How to unlock region codes in windows media player

Similar Questions

• Error message DVD region code in Windows Media Player on Windows 7

  Original title: Windows Media Player cannot read my DVD

  I'm reading a DVD that was produced by my company in Toledo Ohio. A pop-up message telling me that it cannot be read in my part of the world. As photography video and DVD recording made in Toledo, I don't understand why it won't play. More when I went to the web for help following the instructions that I was told there is no solutition for this problem. Can you help me?

  Hi johnefalk,

  Try these steps and check the result.
  Step 1: Change DVD region
  a. Click Start, type devmgmt.msc and press on enter to open Device Manager.
  b. double-click on CD-ROM/DVD-ROM drives, click on the DVD drive that you want, and then click Properties.
  c. on the DVD region tab, make the desired changes.

  Note: To configure your DVD drive to play discs from other regions, select a geographic area from the list of regions. As a general rule, you must select the region in which you reside. It is not often necessary to change the setting again.

  Important: The region can change only a limited number of times. When changes remaining equals 1, and you select a new region, an alert is displayed to warn you that after this, you only will be able to play DVDs from that region. Be aware that you will not be able to change the region setting for some DVD hardware and software decoders.

  Step 2: If the problem persists, run the Windows Media Player DVD Troubleshoot utility and check the result.
  Open the Windows Media Player DVD Troubleshoot utility
  

  For more information, see change the region for a DVD Player setting

  See also: , change the country or region setting

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to update region setting in Windows Media Player

  original title: change region on windows media player

  How can I change the region of your windows media player successfully?

  I try to change it and it comes up saying "unable to update region setting. Please insert appropriate media and try again.
  Help!

  Hello
  Look at the packaging of your DVD. DVD region is noted on the back of the housing. It comes to the region, for that you need to change your DVD drive. To do that follow these steps:
  a. click 'Start', followed by 'Computer' or 'My computer', then right click on the DVD icon and select "Properties".
  b. choose 'Material' and select "DVD région" tab click on the region that you want to change your computer DVD drive to, then select 'OK '.
  c. Insert the DVD in your DVD drive and open Windows Media Player. The computer can now play your foreign DVD movie.

  Your DVD player can change regions only five times. The fifth change becomes your permanent DVD region.

  Hope this helps!

• How do adjust you picture in Windows Media Player 11 slide show duration?

  Original title: question of Windows Media Player 11

  How do adjust you picture in Windows Media Player 11 slide show duration? Thanks in advance

  FWIW... If you view your slide show with Windows Picture and Fax Viewer...
  There is a way to adjust the display time of photo.

  The following method will adjust the slideshow 'time by image '.
  for Windows XP - Windows Picture and Fax Viewer.

  Download and install free Windows XP PowerToy "TweakUI".

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows XP downloads
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP
  (Search for TweakUI featured downloads tab)

  When you have downloaded and installed TweakUI... open and
  in the left pane. Expand the Explorer (left click the +) and select (highlight)
  Slide show.

  Change the number to all what you need... then on the left, click apply / OK.
  For example... 5000 = 5 seconds.

• How can I connect burner for windows media player

  How can I connect burner for windows media player, my i tunes CD of burnes and nero, but I am using windows media player

  Hi Tureignjames,
   
  -What version of Media Player do you use?
   
  If the Media Player 11 that you use, follow the steps listed here:
  Burn your own custom CDs
   
  Additional reference on:
  Songs of RIP (copy) of a CD on your computer

• How to restore deleted files from Windows Media Player

  Hi, I decided to use Windows Media Player as a software for my Samsung s3 mp3 player.

  He acknowledged the mp3 player, so I've seen a few pictures, the mp3 player has (thanks to Windows Media Player), but I accidentally deleted.

  Now they are gone, and I can not find them...

  How can we get them?

  Hello Compdumb,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, I found an article that should answer your question.

  How to restore deleted files from Windows Media Player

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to uninstall and reinstall my windows media player?

  When I try to get info from the album I get an error message; An error has occurred in the script on this page.

  Line: 1

  Tank: 243

  Error: Automation server can't create object

  Code: 0

  URL: http://fai.music.metaservices.microsoft.com/FAI/scripts/default.js

  Do you want to continue running scripts on this page?

  Yes No

  When I select either Yes or no box search for album information screen clears and nothing happens.

  I tried several troubleshooting on the help forum suggestions, nothing worked so far.

  Your help would be greatly appreciated.  I have approximately 167 cd rip and file.

  Thank you

  Earl Everett

  If you use Windows 7, here's what you can try.

  You can try this procedure to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turn on / off Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• How can I record music in Windows Media Player and Imesh?

  original title: How do I find my cd burner and conect again to record music on my player windows media and imesh. What should I do?

  How to find my cd burner so I can burn CDs and DVDs on my windows media player once more and my software imesh is gone how can I retreve it?

  Hello

  1. that "software"are you referring? "

  2. what operating system is installed on the computer?

  3. what changes cause the issue?

  Reference:

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  http://Windows.Microsoft.com/en-my/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Provide us with more information about the issue so that we can better help you.

  However for iMesh you can ask your question on the link below:

  http://support.iMesh.com/index.php?/troubleshooter/step/view/2

   

• How to edit album information in Windows Media Player

  Change the Player added 11 songs title: 12 albums from a media.  How can I change the news so the list of songs from the appropriate album.

  Media Player includes now 90 songs as an album - unknown.  I want to separate songs in the correct albums.

  I can't find how to change the association between the song and the album tho.  I tried to drag / move on one and it does not work.

  Hello

  What operating system is installed on the computer?

  You can delete the database that could have damaged.
  To do this, follow these steps:

  Note: I suggest to save the songs and try the following steps.

  Step 1:

  a. exit Windows Media Player.

  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

  c. Select all files in the folder, and then click delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

   

  Step 2

   If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the folder Media Playerand then click delete on the file menu.

  d. restart Windows Media Player.

• How can I put music from windows media player to my 6th gen apple ipod

  I am not able to send my music from my windows media player for my apple ipod 6th gen can someone please tell me how this is done?

  First thing you need to do is import your audio in iTunes, if they are wma or mp3:

  Mac 101: Importing Windows Media Audio in iTunes files

  Then, you must synchronize with your iPod

  Sync your iPhone, iPad or iPod touch with iTunes help...

• How do I put music on windows media player that was downloaded on a Web site?

  I downloaded music from a website called 'www.datpiff.com', and I need to know how to put music I downloaded on windows media player so I can burn CDs

  If the downloaded file has a. ZIP extension?

  If_Yes_open the. ZIP file and another file will be inside.
  Drag this folder on the. ZIP file and drop it on your desktop.

  The following article offers you more:

  (306531) how to create and use tablets
  (zipped) folders in Windows XP
  http://support.Microsoft.com/?kbid=306531

  Now, open that folder, and inside, you see the music files...
  more than likely with. Extensions of MP3.

  Add the. MP3 files to a selection of Windows Media Player.

  Windows XP - Windows Media Player 11 - create and use your own customized reading lists
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

• How to install or upgrade to Windows Media Player 11 in Windows XP computer?

  Original title; Windows Media Player.

  I bought a MP3 player that requires Windows Media Player 11, mining said Windows Media Player. How to install or upgrade to 11 or is it really necessary?

  Hi SueH12,

  The default version of Windows Media Player in Windows XP is Windows Media Player 9.

  You can download & install Windows Media Player 11 from this link:

  Windows Media Player 11 for Windows XP

  Hope the helps of information.

• How to remove the skin on windows media player: windows vista running windows 9

  Well, I wanted a new skin on windows media player, I went to the site of the skin and got a new skin.   Then, the player only plays not write.    You cannot see the controls as fast forword or rewind play or pause.  It makes me crazy ha ha wow.  can you help me please.    E-mail address is removed from the privacy *.

  REALLY? Bud, you must return to school. I can't believe Mircosoft hires idiots like you not wonder that our sh! dosent work right t... HE ASKED HOW TO REMOVE THE SKIN TO NOT BE GIVIN LEAK AUTOUR. TELL US HOW TO UNINSTALL MEDIA PLAYER SKINS!

• error code c00d11c7 windows Media Player 11

  I get this error when I try to rip, burn or syn saying that the required Audio Codecs
  is not installed on my computer. Yet when I check my box of Audio Codecs it is checked?
  Can anyone help please.
  Im running vista Home premium 32 bit, sp 2, IE8 Acer laptop 4 GB mem, 500 GB hard drive

  Hi gerryx,

  Thank you for visiting the Microsoft Vista Forum.

  Please follow it mentioned below as follows:

  1. open Windows Media Player (WMP)

  2. click on Tools

  3. go to Options

  3. Select the menu Music Rip

  4. check if "copy protect music against" checked? If you uncheck the box and re - extract the tracks, it should work fine...

  Also would like to suggest uninstall all older versions of codecs and re - install K-Lite code.

  Hope this information solves your query.

  Let me know if it worked.

  Thank you, and in what concerns:
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• How can I copy albums of Windows Media Player on my computer?

  1. How can I copy and record albums in my Windows Media Player library on my computer?

  Do you mean pull them up in your computer?  or do you mean copy them to media player, so you can play them elsewhere?

  If you want to say, put a CD, select the extract and select those you want to extract.
  If the latter, then go to your music folder and find the album you want.