Classic i - pod, i-tunes not recognized not

plugged the iPod on a Mac Classic.  Naturally, it erases all the music on the iPod. However, none of the music on the Mac was recorded on the ipod.  The monitor of playback for music stated, 'no music'.  Then, to make matters worse, when I plugged the ipod into my PC, it has not copied anything from the computer.  I went to devices on the drop of i-tunes, but the iPod does not appear as a device.  At one point, I got a warning to the effect that the iPod was corrupt.  I tried to reset by pressing the menu and select button, got the picture of the Apple, but still i-tunes does not recognize the device.  I tried this on another PC, that I have before at the end.  Same result. Both computers have the latest version of i-tunes.  On the page 'about' on the i - pod, I see that the version is 2.04PC, so I guess that the original software was for a PC and plug it into a Mac that messed up.  Can I load onto the ipod via the internet on PC?

Naturally, it erases all the music on the iPod.

Don't know what that means "naturally"...  If iPod was already associated with your Windows computer's iTunes library and you connected to your Mac, it shouldn't erase the iPod unless specifically can you tell iTunes Sync music library iTunes to Mac or do a restore (to erase the iPod).  Since that it has been deleted (probably with a restoration), after the restoration, the iPod uses the manually manage music and videos by default.  It still "synchronizes" but nothing is loaded onto the iPod.

If you are planning that iTunes to automatically sync your music library on iPod, you assign to Sync music.  Find the iPod touch device in iTunes.  Here is a screenshot of the upper left corner of my window in iTunes, iPod button circled in red

Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  To the right, the music from the iPod settings screen.  Check the box to Sync music.

NOTE: All of the songs on the iPod that are are not in your iTunes library (on computer) will be lost.

This enables automatic synchronization.  You can choose to synchronize the entire music library (if it fits) or a part of the selection .  Set up this screen as desired, then click apply to sync.  Further, iTunes automatically keeps iPod "in phase" with the changes to your music library (or the selected part of it) when you connect the iPod (or click sync , if already connected).

NOTE: If your iPod is currently "corrupt", you will need to do a restore of the iPod in iTunes, before you can set it up to Sync music.  The restore button is on the settings of the iPod summary screen in iTunes.  Use any computer you plan to use with the iPod, to proceed to the restore.

Can I load onto the ipod via the internet on PC?

Embedded iPod software is the same, the only difference is how, the iPod's hard drive is formatted for Mac or Windows.  And do a restore on the iPod in iTunes, it's how the iPod software is reinstalled.

Tags: iPod

Similar Questions

  • PCI TV tuner not recognized in Windows 7

    Original title: recognition of Harware problem

    I tried to install a PCI TV tuner in WIn 7, but the computer does not recognize it. I tried it on another computer running Win 7 and it is recognized it. Any ideas?

    Hi Sockmonster,

    1. no TV tuner appears in the Manager of devices under sound, video controllers?

    2. is your updated TV tuner card?

    Step 1: Look for errors in Device Manager

    a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

    (b) in Device Manager, look for the device and then double-click the device name.

    (c) under the general tab, find the status of the device for any error code indicated.

    Check out the link:

    Get help with (valid also for Windows 7) Device Manager errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

    You can visit the following links and check if it helps:

    Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

    http://support.Microsoft.com/kb/934531

    Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

    http://support.Microsoft.com/kb/929453

    You can also check out the following link and try the suggestions provided by cheque and eRwIn jOnEs Tuesday, February 23, 2010 05:11 if it helps:

    http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Tuner not found on the Qosmio F20-149

    Hello world

    I have a Qosmio F20-149. After the transfer of my place of residence in another city in the same country) I suddenly see that my media reports "tuner not found" when I try to access the TV. Also, when I try to configure the internet connection, I get an error message of the MC asked me to restart the computer or contact technical support. Can someone help me with this?

    thanking you in anticipation.
    Best wishes.

    Hello

    I'm not an expert but tuner not found message cannot occur without any reason. There seems to be some hardware related issue and has nothing to do with your home.

    If you are 100% sure that everything was ok a few days ago, I recommend you to roll back OS to an earlier time using System Restore tool. Please also check status of TV tuner in Device Manager? Is this all is well?

  • Error 'Tuner not installed' in Media Center

    I have Windows XP Media Center version and had no problem to watch and record TV live until a few weeks ago. All of a sudden, I get an error "tuner not installed." I did a system restore to a date where the tuner works and it has failed. Any ideas for me on how to get my tuner to work again? I saw a bunch of other questions like this on the web... but the technical details of it go above my head. Not sure if someone got a good solution. Any help would be appreciated. Thank you!

    Update your tv tuner card driver. Make sure that the video decoder works.

    http://Microsoft-Windows-XP-video-decoder-check.software.informer.com/

    Visit the manufacturer's Web site to download and install the latest driver TV Tuner compatible TV Tuner. Open Windows Media Center and start installation again to reconfigure it.

    S.Sengupta Media Center MVP

  • Error: "Tuner not found" with Windows Media Center

    Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

    I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

    There is a great thread to
     
    with people have reported this problem with this tuner.
     
    Unfortunately, it looks like the only solution people have found is to replace the
    Tuner with another brand.
     
    I don't know if it's the hardware failure or something else, but looking at this
    wire, if it was ME, I cut my losses and replace the tuner.
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     

  • Windows Media Center TV tuner not detected

    My current operating system is Windows Vista Home Premium Service Pack 2
    (I installed SP2 from microsoft.com)
    I have the Version of the Windows Media Center - Windows Vista 6.0.6002.18030 software (vistasp2_gdr.090429 - 2357).  I'm trying to watch TV on my laptop.  I have Windows Media Center and am confused about the version because I saw this - if the version number is 6.0.6001.18000, you are NOT running Windows Media Center TV Pack.  You are running the version of Windows Media Center, which is included in Windows Vista or in Windows Vista SP1.
     
    As you can see my version (numbers) are alittle different on the end, also the info in parentheses (vistasp2_gdr.090429 - 2357) I don't know what that means.  When I tried to configure the tv signal in Windows Media Center, I was told: the TV signal cannot be configured because no tv tuner hardware was detected. So, how can I find out if there is an internal tv tuner installed and everything is not detected?  My laptop is new - 3 weeks, and I think that all the drivers are current.   While they inspected the help windows vista hardware compatibility list for 64-bit vista tv tuners, I was flooded for more information that I knew what to do with.  I'm obviously not a computer genius and will never be.  I'm open to suggestions.  I just need to know what I have to do to be able to watch TV on my laptop.  Any help will be appreciated! Thank you.

    Hello

    Thanks for choosing Windows Vista Forums.

    I recommend you contact the manufacturer of your computer to check for the presence of a TV tuner.

    All Vista computers are delivered with the same version of Windows Media Center.

    Here is a link below for compatibility with Windows Vista Hardware.  Please let us know status.

    http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx

    How to use Windows Media Center on a Windows Vista-based computer to watch, pause and record live TV

    http://support.Microsoft.com/kb/942375

    Solve problems with watching TV on your computer

    http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

    Please have a read of the article below:

    Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

    http://support.Microsoft.com/kb/934531

    Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

    http://support.Microsoft.com/kb/929453

    If you experience problems with your TV tuner card, I suggest you go to the Web site of the manufacturer for the software updates and technical support.
    Kind regards
    Technical support of Microsoft-yama.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP slimline s3120n-Windows Media Center - Tuner not installed error

    Media Center does not. Tuner not installed message! Help!

    I have a hp slimline s3120n. I got probably around January. Ive been watching TV on it with a card of A 48, 3 ViXS Pure TV - U. recently, then do not install anything I turned it on and got an error from the center of media saying "Tuner not installed" I tried all the things on the hp support Web site
    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01187871&lang=en

    I have also a windows server backup from my computer. I restored my computer to a point where the computer work and it didn't work. I looked everywhere on the internet and you can find a lot of people with the same problems, but not answers

    my card is displayed as working on Device Manager too so it must be a software problem.
    im running windows vista 32 bit
    I have tried reinstalling drivers did not work, tried to remove the map and back does not work

    I have HP slimline is now Windows 7 and Vista. When I upgraded to Windows 7, I did not go off Homegroup. My Vixs tuner worked fine for 2 years. Recently, may 2011, I decided to start the homegroup; What a mistake!

    My Media Center said that I had no TV tuner.
    After much research, I found this solution.
    In windows 7 go to "Administrative Tools" and launch 'Services '.
    Scroll down to "Windows Media Center Receiver Service" and under "connect as" column, make sure that setting is 'Local System' and not 'Network Service '. The "Startup Type" value in the manual. not automatic.
    This fixed my issue.

  • Cannot get live TV on Media Center Center (errors - TV Tuner not installed - ehrecvr.exe)

    Three weeks ago, I got a Dell PC with Windows Vista and a card Hauppauge WinTV HVR-1250 TV that was installed at the factory.

    Since the first day of use, I have two questions that have taken place that I think are related:

    -To try to watch TV live on the Media Center, I get the following error: "Tuner not installed.  Video cannot be displayed because no tuner found»

    -I get the following popup every 45 seconds or so that said error message "Receiver Service Windows Media Center has stopped working".  The details of this error message below:

    Signature of the problem:

    Problem event name: BEX

    Application name: ehRecvr.exe

    Application version: 6.0.6001.18000

    Application timestamp: 47919381

    Fault Module name: StackHash_2901

    Fault Module Version: 0.0.0.0

    Fault Module Timestamp: 00000000

    Exception offset: 02ac7d20

    Exception code: c0000005

    Exception data: 00000008

    The system version: 6.0.6001.2.1.0.768.3

    I spent about 2 hours with assistance from Hauppauge reinstall all the Hauppauge software, drivers, etc..  I receive the Hauppauge WinTV live TV but still not be able to get live TV on Media Center (the same error as above - "Tuner not installed.').  The aid office in Hauppauge said that they handled several requests like mine, but not can not solve the solution must be found in Vista.

    I receive TV on the Hauppauge WinTV software, but I prefer using Media Center.

    You have a solution to get Media Center to play live TV?

    Windows Media Center does not correctly configure a combo TV tuner signals that supports ATSC and NTSC on a Windows Vista-based computer

    Watch this possible solutions. Mark L. Ferguson MS - MVP

  • Classic BlackBerry My newly bought classic Blackberry left speaker does not work... Need help...!

    Dear all,

    Well want to help please on this, I am from Pakistan and I had my Blackberry classic delieved me US my cousin bought at the shop online BlackBerry and brought it to the hand. Earlier, I noticed that my classic left speaker blackberry does not only ringing sound music sound and speaker sounds come from the right side of the enclosure.

    Everyone has faced this problem with its new classic, and what should I do?

    Please help or guide me

    Yes I also found this above information on gsmarena.com and phonearena.com there only one speaker

  • in windows media center live tv set up the problem. it pop ups tuner not found.

    TV a hinged ir extension decoder but why I couldn't jooin a network m.?

    This is how the set up works. These article are a good read through:

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01187871

    http://Windows.Microsoft.com/en-CA/Windows/adding-TV-tuners-Media-Center#1TC=Windows-7

    Here, the discussion might help your cause-

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-no-tuner-error/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-tuner-not-found-with-Windows-Media-Center/c9c72430-c6be-4955-8093-9a52ed54d505

  • I removed a second TV tuner. WMC now reports "tuner not found" when he starts recording. Boring. Is there a solution?

    I'm thinking there must be a registry fix just for this.

    I used to have two sticks of tuner TV USB in my PC (Win7 Home 64 bit), but one of them went belly.

    Now when WMC starts a scheduled recording, I have a pop-up balloon reports "Tuner not found". But the TV very well played and recorded normally.

    Is there a simple solution for this? Very annoying. THX.

    In WMC, go to Settings/tasks/TV Signal and set up your TV Signal again.

    WMC has been implemented with 2 tuners and will continue to be a tuner missing until you set up again.

    If you replace the missing tuner, or replace it with another tuner, you need to configure WMC again.

  • My music from my classic I Pod won't play on my computer

    I connected my I Pod classic on my computer. I see the list of my classic I Pod music in the bar of music from I Tunes program. However, the list is light gray in color. When I select a song in the list, it will not play.

    If the list of songs from iPod (as shown in iTunes) is grayed out, it probably means you are using automatic synchronization (setting synchronization music ) to load songs on iPod.  When you use the Auto-Sync, iTunes syncs iPod "" with your library iTunes. You can not directly access songs on the iPod.  This is why they are greyed out.

    Songs on iPod should be in your iTunes library.  To listen to this song in iTunes, find it in your music library and play from there, not from your iPod.

  • TV tuner not recognized by WMC F10

    Hello everyone,

    I got a brand new F10-131. Ideal to use.
    The first time I used the windows media center, he tried to set up the tuner. No probs. As I do not plug the antenna, we don't seen any channel. Ok.
    Then I updated the operating system with windows update. All updates has occurred.
    And now I had 2 problems:
    -Firstly, the ehrecvr.exe module causes an error. I had to disable to avoid having errors at the start of the PC.
    - and now the WMC can NOT find my TV tuner.
    I did download and install the new driver on my PC TV tuner, but it makes no difference.
    I know that the tuner works fine when I use the Qosimo interface (no use of WMC)
    No detection of anomaly in the questioning of my tuner hardware.
    What should I do? I guess it's a problem to use good parameters/drivers, but I've already updated the system and drivers. I thought to reformat the system to have clean, then try again.

    Post edited by: djfizz2

    Hello

    In my opinion, you should do a little test. Please use the System Restore tool and restore the operating system to an earlier time before Windows updates, and check if everything works well again.

  • Windows Media Center TV tuner not recognized

    MEDIA CENTER TV tuner

    Our computer does not recognize the TV tuner, it says that the region (Canada) is not possible, even if we were watch and record the TV for two years. We took the tour get served today and the technician could not find anything wrong, that he hung the Tower while I was in the store and everything worked very well he played TV programs that we previously recorded on the computer. On their return, I hooked the tower to have the same problem until I took the tour of duty please help with advice.

    Hi Kimberly MacDonald,.

    1. What is the full error message that you receive?

    I suggest that you reconfigure the TV signal in the media center of Windows and check if it works.

    one) to configure the tuner for use with Windows Media Center, on the Start screen, navigate to tasks.

    (b) click settings, click TV, and then click Set Up TV Signal.

    (c) follow the on-screen instructions to complete the installation.

     

    Set up a TV signal in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

     

     

    Solve problems with watching TV on your computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

    If the problem persists, then you need to install the updated driver for the TV tuner card by visiting the website of its manufacturer.

    Get help for your TV tuner card

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-for-your-TV-tuner-card

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Classic connection Add-In does not work - db selection did not get recognized.

    Hi all

    With my client, many users work with the classic Essbase Add-In on their computers. The Add-In is distributed and installed with a software package. Out of these facilities, a machine makes problems. Excel version 2010 begins and the Addin too. Then under Add-Ins > Essbase > Connect the login window appears. The user name and password are given and OK button. See a list of Applications and databases. When a database is selected and you press the OK button, the selection changes to the database at the top of the page and the window does not disappear.

    This also happens with another user that can run on a different machine (so no access rights).

    The Add-in is turned off and on again. Problem stays.

    All other add-ins are disabled. Problem stays.

    Anyone seen elsewhere or have a suggestion?

    Thanks in advance.

    Kind regards

    Philip Hulsebosch

    Saw this problem occurs when there is a space at the end of the name of the server, for example

    "my.essbase.server" (the quotation marks to highlight where space is) caused the behavior that you describe.  We found that some microsoft products copy happily a space at the end when copy and pasted from outlook or word or etc... So we always adovate by manually typing in the name of the server

    Let me know if this helps - took us forever to understand.

Maybe you are looking for

  • Windows xp cannot read the wpa2

    my xp computer does not connect to my netgear wireless signal.  NETGEAR use wpa2 encriptación and the computer with xp on it will not connect. any ideas where to find a patch or something else

  • Activate the floppy drive boot from

    -How can I activate A floppy drive to boot from? Do I have to be an administrator?Thank you

  • HP Pavilion 17-e116dx: System disabled after the failure of power password

    My wife stopped using his laptop for a few months, today I tried to recover his password I am the administrator, when I tried to connect, the system asked me to password - admin password, I do not set up any current password so I tried 3 different co

  • How to configure repeater using aironet 1140?

    Hey,. I have an Air-AP1141N-A-K9 and I want to set up a Repeater bridge. I already have the web interface to the top. I was wondering how to set up as a Repeater for my main router. I think that it only supports 2.4 Ghz The IP address of my main rout

  • UNIX subsystem Windows Ultimate

    I just activated the UNIX subsystem in Windows Ultimate through "Programs and features" when I was finished, all I saw was a folder on my computer labeled "Subsystem for UNIX - based Applications" which contained a help file and a link to download th