How to transfer files from PC to Instrument via the LAN by SCPI?

Similar Questions

• How to transfer files from PC to PC via a serial port using labview

  I need to transfer files (.txt, .doc, .xls) from PC to PC via a serial port using LabVIEW. Is it possible to transfer files, if so how to transfer?

  Yes, it is possible to transfer files with the serial port using LabVIEW.  The files are just collections of bytes and the serial port is good enough in the expedition of the bytes from one PC to another.  You must connect the ports series with a null modem cable.

  First, take a look at the example of serial communication.   In LabVIEW, go to the Help menu and select «Find examples...» ».  From there, you can search for "serial" or navigate to hardware input and output > series.  Select «Write series base» and Read.vi  Try this example to gain confidence on the serial communication methods.

  Then it's time to learn how to read and write files.  For this, the examples might be somewhat confusing as they deal with files that are presumed to have data of a specific type in them.  I would recommend just familiarize yourself with the functions in the file e/s palette.  Specifically, familiarize yourself with the following functions.

  1. Open/create/replace file - on the side of your destination, you will need to create the copy of the file you are trying to transfer
  2. Close the file - when you're done reading or writing to a file, you must close it.  It cleans the memory used and finalizes write operations that are still floating in the write buffer.
  3. Read a binary file - is the best way to play a file when you don't really like what type of file it.  In your case, you just want to get these read bytes and sent so they can be written down instead of destination.
  4. Write to a binary file - next to the destination, is what will store the bytes in the file that you created with the number 1.
  5. Size of the file get (under the range of the advanced features of file) - you need to know how big the file is, so you know when you are finished.

  OK, so once you are able to create files byte write and read bytes from existing files, you can move forward.

  I suggest the basic method is to have the user specify a source file on the source PC, and a folder on the destination computer.  Then find the size of the source file using the number 5.  Divide this number of size by the number of bytes that you want to transfer to the times.  The series pads are usually around 32 k (if I remember correctly) in order not to exceed that.  Now start to send data by reading a number of bytes and this string output wiring to the feature of writing VISAS.  On the side of destination, you will want to monitor the serial port for bytes and read when they arrive.  This string of yarn to the writing of the function of binary file to add them to your destination file.

  This is the basic outline of how to do it.  He needs to not to overload him write and read buffers on the serial ports.  Initially, you can use delays on the side sending to make sure that the side reading has enough time to digest.  To make things faster, you can bring in a control of flow.

  If all that sounds a little intimidating, there are there Alliance member companies (such as the automation of PrimeTest) who can write this code for you and even provides a turnkey for you solution.

  Happy wiring,

  Dan press

  Certified LabVIEW Architect

  PrimeTest Automation

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• How to transfer files from one user to another in Windows Vista?

  How to transfer files from one user to another under Vista?

  How to transfer files from one user to another under Vista?

  A simple way is to move the file to the Public folder.
  Public folder is accessible by all users.

  How...
  Right click on the file > click Move To > navigate to the Public folder > click on move.

  If you do not Move To option in your right click context Menu, here is the tutorial...
  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  Use an easier method.

  PS you can also use methiod drag-and-drop rather than pass to the method. I prefer the latter.

• Unable to transfer files from Samsung galaxy s2 to the computer.

  Original title: samsung galaxy S2 smartphone files usb mtp

  I'm used to be able to open and to transfer files directly to my Samsung Galaxy S2 via USB.

  I have installed and uninstalled the driver for the Samsung USB phone, but still get the same problem of not being able to transfer files.

  I've attached a screenshot of what I'm getting now by not being able to open the files on my phone.

  Ideas?

  https://docs.Google.com/open?ID=0B1p9fu5iMaDwSzAyc0FEQW5uY0E

  Thank you

  Ivars

  Hi Ivars,

  Thanks for posting the question on Microsoft Community.

  According to the description provided, looks like you are not able to transfer files from a Samsung phone to the computer.

  We are not able to open the screenshot.

  I suggest you to follow the steps mentioned in the link, and the screen turned on this forum.

  How i: post a screen shot on this forum?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  I have a couple of steps that should help you to solve the problem.

  Try these steps and check:

  a. do not connect the USB cable first.
  b. go to settings / wireless & network/usb/connection and tap the icon of the samsung Galaxy phone.
  c. it prompts you to connect the cable. It's when you plug the cable and then another icon on the screen.
  d. If it does not, try to connect to a different USB port.
   
  In addition, you can contact Samsung for help.
  http://www.Samsung.com/in/info/contactus.html
   

  Hope this information helps. In case you have issues with Windows, post here to Microsoft Community.

• How to transfer files from mac to ios device?

  I am trying to transfer files from my Mac mini to my iphone via airdrop, but I don't see my device in the drop menu. How can I transfer files other than the drop?

  Another method is iCloud drive:

  http://www.Apple.com/icloud/icloud-drive/

  iCloud Drive FAQ - Apple Support

• How to transfer files from pc to disc

  How to transfer programs from pc to a disk

  Drag-and-drop the file on the USB key in Windows Explorer. (Windows key + E).

• How to transfer files from one account to another

  How to transfer files as music from one account to another? my old account has a virus and it got currupted and I want to know how to put my old files in my new account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  "Fix a corrupted user profile.

  Try this method.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click Show files and folders, protected the clear theHide operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

  If the steps above don't fix the problem, you should contact your provider of customer support for assistance. To find more information about customer support options that apply to this computer, click the button start , click Help and Support, and then click the ask someone or expand your search link at the bottom of the Help window.

  See you soon.

  Mick Murphy - Microsoft partner

• How to transfer files from damaged computer (intact HDD) W7 to new computer with W7?

  Computer fell, breaking the LED screen.  Failed to start.  Buy the new computer, poreferably with OS W7.  How can I transfer files from old computer to the new without losing data?  Should I change to W8, rather than transfer again to W7?

  Monday, December 17, 2012, 15:50:02 + 0000, Ron BMD wrote:

  Computer fell, breaking the LED screen.  Failed to start.  Buy the new computer, poreferably with OS W7.  How can I transfer files from old computer to the new without losing data?

  If you have deleted from the computer, there is a good chance that the hard drive
  has been destroyed, and the files are gone.

  Should I change to W8, rather than transfer again to W7?

  Your choice entirely.

  - http://answers.microsoft.com/message/f940a881-cafd-4a68-8c4d-ac2c26896535

  Ken Blake, Microsoft MVP

• HOW TO TRANSFER FILES FROM WINDOWS MACHINE FOR ESXI

  Hi I want to transfer files from windows to ESXi 3.5 machine, I have a tool winscp. but I am unable to connect via winscp. I activated the SSH too. Sugest me how to transfer files to ESXi

  some links of usful for the same query

  http://www.bhcblog.com/2008/10/18/HOWTO-transfer-files-and-VMS-to-ESXi-Server/

• How to transfer files from desktop to Tablet

  I have a Lenovo running Windows 8.1 desktop and just bought a HP Jet 7, 8.1 Windows running tablet.  I expect to be able to transfer files from my desktop computer to Tablet using the USB cable provided that works very well for charging on a wall outlet with the supplied aapter and the USB cable, so I know that the cable is OK, but when I use the cable to connect the dektop to the Tablet, nothing happens not even an error message.  Any suggestions?  Thank you.

  Hello

  This cable will not work. You need a USB OTG cable such as:

  http://www.Amazon.com/lifetime-warranty-electronics-micro-cable/DP/B005GGBYJ4

  Kind regards.

• How to transfer files from CD - R disc for computer

  importing files

  I have a cd - r disc I need to import information from. How can I get my computer to read the disc?

  I have a cd - r disc I need to import information from. How can I get my computer to read the disc?

  ========================================
  Try to place the CD in your CD drive and go... Start / computer...
  right click on the drive the drive letter, and choose... Explore.
  If the directory of the CD appears, you can copy and paste or
  Drag and drop the files from there.

  If the CD has been created on a previous version of Windows... you can
  you need to install a UDF reader. The following link might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free... Volume UDF - 7.1.0.95 player
  http://www.Roxio.com/enu/support/UDF/software_updates.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

  I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

  The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

  http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

  Tom Ferguson

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• How to transfer emails from a user account on the same computer on Windows mail in Windows Vista

  my name is misspelled when accounts set up for the user after the clean install of Vista Home Premium. I want to create a new account with my name correctly spelled and remove the old once I have everything transferred to the new account. Create the account and transfer my document folders, I think that presents no problems (all my documents are in an external drive), but I'm not sure of the correct way to windows mail transfer. I saw an article inhttp://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile, but it says nothing about the only thing I need and that is to know how to transfer mail from windows. I just reinstalled vista a week ago and I'm still working from my external hard drive, the only thing I really have to transfer from the old account because my Windows Mail. Any help would be appreciated

  http://www.Vistax64.com/tutorials/90298-Windows-mail-messages.html

  See if the above tutorial will help you.

  See you soon.

  Mick Murphy - Microsoft partner