How to Type directly after a hyperlink without becoming part of the hyperlink

Similar Questions

• How to move a local network printer without having to reinstall the drivers

  Hello

  Is it possible to change a printer to a network printer on a local printer without having to reinstall the printer drivers?

  The computer on which the printer (a Lanier LP116c PCL 5 c) is currently connected [directly] is running Win XP.  It is a stand-alone computer without any connectivity; network, internet ect.   He has no printer drivers installed because the computer had been connected to another computer by using working groups and was able to print at the Lanier through working groups.  But now that there is no longer connected to the 'network', but rather directly connected to the printer, it will not be printed.

  I tried to change the properties of the driver to "tell the computer" that the printer is now connected directly however when I try to open the properties I: "printer properties cannot be displayed.  The print spooler service is not running.

  How to 'know the computer' that the printer is now connected directly without having to reinstall the dirivers?

  Thank you!

  Carrie

  You have two questions.  One is assigning the correct port for the printer and the other is fixing what is originally the print spooler service to not run.

  As much as I can give you guidelines on how solve the second problem, it will be much easier for you to uninstall and reinstall the printer (once the print spooler works again) that in order to create a "USB virtual port" which is what needs to be done unless the computer was once a printer connected by USB is installed.

  Often, but not always, an order print spooler is the result of a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If you have ever had (but retired) a Lexmark or Dell - badged Lexmark printer installed, the command "net start spooler" to step below may fail.  In this case, type the following line in the black command prompt window and then type the command "net start spooler" again:

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the =

  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Once the print spooler has started, click Start > printers and faxes, right click on the Lanier printer icon and select properties and select the Ports tab.  If you already have a USB connected printer installed on this computer, there should be a port named USBnnn.  If there is, check the box and OK your way out and your printer should now print when connected by USB.  If there is no USB port listed, then do the reinstall as explained in an Article.  The driver install package available here should create and install the USB port for you: http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/c30e/c30een.htm

• How to start directly in windows xp without a password?

  My laptop is at a point where I have to press 'enter' on the keyboard to enter for Windows.
  I want the operating system to start without any interruption.
  Please notify.

  Do you mean something like "Configure Windows XP to automatically open a session?

• How can I get firefox to open without my links in the toolbar. I want to just load later

  Firefox opens always with my prior session menu links toolbar. I want to open firefox to open without one of the menu toolbar links and I can tell more later to open links in menu toolabr. Thank you

  Hi, if you are referring to tabs, please open Options (gear) - in the 3 menu bar unless you have moved it > general tab - "Starting Firefox," make sure that it is not set to ' show my windows and tabs from last time.»

  Hope that answers your question.

• How can I replace a source element without having to redo the iMovie project?

  When exporting an iMovie project, I detected that a source element had bad images and export could not comlete (error 10008). I fixed the file and replaced it within the overall project. But after that iMovie refuses to play this clip during the opening of the new project - it shows an exclamation point in the chronology and the message "the clip has changed."

  Is there a way to replace an element in the project?

  A few facts:

  • The clips are AVI containers
  • I used Yodot AVI repair to remove the bad images
  • The repaired file use the same as the original codecs
  • version of iMovie: 10.1.1

  Yes.  With the Finder, drag the clip fixed everywhere where it is saved until it is placed on the old item in project.  When a green plus sign appears next to the cursor let go of the mouse button and you will get a menu.  Click "replace".  The duration and all connected titles, glitches or audio should not be affected.

  

  Geoff.

• How do you overlay images in video without audio loss of the comment behind it?

  I'm making a video that starts with the comment. I want to show images while the person speak always in the background. How do I do this with Windows Live Movie Maker?

  Support is in the Movie Maker Forums:
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?TM=1349183784260

• How to run a while loop continuously without iterate loop inside the fi, a condition is met

  I enclose a VI that once the answer 28 comes the loop must stop and loop should continue an iteration. Can you show me a way for her

  You can stop the loop when a certain condition occurs: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/add_cond_to_for_loop/

  Add a register to offset for the while loop and to implement the feature as below:

  

• How can I watch a video clip without slaughter and reload the buffer

  When you try to watch a video clip... site... it will start and then stop and start again... and so on

  Looks like it can only buffer alittle at a time, plays a short song and stops, play a piece and short stop... and

  Hello

  Normally the speed depends on your internet connection, Buffering is simply the process of downloading the documents in the file and now it until it can be displayed.

  You can try to configure Windows Media Player:

  1 open Windows Media Player.
  2. right click on the title-> Tools Bar-> Options-> Performance tab.
  3. set the desired changes in the section network buffering.

  Buffering is simply storing the content before the media begins to play. Some will have noticed a short break before the multimedia readings, and it's just data backup application in the hope that small network dips will be not noticed. The ultimate solution is, of course, get more bandwidth. If you are tiring to watch an HD video on a connection by modem 56 k no degree of buffering won't help you unless you download the entire video clip before you play. Get more bandwidth means generally pay your ISP more money for a better plan.

  I hope this helps...

• How to force refresh user OAM changes without having to restart the server?

  Hi people,
  
  I have an OAM authorization rule based on the ldap user attribute (it is url for ldap query under 'Allow access', rule, that is ldap: / /... with a Cache update is enabled) with the hardcoded value, so that only users with these attributes can access protected resources. My problem is that if I add/remove the attribute via the User Manager console, it does not take effect until I have actually restart the access server. I can, however, locking/unlocking the account of the user through Manager users with immediate effect.
  
  Any help is appreciated.
  Thank you, novel

  Hi Roman,

  There is no problem to run OAM identity and access servers on the same machine, with some ports you choose. I suspect that the problem is that AccessGate the identity of the server is (incorrectly) set up to talk to port 6021 - If Yes, this will be reflected in the identity\AccessServerSDK\oblix\lib\ObAccessClient.xml file and can be corrected by running the configureAccessGate command. There are additional steps to get the automatic hunting at work (in addition to the definition of the parameter doAcessServerFlush) - did you follow the documentation for these?

  Kind regards
  Colin

• Possible to have an office unmanaged WITHOUT being part of the field?

  Is it possible to add a desktop computer unmanaged to a manual view pool without going through the Office joins the field?  Or is the 'join the field' an absolute requirement?

  I have a few special use case VM that is not on the field.  Issues, is that the passage in credentials does not work so they must authenticate to view using their ad username and password and then log on to the machine VDI with a local account.

• What is BRetail benefits! You may not know whatever it is without being part and the computer crashes until you uninstall Mozlla!

  Pop up are on your opening page except if you join us, blocking the computer! The only way to fix it is to restart the computer and uninstall anything related to Mozilla!

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• How to type pages 5 fractions

  How to type fractions in 5 Pages?

  Page on the Apple Support communities welcome, fraction of type 5 Pages in the search box. There are abundant results that will help you answer your original question.

• Keyboard problem, when I try to type a part of the end of the words by be numbers.

  I have a Lenovo laptop that worked fine until just now when the keyboard or something does not allow me to type words... when I try, part of the end of the words by be numbers.  No, the Cap or Num locks are not on.  I tried everything I know and nothing works.  All of the suggestions.

  Num Lock is turned on, or the keyboard is defective.  Contact Lenovo to get help, as this seems to be a hardware problem, not a Windows problem.  You could also try feeding completely down, remove battery and AC adapter / CC, replace, then start up again.

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• How can I get speech recognition to type directly in a Word Doc?

  Original title: speech recognition

  When I dictate using speech recognition there is a text box that appears in my Word doc. everything I am dictating types in the first text box and not directly in my Word Doc. How can I get speech recognition to type directly in a Word Doc?

  You can't - this is how it was manufactured to operate.  The speech not the recognition program, then send the key commands to the word, it is literally 'type' for you.