How to turn on WLAN on Satellite A200 - 1 M 8 with Vista operating system

Similar Questions

• Satellite A200 - 1 H 2 with Vista does not work after restoring

  How-dee!

  I have a laptop Satellite A200 - 1 H 2 with a Windows Vista Home System.
  Computer was never connected with the Internet and I use it only for the doc write, play music and watch movies. It worked fine up until yesterday.

  After turning on, there was a massage "c:\windows\system32\cmd.exe" corrupt (spleen? Sorry, I don't remember).

  So, I used the product Toshiba Recovery DVD and after reinstalling system reboot. And now I have a "Startup Repair" massage, which is:
  "Windows cannot repair this computer automatically" and below:
  "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and then restart the computer. If you continue to see this massage, contact... blah, blah, blah. .... Click Finish to exit and turn off your computer.

  It's weird cos I have no device connected to my computer and it was during my recovery system.

  After pressing on "discovers the diagnostic and repair details" another pop-up window shows and he says, that all test "completed successfully" (the last is "Control of State Setup") and who
  "Root cause found.
  --------------------------
  Failure so that the Setup program is underway"

  What should I do now? I don't have any bootable Windows Vista DVD.

  Please heeeeelp!

  PS. Sorry for my poor English :)

  That s odd and I assume that the laptop would be correctly after reinstalling the Toshiba Recovery disk
  However, maybe that something was wrong during the first attempt

  Try using the recovery again disk and try reinstalling this cell second time

  Good luck

• Satellite L500 - BSOD Identification of the Vista operating system

  Hello

  I have the Satellite L500 (PSLJ0A-01F013 (experiencing a BSOD (Stop: 0X000C1F5) what googling has identified as being a file corrupted on HARD drive.)) Unfortunately, the difficulty MS must be applied before the corruption. I tried many options, I can not force a recovery by using the 0 key to the power upward and virtually abandoned. I intend to install a new HARD drive and load it Vista again. My main question is, how to identify if the licensing system is 64-bit or 32-bit? The certificate of authenticity only identifies it as Home Premium OEMAct.

  If I reinstall Vista, is there a way to create a Toshiba Recovery disk as soon as I got the laptop works to my satisfaction, that is to say with all the drivers and additional software loaded?

  Thanks in advance

  > If I reinstall Vista, is there a way to create a Toshiba Recovery disk as soon as I got the laptop works to my satisfaction, that is to say with all the drivers and additional software loaded?
  If you install the clean version of Vista, you will not be able to create the Toshiba recovery disc.

  Only when the Toshiba recovery image is installed on your laptop, you can create this disk.

  What you can do now is to install Vista clean with all the necessary drivers, tools and utilities and some third party application to create the recovery image. Many people here have reported that the right application for the creation of recovery image is Acronis.

  You can also try to restore disc original order of Toshiba.

• Satellite Pro L40 - 15 c with Vista: WLan LED does not illuminate

  Hello

  I'm new on this.
  I have Satellite Pro L40 15 c with Vista operating system.
  Although I can access the internet via my WiFi connection, the orange LED on the front of the machine does not shine.

  He failed yesterday. All agross A a come before and all the solutions?

  Kind regards.
  Maurice.

  Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

  It seems she s question a Vista Atheros. Make a WLan driver and the update of Vista!

• How to install Windows XP on Satellite A200 - 1 M 8 home edition?

  I have Toshiba Satellite A200 - 1 M 8 with Windows Vista, but I want to change to Windows XP.
  When I try to copy in the blue window that I don't message none found disc.
  I try to change in the BIOS but no hard drive selection.

  How to change the IDE to copy windows xp?

  On this forum, you will find a large number of discussions regarding the installation of Windows XP Home edition on laptops as A200/P200 or A300/P300, at the request of nLite which can help you to install Windows on your laptop.
  Use the advanced search on this forum and you will find a large number of them.
  What you need is the SATA driver that must be loaded prior to installation of WXP begins.

  I assume you want to change the settings in the advanced options of the BIOS SATA from AHCI to compatibility mode, right?

• Re: Satellite A200-237 ETA-6 with Windows XP

  Hi ppl,

  My name is Sibbe and I am from Holland and here again.
  A few months ago, I bought the Satellite A200-237, distributed initially with Windows Vista. I really enjoyed working with Vista, but everyone knows that Vista slows down your system. Also a lot of software and games do not work on Vista so I wanted to try if my laptop also works with Windows XP.
  So I installed Windows XP on my laptop, no drivers or software. After hours of searching on Google, I discovered that a lot of things that worked on my laptop with Vista don't work also on XP. For example:

  -FN button does not work on XP ((quand j'ai appuyé sur le bouton dans Vista, flashcards est apparu sur le dessus de mon écran) only the green light comes on but the F1 to F12 keys does not work)

  -Toshiba Power Saver ((en fait, cela ne fonctionne pas sur Vista mais c'était parce qu'il y avait beaucoup d'options dans les paramètres d'énergie de Vista) now, on XP, you need to install another program first before saving work?)

  In any case, is anyway how I can do these things work under XP. And, of course, would be nice if I could use the flash cards for the FN key, but I suppose Toshiba has never done those for XP.

  Data sheet:
  Intel Core 2 Duo T8100 2.09 GHz
  2 GB of RAM
  ATI Mobility Radeon HD2600 256 MB
  230Gb S - ATA HDD
  Windows XP SP2 (not yet fully updated)

  Thanks in advance!

  Friend Sibbe

  Post edited by: Sibbe

  If you have installed XP on the Satellite A200 series you should not t forget to update the BIOS to the XP version.
  If you n t update the BIOS, then your FN buttons will not work even if the correct drivers are installed.

  So be careful and do not forget that the BIOS and other XP drivers designed for you, the series are installed correctly!

• Satellite A200-1CR: can I install Vista using my Vista DVD installations?

  Hello

  I would like to get some answers to my questions...

  I have the satellite A200-1CR (PSAE0) and I want to install vista on my own... not with the recovery DVD but I have some serious questions...

  (1) may I have problems during the installation... (Drivers SATA, etc.), problems of BIOS or Toshiba has no restrictions?

  (2) what problem if I erase the secret (winre) partition and what is its purpose?

  (3) if I do a clean install with my DVD with my vista... If I want in a future close that I can use the recovery DVDs I got it or not?

  (4) to the drivers section for my laptop for each part has 5,6,7 or 8 drivers for win vista... which is good, or it's all the same?

  (5) in general, what do you propose? Are there reasons why not to do my format? I did a large number of formats in desktop, but never in the notebooks.

  Sorry if you tired with my questions and sometimes my bad English...
  Thank you in advance...

  Why not.

  As to the question;

  (1) possibly the Vista operating system does not recognize the HARD drive during the installation of the OS. In this case you must install storage Intel Matrix (Robson package) Manager first! It of a driver SATA and can be found on the Toshiba or Intel driver page.

  (2) Windows recovery environment (WinRE) is placed on the hidden partition and it of necessary to restore a damaged operating system.
  The Vista operating system automatically creates the hidden partition and Windows re installing the OS.

  (3) Yes, you can use the Toshiba Recovery CD. But it erases the entire HARD drive always.

  (4) take a newer version

  (5) generally I put t see any reasons to get in shape. The preinstalled Vista operating system has been configured and all the tools of Toshiba, drivers and additional software should work very well.
  I don't recommend a new format if the operating system is working well.

  Good bye

• How to turn off the tips and announcements in InDesign CC with to make their appearance in the light yellow

  How to turn off the tips and announcements in InDesign CC with are appearing in yellow frames clear when you hover over with the mouse

  Hi Robuncas,

  Open your preferences and to the tab interface in ToolTips select None.

  See screengrab below.

  John

  

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

• Satellite A135-S4437 does not start the Vista operating system more

  Hello

  I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

  I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

  Thanks in advance for any help!
  PG

  Are you can access BIOS by pressing the ESC key?
  Select this check box.

  But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

  Welcome them

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I recover the Vista operating system?

  I have a tablet that is using Windows Vista. Hard to drive tablets erased clean with Vista. How can I recover the Vista operating system? I hope that I don't need to go out and buy a new OS, because the Tablet is worth only a few dollars and can be lower than the price of a new operating system.

  Hello

  Contact the manufacturer of the tablet on the way to reinstall the operating system.

  If it was a desktop computer or a laptop we could help you more.

  See you soon.

• LOST laptop computer SOUNDHave WITH WINDOWS. His lost after automatic updates for VISTA operating system. Don't KNOW HOW TO GET sound BACK. CAN SOMEONE HELP ME?

  Have a laptop with the Windows Vista operating system.  After an automatic update of 3 steps software, I had sound.available and can not hear anything when I use Media Player.   I don't know how to get the sound to my laptop.  Can someone give me some advice on what I can do to get

  my sound back on my laptop?

  Thanks for your help, I appreciate it.

  Rmartinehp

  Hi rmartinehp,

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing the issue with sound, after the automatic updates, you have lost the sound.

  Before you start the troubleshooting steps, I need the information required.

  1. this problem occurs with particular application?

  2. (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry)

  I suggest you to see the links and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Transfer of license with a twist

  So I've recently upgraded to a new system... Virtually everything has been replaced - the motherboard, RAM, graphics card, processor... Everything but my HARD drive. I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Is there anyway for me to be able to turn it on for my new rig? Thank you.

  If you have a retail copy of Vista, you must activate by phone.  Click Start, type "slui 4" and press ENTER.

  See http://support.microsoft.com/kb/940315

  If your copy of Vista is preinstalled on your computer, you can't use it with the new motherboard and you will need to purchase a copy of the license full of Windows.  Most of the editions of Vista out of support in two months so consider Windows 7.

• How can I get a copy of my lost 'product key' for my Vista operating system?

  How can I get a copy of my lost 'product key' for my Vista operating system?

  How can I get a copy of my lost 'product key' for my Vista operating system?

  It is quite difficult to 'lose '.

  1. If you have a desktop computer, the product key is on the side or rear.

  2. If you have a portable computer, the product key is down.

  All else fails:
  13 free product key finder programs
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  Belarc Advisor
  http://www.Belarc.com/free_download.html