How to transfer programs to the newly added existing SSD HARD drive

Similar Questions

• How can I copy all the content from my old hard drive on my hard drive again?

  My old PC is on its last breath and I decided to replace it. I bought a new more powerful PC and thought that by installing my old hard drive (Windows 7 on a Sata Drive) be simple and give me all my current programs without the need to install again. Unfortunately, my new PC refuses to recognize the old drive and I need these programs. How to copy all the contents of a new (bigger hard disk) without loss of functionality.

  Any help greatly appreciated

  Original title: old to new hard drive

  Remove the old drive, (just unplug its cables) reboot the PC, it does not start?

  If the method of connection of the old drive was at fault

  (Or bother readers origonal connections when you installed the old disk)

  BTW, you can not use the old drive as primary boot on your new PC drive, or you can access all the programs that have been installed on this subject.

• Iomega StorCenter ix2-200 how automatically save everything on the NAS to my external HARD drive?

  Hey, I have a WD 3 TB my book around the pose I want to connect to my IX2-200 and use the external hard drive to automatically back up everything that's stored on my NAS.

  How can I do this?

  Thank you.

  Not sure wheter ix2 is able to work with > 2 TB is spread over its USB ports, but normally you would create a copy job that contains "all directories".

  If your ix2 doesn't detect your USB, try to repartition your drive USB-2 to + 1 TB

• How to transfer libraries from Final Cut Pro to another hard drive?

  as you can see, my final cut pro and iMovie libraries take up a lot of space. I would like to move into my external hard drive and remove the internal hard drive. I am worrying that the editing software will not be able to know where libraries are, so can you help me? BTW, I don't like on iMovie libraries. shortly after hötting screens, I deleted them.

  PCF. Open select each (sequential) library that you want to move, open the Inspector > Info and click on the button consolidate to collect amy media you used outside the library. Then quit FCP.

  In the Finder, drag the libraries to your external drive. That their copy.

  Double-click the library icons in their external location. Open projects to make sure that everything is OK. When you are satisfied, they are OK, libraries can trash on your system drive.

  Russ

  PS: This is an excellent bookon the management of the library.

• How to assign letters to the editor for USB external hard drives permanently

  I have an external USB hard drive where I store all my media files.  When I have Windows Media Player search this drive to index all my files, it indexes them in a specific directory.  I also use Media Player to sync my MP3 player using the playlist option in Media Player.  If I plug another external USB storage device until I plug the hard drive, it must be the drive letter, & if I try to sync my MP3 player, all of the flie links are broken.  Is it possible to set up a reserve of drive letter for my hard drive so that it will always be available on this hard drive when I plug?

  USB Drive Letter Manager by Uwe Sieber - http://www.uwe-sieber.de/usbdlm_e.html MS - MVP - Elephant Boy computers - don't panic!

• T420 replacement of the original by a SSD hard drive

  Hello world

  In order to increase the speed of my laptop (Lenovo T420), I would like to replace current hard by here a SSD (link).

  I already made some changes on the desktop, but never on laptop.

  Could someone let me know if it is possible, about the size of the hard disk (2.5 inch 100 X 69,85 X 6.8 (mm) - form factor) connectors (SATA) or other points that I should care?

  Thank you

  Good day.

  Fab

  The series Samsung EVO will agree and will work. Everyone has an opinion about the brands that they like and dislike. Personally, I've never had a problem with any SSD Samsung, although I had a few problems with some of their older readers focused on the plateau. Others have problems with other brands. I will say that SSDs, in general, don't not differently from the readers focused on the plateau. Platinum discs usually (not always) break down slowly so you can get most of your data. SSD die suddenly and completely. Backups are necessary. I tend to keep operating systems (which can be recreated) on the SSD and try to keep my data on traditional disks. If you don't have a WWAN card, think about getting a disk for your OS mSATA and keeping your old drive for data

• c: drive has 10% free space d: has 99% free, how to transfer programs from c to d?

  How to transfer programs from c to d?

  Hello

  Have you tried to clean the junk files that are normally found on your c: drive? To clear the temporary files click Start-> run, type & -> % temp %-> click ok. Delete all files in the temp folder.

  Also to recover space on the partrition, you need to run Disk Cleanup and compress old files. See also http://support.microsoft.com/kb/956324.

  To start disk cleanup, open my computer-> click drive c :->, right click Properties-> you get a tab for disk cleanup.

  If you do not plan to uninstall the service pack you can try to remove the $NtUninstall in the windows folder.

  Note that the folder is marked as hidden, so to see it, you must have configured Explorer to show hidden files/folders.

  You can also (for the record of $ $NtServicePackUninstall): If you want to keep these files to uninstall later goal you can make a backup of the folder to a CD for example and replace when uninstalling.

  You can also try disabling the system restore and disable hibernation (Hibernate mode writes an image of what you are currently working on a special folder on your hard disk and then shuts down your computer almost completely). To turn off Hibernation: click Start-> Control Panel-> Performance and Maintenance->, click Power Options.

  If you want to move the files to program from C to D, the best way is to uninstall and custom install applications on the D drive.

  I hope this helps.

• How to add programs to the start of the file using Vista

  How to add programs to the start of the file using Vista

  Hi Harry,.

  Oddly enough, you can actually do it in msconfig except if it is already there and simply not checked as opposed to not being do not at all (although you would think that they would understand this option).

  The easiest way is to add the program (or a shortcut to the program) in the folder all Menu Programs Startup.   Here is the procedure: http://www.ehow.com/how_5098465_add-startup-programs.html.  Remember, to do this, you must either a shortcut existing (perhaps on the desktop or elsewhere in the menu all programs) or you need to find the source file (probably somewhere in C:\Program Files depending on what you want to add) and either copy it and add it to the startup folder or right-click on it and create a shortcut to copy into the startup folder.  Once you reboot, this program starts during the initial commissioning process and you will now be able to control using msconfig.exe, if you wish.

  Another option is to do this by using the registry editor.  If you decide to try this, first create a restore AND system restoration point backup of the registry before you begin.  Here is the procedure: http://www.ehow.com/how_7304438_add-program-msconfig-regedit.html.  I recommend to use this ONLY if the previous procedure does not work for some reason any as long as that the procedure is simpler and safer.

  If you want a simpler way to manage and control startup programs, you can try it free WinPatrol http://www.winpatrol.com/download.html that change monitors for startup programs if you set it to run in real-time so that you know when to try new programs are added to your Start menu and, for the purposes of this question includes an Add button which opens a link to a window of Windows Explorer where you can browse the program you want to add, click open to select and then add it directly to the commissioning.  If you prefer it does not work all the time, you can simply uncheck the box which includes this program and it will work only when you choose to run (but at the start, will work as an indication otherwise or configured).  It will appear not in the start menu in all programs (Finally, WinPatrol is, but not programs, it adds to the start), but it will appear in WinPatrol (which also lets you manage what you want or not start with checkboxes as in msconfig) and sure in msconfig - but only after a reboot is complete the process of adding.

  I hope this helps.  Personally, I use WinPatrol myself and let it run in real time.  Since I do a lot of installations, it helped me often prevent the addition of a startup item I haven't really need and reduces how many times I actually need to check what is happening out there.

  If this answers your question without the need to repost in another forum, please mark it as an answer.  If this isn't the case, then of course you must republish as suggested above.

  Good luck!

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• How to transfer pictures from the desktop Dell to MacBook Pro Photos

  How to transfer pictures from the desktop Dell to MacBook Pro Photos

  Writing an effective question of communities of Apple Support

  On the local network.

  External hard drive.

  The thumb drive.

  Cloud storage.

  Messaging.

  etc.

• How to remove programs from the system tray without removing them from the startup?

  How to remove programs from the system tray without removing them from the startup on Windows XP folder?

  Hello

  The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

  The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

  Alternatively, you can hide the icons in the system tray.

  Here's how:

  1. right click on the taskbar and select "Properties".

  2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

  3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

  If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

• How can I run two disk hard of (adding a 2nd hard drive) on the flag a1020n?

  How to do two hard drives on the a1020n Pavilion, after adding a new hard drive for my existing CPU?  My old hard drive is out, so I will install a new hard drive, redefinition of the new hard drive, but I still want to have access to the old disk until I have transferred all my personal files to the new drive.  I saw answers to self-help.

  Yes. I often throw in additional disks other PC as a second drive... just give Windows a minute or two to find and configure the drives after their installation. You can use the Explorer to browse the file structure.

• How to transfer data from the 7 Millennium

  How to transfer data from the 7 Millennium

  You will need to manually back up your files by copying and pasting on a device from external storage such as a USB key or external hard drive.

  Then copy them on Windows 7:

• How to transfer values to the popup while the bean in application scope?

  Hi all

  I use JDeveloper 11.1.1.4

  My scenario is that I have a < af:popup > with a component of < af:outputText >.

  I need pass values of output text dynamically according to the scenarios.

  My grain of support is application scope . So I'm not able to pass values using get and methods.

  My Design as,

  < af:popup id = "p1" contentDelivery = "lazyUncached" >

  < af:outputText value = "#{managedBean.getDynamicText}" id = "ot1" / > "

  < / af:popup >

  Now I run the application I'm not get all values in text during debugging output, I am able to set the value, but it didn't reflect on the page.

  How to transfer values to the popup while the bean in application scope?

  Thank you...

  At the bean, why don't you set the value to a variable pageflowscope and point the outputtext popup to the pageflowscope variable?

  () .getpageflowscope, set AdfFacesContext.getCurrentInstance ("nomvar", value);

  
  

  Thank you

  Alisson
  

• When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  Hello

  Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
  drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
  at 4 GB.

  Overview of FAT, HPFS, and NTFS file systems
  http://support.Microsoft.com/kb/100108

  How to go beyond the limit of 4 GB on FAT32
  http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

  -------------------------------------------------------------------------------------------------------------------------

  The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

  Zip and Split - free
  http://zipandsplit.toolazy.me.UK/

  Split and Zip - free
  http://www.jtoolgame.com/tools/splitzip.html

  Akhir Split Zip - free
  http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">