for your MFP HP LaserJet Pro M1217nfw then follow Note :))

  http://support.HP.com/us-en/document/c03584750

  Note: Please find the link to download the HP LaserJet full feature and driver software

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-80811-6&cc=us&DLC=en&LC=en&OS=4132&product=4075472&sw_lang=

• How to talk with microcontroller using RS232

  Hello

  I'm working on a project, which includes a power supply and the Commission of the PRINTED circuit board. This Board is composed of a microcontroller, with realys, power supply.

  My goal is to read current, volatge and reading output relay using the ports of mictocontroller.

  It's my first project, and I don't have any experience in how to communicate with microcontroller using LV (VISA). ?

  How to read the ports?

  I have to write the program for her?

  If I, then, how can I send this program to the LV program?

  I'm a little confused. Could you please help.

  Thank you

  So in your case, your best bet is uot start with programs for example LabVIEW which is by opening LabVIEW > help > find examples.  This must fill out a ton of examples.  Once in the example finder go to hardware input and output.  I was looking at so the two following folders: series and VISA.  Depending on how you communicate to your device you should be able to find an example of program that will let you use and on your way!

  The other source of assistance that I propose is the Nicom/community where many users publish different programs for different applications - you may be able to find an example that is suitable for your application.

  I hope that this help please let us know if you need more help!

• How to associate with 3 rd-party WEP AP (instead of WPA AP) with the universal client?

  the following example shows how to associate with a WAP to a Cisco router access point:

  ! http://www.Cisco.com/en/us/docs/routers/access/1800/wireless/configuration/guide/s37wep.html#wp1037774
  ! universal client configuration example for encryption of the ARS + TKIP, WPA - PSK:

  dot11 ssid test10
  open authentication
  authentication wpa key management
  WPA - psk ascii 7 11584B5643475D5B5C737B
  output

  interface Dot11Radio0/1/0
  DHCP IP address
  encryption ciphers aes - ccm mode
  SSID test10
  station-role nonroot
  output

  Hello

  If you need instead of WPA WEP... Here is the config...

  dot11 ssid test10
  open authentication
  output

  interface Dot11Radio0/1/0
  DHCP IP address
  mandatory encryption wep mode
  1 size 40-bit encryption key
  SSID test10
  station-role nonroot
  output

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• How to deal with operating system windows 8.1 and apps on usb device

  Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

  Hello Mohan,

  Thanks for posting your query in Microsoft Community Forum.

  I can of course understand the situation and will be happy to help with your query.

  Let me ask you;

  • You have the key product for Windows 8 or 8.1?

  You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

  You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

  As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

  You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

  You can follow the steps below to create installation media.

  1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

  4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

  You can also read the article below to create a USB stick recovery.

  Create a recovery USB disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• How to track a condition physical sql not in the filter

  Hello

  I created a simple analysis based on finance - GL balance sheet with columns like company, fiscal year, Fiscal Quarter and Cash (Fact - check). When I run the analysis, I had these physical conditions of SQL not in the filter at all. How to track where these conditions are defined as TRANSLATED_FLAG = ' not ?

  Thank you

  New kid in bi

  Select T111515.ORG_NUM as c3,

  trim (both ' ' of T146058.) LEDGER_CATEGORY_CODE) as c4.

  T156337. MCAL_PERIOD_NAME like c5,

  T156337. MCAL_PERIOD as c6,

  T156337. MCAL_PERIOD_WID in c7,

  sum (case when T102174.) GROUP_ACCOUNT_NUM = '110' then T134466. End BALANCE_LOC_AMT) as c8.

  sum (case when T102174.) GROUP_ACCOUNT_NUM = '300' so T134466. End BALANCE_LOC_AMT) as c9.

  T156337. ROW_WID in c10

  Of

  W_MCAL_DAY_D T156337 / * Dim_W_MCAL_DAY_D_Fiscal_Day * /,.

  W_LEDGER_D T146058 / * Dim_W_LEDGER_D * /,.

  W_GL_GROUP_ACCOUNT_D T102174 / * Dim_W_GL_GROUP_ACCOUNT_D * /,.

  W_INT_ORG_D T111515 / * Dim_W_INT_ORG_D_Company * /,.

  W_GL_BALANCE_A T134466 / * Fact_Agg_W_GL_BALANCE_A * /.

  where (T102174. ROW_WID = T134466. GROUP_ACCT_WID

  and T111515. ROW_WID = T134466.COMPANY_ORG_WID

  and T134466. BALANCE_DT_WID = T156337. ROW_WID

  and T111515.COMPANY_FLG = 'Y '.

  and T134466. TRANSLATED_FLAG = ' no

  and T134466. LEDGER_WID = T146058. ROW_WID

  and (T102174. GROUP_ACCOUNT_NUM in ('110 ', ' 300')))

  Group

  T111515.ORG_NUM, T156337. ROW_WID,

  T156337. MCAL_PERIOD_WID,

  T156337. MCAL_PERIOD_NAME,

  T156337. MCAL_PERIOD, trim (both ' ' of T146058.) LEDGER_CATEGORY_CODE)

  Check in the layer of MDB, properties of the respective table source.

  Thank you

  Srini vieren

• How to track data changes in a LMD scheme

  How to track data changes in a LMD scheme

  My version of the database is 11.2.0

  I want to know how many records inserted,.

  the number of deleted records

  the number of updated records to date on which object?

  example... See table below

  update date object_name insertion deletion

  02-06-14  A                    2             0          1

  02-06-14  B                    0            1          1

  ----

  Thank you

  Gopal

  «The DML surveillance function keeps track of all activity DML (INSERT, UPDATE, DELETE) on a table * given that the statistics were collected last *, Oracle 10 g change the method in which Oracle monitors the tables of DML changes.» Rather than use the clause [No.] FOLLOW-UP in CREATE TABLE or ALTER TABLE statements, STATISTICS_LEVEL initialization parameter now acts as a global switch to control the monitoring for all objects. It is more necessary to toggle DML followed at the level of the object. »

  Monitoring of the Table DML changes