Satellite L500 - BSOD Identification of the Vista operating system

Hello

I have the Satellite L500 (PSLJ0A-01F013 (experiencing a BSOD (Stop: 0X000C1F5) what googling has identified as being a file corrupted on HARD drive.)) Unfortunately, the difficulty MS must be applied before the corruption. I tried many options, I can not force a recovery by using the 0 key to the power upward and virtually abandoned. I intend to install a new HARD drive and load it Vista again. My main question is, how to identify if the licensing system is 64-bit or 32-bit? The certificate of authenticity only identifies it as Home Premium OEMAct.

If I reinstall Vista, is there a way to create a Toshiba Recovery disk as soon as I got the laptop works to my satisfaction, that is to say with all the drivers and additional software loaded?

Thanks in advance

> If I reinstall Vista, is there a way to create a Toshiba Recovery disk as soon as I got the laptop works to my satisfaction, that is to say with all the drivers and additional software loaded?
If you install the clean version of Vista, you will not be able to create the Toshiba recovery disc.

Only when the Toshiba recovery image is installed on your laptop, you can create this disk.

What you can do now is to install Vista clean with all the necessary drivers, tools and utilities and some third party application to create the recovery image. Many people here have reported that the right application for the creation of recovery image is Acronis.

You can also try to restore disc original order of Toshiba.

Tags: Toshiba

Similar Questions

  • 6 of Lightroom on DVD identifies by the Vista operating system error.

    MY. Lightroom 6 DVD identities Windows 7 Home Premium operating system such as Windows vista and will not be installed. Thai is a problem with my particular DVD or if someone else has experienced this problem. In other Wrds, is a general software default on sold DVDs or something particular vety.

    An Internet download of 6 Lightrrom installed without a problem, as well as previous versions of ligghtroom

    My Lenovo' carbon X 1 system of operating is Windows 7 Home Premium 64 bit, virtually identical to Windows 7 Professional on which the DVD installed perfectly on my other computer.

    The 'solution' fom AdobeSupport has failed.

    Try the solution here:

    instalation of lightroom6 rejects installation on Windows 7 with note that windows vista is not supported

  • Clean reinstallation of the Vista operating system

    My Toshiba Satellite A505-S6960 works very slowly. I have the recovery disc for this laptop. How to clean its contents, wash his car so that I can start over & re - install the Vista operating system.

    Hello

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    See you soon.

  • How can I recover the Vista operating system?

    I have a tablet that is using Windows Vista. Hard to drive tablets erased clean with Vista. How can I recover the Vista operating system? I hope that I don't need to go out and buy a new OS, because the Tablet is worth only a few dollars and can be lower than the price of a new operating system.

    Hello

    Contact the manufacturer of the tablet on the way to reinstall the operating system.

    If it was a desktop computer or a laptop we could help you more.

    See you soon.

  • I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

    Windows XP instead of Vista.

    I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

    Hello

    There are a few things that you would have to do to install XP instead of Vista:

    1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

    2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

    3 XP runs with 512 MB of RAM, although a little slow by today's standards.

    4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

    http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

    Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

    http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

    See you soon.

  • MCAFEE VS. NORTON 360 TO PROTECT THE VISTA OPERATING SYSTEM

    I have a Qosimio Toshiba computer and it came with trend Anitvirus software for the first year. I have the Vista operating system. I want to either update Mcafee or Norton 360. What is the best for my computer and do I uninstall the antivirus software of original Trend before or after the installation of the new software, and how do I do?

    Hello

    Frankly, I would not use all three, and never you have on the machine now that you must
    Delete (so you have only a major antivirus on the system) do not forget to use the removal of their creator tools
    or anyone who can leave problems using scraps.

    Download replacements, but do not install until after the removal of those present and restart.

    For any need to use this method:

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN

    Instructions/TrendMicro removal tool
    http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

    How can I uninstall my Trend Micro program removal tools fail?
    http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

    ========================================================

    Here's what I use and recommend: (all are free and offer exceptional protection)

    Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
    Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

    Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

    Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
    (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
    http://www.avast.com/eng/avast_4_home.html

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
    Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
    a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • I recently changed to windows 7 from vista. I was wondering if there is a way to recover old photos of the vista operating system... If so can someone help me

    I recently changed to windows 7 from vista. I was wondering if there is a way to recover old photos of the vista operating system... If so can someone help me

    If you did an upgrade and not a clean install, they must remain on your drive. Do a search of *.jpg, *.jpeg and see what you get. If I remember correctly, you will have a folder windows.old that they appear in. You can use Windows Explorer if you want to look in your records in the Windows.Old directory.

    I hope this helps.

  • HP Pavilion a6712f w / HP w2207h monitor. screensaver locks the Vista operating system. How to cancel a blocking?

    HP Pavilion a6712f w / HP w2207h monitor. Screensaver locks the Vista operating system. I have to cut the full powers to restart the computer. What's wrong? Checked with AVG. virus system. HP system checks OK.

    Hello

    In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

    sfc/scannow                (Note that there is a space between sfc and /)

    Let the entire process, then the output type and press ENTER.  Restart the PC.

    Kind regards

    DP - K

  • My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

    My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

    You must connect prove you are currently subscribed.

  • Satellite A135-S4437 does not start the Vista operating system more

    Hello

    I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

    I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

    Thanks in advance for any help!
    PG

    Are you can access BIOS by pressing the ESC key?
    Select this check box.

    But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

    Welcome them

  • How to use a scanjet 2200c with a pc using the Vista operating system?

    Without a positive response, I can't continue to use my scanner because it is not my intention to give up on Vista operating system. At least for the moment. Thank you. Bye bye

    Sorry to say this, but it seems that your product is not supported by Windows Vista. See the document below for more information.

    http://support.HP.com/us-en/document/c01296655

  • OfficeJet 7410 pilot lost after 3 days on the Vista operating system

    I'm on a Vista operating system with an Officejet 7410 printer connected to a network using a Linksys router. About every 3 to 5 days, the printer disappears from the Vista computer and I again to load the driver anywhere.

    Any thoughts?

    Check the updates on this page.

  • Satellite Pro A300: How to recover the Vista operating system

    My friend has a Toshiba Satellite Pro A300 it has a 4 GB of ram, but on Windows Xp shows only 3 GB
    I also want to put in place the back of the Vista, but I can't not insatall any operating system (only the Toshiba Xp dvd)
    (there is a HDD recovery folder on the C drive, I think it is the Vista that he owned before but a don't know how to install it)

    Ok. If the folder in HARD drive recovery then it should be possible to carry out a procedure for HARD drive recovery, remain on the second partition.

    First of all, start Notepad and press F8 immediately after that the laptop has been powered. Then choose the first option called fix my computer.
    A new window should open, and you should choose the last option called Toshiba HDD Recovery.
    Then follow the instructions on the screen.

    This should usually works if the folder of HARD disk recovery and partition has not changed or deleted.

    Check it out if it does not, you will need to order a Vista of Toshiba Recovery DVD:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite M100-165 with XP: how to upgrade the BIOS to use the Vista operating system?

    Hello

    I use my laptop with Windows XP and BIOS version 2.80.

    I want to install Windows Vista, but when I download the BIOS of compatible v5.40 Vista it says

    "This Bios is only compatible for portable computers with Windows Vista!

    Do NOT install this Bios if you have Windows XP as operating system running! »

    When you download the version 2.80 compatible XP, I got the same message saying that it was not compatible with Vista.

    Now, should I first install Vista with XP compatible BIOS 2.80 and then install the compatible BIOS 5.40 5.40 or Vista install XP first (no traditional update available, only Windows updates are present) and then install Vista?

    I'm afraid of a bad flash by installing the BIOS compatible Vista in XP.

    Hello

    the best solution would be to do the following:

    1. backup your data and download the drivers for Vista.
    2. make sure that all stored/saved/etc.
    3. install the bios
    4 restart the machine and install Vista
    5. After installing Vista, install drivers and be happy :)

    See you soon

    P.S.: Would appreciate some comments on your success...

  • How to turn on WLAN on Satellite A200 - 1 M 8 with Vista operating system

    How to enable the WLAN on Satellite A200 - 1 M 8 with Vista OS, FN + 8 does not work

    Make sure you wireless switch on the side of the unit is on. Click Start-online panel-online network and sharing Center => manage networks wireless (on the left) click the little more beside the word 'Add' => select 'connect to a network that is in range of this computer' => you will see a list of networks that are in range so, select the one you want and enter the encryption key if it is a secure network

Maybe you are looking for