How to understand startup mystery?
judgment of the iMac to 22:00 03:00 the next morning, I hear the chimes. 06:00 start and run terminal command "last" and it doesn't show anything between 22:00 and 06:00.
I need to make sure that this does not happen. I can turn off the ringer, but would rather understand why the mac has fired up this morning.
When I stopped the previous night, I think I was in bootcamp and changed the startup to El Capitan disk before stopping.
Thanks for any advice.
OS X El Capitan 10.11.5
End of 2012 iMac
Intel Core i7 3.4 GHz
32 g memory
NVIDIA GeForce GTX 680MX
Wake for network access has been checked in the settings.
Start after a power outage has not been verified.
Open Console.app and check the messages from the system log and Diagnostic reports.
C.
Tags: Mac OS & System Software
Similar Questions
-
How to understand computer HP pavilion dv6 laptop I use
How to understand computer HP pavilion dv6 laptop I use?
After that, I would like to understand how to upgrade this computer up.
the screen is 17.1 could I use screen multi touch?
It's intel i5
Windows 7
I bought it with the radeon graphics card, but after changing graphics card intel HD 3000 what better map graphics radeon or intel I can insert on laptop?
can I put ram at 8.00 4.00 GB or 16,00 Go?
DV6-6c51er is the common model number.
Here is the Manual:
It can handle up to 16 GB memory DDR3-1333 (2 x 8 GB modules).
No way to add a touchscreen. I don't know how you changed Intel Radeon graphics card, unless you have installed a different motherboard. The original motherboard has two graphics chips, so if you install the right driver you can access the AMD Radeon HD M 7470.
The processor could theoretically be upgraded to an i7, but these improvements are rarely economically justified because of the high cost of processors unique and time required for doing the upgrade. Somehow, I think less than 10% of the improvements that we are discussing on this Forum actually. You simpler and better (more efficient) upgrade is to install an SSD. You will think that you have an i7 and 16 GB of RAM.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
How to stop startup programs unnecessary popingup when I start my pc
How to stop startup programs unnecessary upward poping when I start my pc
How to stop startup programs unnecessary upward poping when I start my pc
First of all, note that you should be in * all * the programs that start automatically, not only with those who are in the system tray. Not all the programs auto-start manifesting by an icon in the status bar.
On each program, you don't want to automatically start, check its Options to see if she has the choice to not start (make sure that you actually choose to not run, not simply a "don't display the icon" option). Many can easily and better be arrested like that. If this does not work, run MSCONFIG from the start. Run the line and on the Startup tab, uncheck the programs that you do not want to automatically start.
However, if I were you, I wouldn't do this just for the purpose of the minimum number of running programs. Despite what a lot of people tell you, you should be concerned, not with the way * a lot * of these programs you run, but * that *. Some of them can seriously affect the performance, but others have no effect on performance.
Don't stop all programs to run willy-nilly. What you need to do is to determine what each program is that its value is for you and what the performance cost is running all the time. You can try searching the Internet and ask questions about the details here.
Once you have this information, you can make a smart informed decision on what you want to keep and what you want to get rid of.
-
How to understand the time VI?
Hello
I use LV 8.6, and I'm curious to know how to understand statistics 'VI time' under the 'profile Performance and memory window.
I let one of my screws "continuous run" for about 5 seconds, but in the profile window, time of VI out 1.17 seconds, while the SubVIs time is 0. If I understand well of the Help window, 'VI time' represents the time spent executing the code of the VI, what happens for the other 4 seconds? It is confusing to me because I did similar tests on other screws (with no subVIs), and it seems the faster of the VI, more time to VI is.
Thank you very much.
The time you see reported is the total of all the slices of the CPU used by the code.
If the VI took 1 msec to start upward, then did a waiting for 1 second and then outputs, you should expect the total duration of about 1-5 ms alothough the run time in total was much more than that.
Ben
-
Original title: computer hangs on restrting have to swich to then restart windows vesta 64 bit how to fix startup journal
Restart the problem have disc windows do not know how to make a boot fix
Hi John McAvoy,.
(1) since when are you facing this problem?
(2) you get an error message?
I want to clarify if this happens when you start Windows after logging in or before opening a session on windows.
Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > restart the computer and check
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you
How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you
After two execution plans that have the same sql_id, so we can see what you're talking about.
See "Oracle Explain Explain Plan optimizer" by Maria Colgan of the Oracle optimizer group
Examine the various aspects of a selectivity to parallel execution plan
performance and understand what information you should be brilliant
the plan can be overwhelming even for the most experienced DBA. This document
offers a detailed explanation on each of the aspects of the execution plan and a
Overview of what caused the CBO to make the decision, he did.
-
How to understand how backup file is belong to what backupset.
Hello
I'm looking for an answer, but impossible to find for a while.
for example, I backed up my system with this command:
and 4 file created for the backup (I guess that my database of approximately 4.5 G and global safeguard is 3. 5 g). There are 4 different files in a backup set after the backup command. I run this command again and 4 more files and second backup.backup database section size 1G;
Now, how I understand of RMAN or dynamic sql, views the backup files belong to what backupset.
in 'Backup list' RMAN command does not display the backup sets (or I couldn't find something in common).
also in sql, it has V$ BACKUP_SET and V$ element_sauvegarde views but I could not find relationship master detail between those points of view. in V$ Backup_Set view I can see the file and backup header information how that backup has to element_sauvegarde V$ RMAN_STATUS_RECID column has the same id for the same backup, but it does not exist in V$ Backup_Set
in particular, I want to see this list in RMAN. is there a solution?
Thanks for help.Hi Mustafa KALAYCI,
This means Hmm so even if there is an ID that is unique about it, I couldn't see it.
I'm afraid you're right.
If I want to spend one of my old backup to a different location, how can I know which files I have to spend?
You can use the handle and completion_time columns in v$ element_sauvegarde or the timestamp of the file OS to identify older files.
(Be aware of old information from rman backup is purged of the controlfile due to pressure of space, check the control_file_record_keep_time setting)http://www.Stanford.edu/dept/ITSS/docs/Oracle/10G/server.101/b10755/initparams027.htm
Not sure why you want to move the files, but if you do you must overlap.
Kind regards
TychoEdited by: tychos February 6, 2011 10:36
-
How to automate startup EBS on Linux
Hi hussein/helios,
How to automate startup on EBS on Linux please.
The customer asked that when they start/stop Linux servers (for example during maintenance or holidays)
There are no need to stop or start the EBS.
Can you give me links note metalink on how to do this?
Thank you very much
MsKHello
See the following threads.
Autostart of Services
Re: Autostart of ServicesAuto startup of the Oracle Services did not
Re: Auto startup of the Oracle Services did not workKind regards
Hussein -
How to understand a dumpfile?
Hello
How to understand a trace dump file?
I got the error ORA-04030. Then by applying the metalink note: 863562.1 I did:
But I don't understand how trace file other than a SR on metalink to open?SQL> alter session set events '4030 trace name heapdump level 536870917;name errorstack level 3'; SQL> run reproducible sql
Thank you.You can't do if you do not belong to group support as they are trained to understand with the meanings explained correctly. These trace files are not supposed to be read by us and created, but they are supposed to be sent to the OSS, when we reached this kind of errors. You need to trigger an SR only if you want resolved as much traces contain memory dumps as well which are not possible to consider rightly so we do not know what we are looking for and what the error?
HTH
Aman... -
How to understand this statement?
How to understand this statement?
What is a public constructor zero-setting
< partitioning/class name key - >: Specifies the name of a class that implements the com.tangosol.net.partition.KeyPartitioningStrategy interface. This implementation must have a zero-setting public constructor.It's a public constructor that takes no parameters. See the following simple class.
public class Platypus { public Platypus() {} //public constructor with no arguments }
-
My compaq is so slow, and I'm trying to understand what programs to uninstall to try sppeed process, among other issues. I am not notified with the office. I'm also, thanked the community for your respose to my first question last week... so far, everything is going well w / windows media player.
Depends on what exactly you mean by "acceleration".
Uninstalling a program is unlikely to have an impact on performance
-
How to understand the context of the sequence of time real labview
Does anyone know how Labview RT to understand the context of teststand sequence? My sequence context is defined as "TS. SequenceContext' like the screenshot in attachment.
If we point a VI for that sequence context then who use VI of teststand? and must add this VI to the Explorer of Projectr of Labview RT system to build the project?
I use 2009 Labview and teststand 4.2.1.
Thank you very much
LabVIEW RT does not support the ActiveX required for TestStand.
-
How to understand the reference trigger as a trigger to stop?
Hello
I tried to use an external signal how the trigger works / stop for analog data entry. I had looked for solutions and above all that they suggest to use a reference trigger. But I don't really understand how it is applied. For example, why it should be set to the number of samples before release? For me, the number of samples that are taken are those between the market trigger / stop... I don't really have it.
Migne
Hello master,
As see you, there is no trigger stop easily available with DAQmx. Indeed, you will need to use the reference if you want to trigger the end of the acquisition. What actually a c of reference trigger on a task must begin a kind of continuous acquisition until the trigger occurs. Then by default you will get a certain number of samples before (before) and after (after release) edge relaxation when you read the buffer after the triggering event.
To read data continuously during the acquisition, you must change a property to change the access mode during playback. You will also need to manage properly reading the buffer has you will certainly get the same amount of samples during the last reading.
Detailed explanation again as long as there are for example--> http://digital.ni.com/public.nsf/allkb/BA775B0E445BFA79482571FE0032CCEB?OpenDocument
-
How to remove startup programs to include information system?
I have two questions:
1. how to eliminate some startup programs - that is to say small icons that appear in the lower right of the screen after the home screen?
2. What does the following error message, and how can I correct: «entry point procedure RegSetKeyValue is not found in the dynamic library of ink ADVAPTI32.dll»
To answer #1 question, you can use the program 'msconfig' to Microsoft
(Start-> Run-> "msconfig")
to toggle the elements that run at startup... but especially for diagnostic purposes.
A better way is to download the freeware from Microsoft "AutoRuns". When you run it, it will show a list of items that run at startup and allow you to uncheck all that you desire.
Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >
No comment on question #2.
HTH,
JW
-
How to disable startup programs?
Original title: how come you at start of the menu I know its
Start menu to disable or enable programs
Yes. Start | Run and type:MsconfigThere is also a startup folder in the start menu. All programs, that's why I wanted to clarify.Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA
Maybe you are looking for
-
card eSATA for Satellite Pro A200GE - 26Q
Hello world I'm new on the forum and laptops computers Toshiba range as a whole, but I recently took delivery of my nice new Satellite Pro A200GE - 26Q. On the surface, it seems a beautiful machine, but here's the question: Like I need reading wav an
-
Satellite A660 - Tempro alerts and the status of the guarantee
I have a laptop Toshiba Satellite A660. Windows 7 64-bit.First Tempro worked but I have not had an update since October 6 and my warranty status now says'Standard Standard warranty Toshiba unregistered'?Think this should happen when Tempro advised me
-
I have a new laptop with windows 7 when I get on facebook games action lages and do not move smoothly is something I need to download or change the settings to make it work smoothly, it does only with games
-
HP envy 5640: unable to print from Word or Excel 2010
After you have installed Windows 10, I am unable to print from my desktop applications. If I print to a PDF file first then I can print. I uninstalled all drivers and programs related to the printer and reinstalled. I chequed firewall, and no solut
-
What do you do when windows and buttons is gray out?
Hi, my name is Rhionna and I have a problem on my Windows XP Service pack 3. Well, last night, I scanned my PC for registry errors there were some and I fixed them, but now I can not apply visual styles. Windows and buttons in properties is grey outs