How to upgrade from individual applications in iTunes 12.4?

Similar Questions

• How to upgrade from DOS applications end after the message transport successful

  Hi all
  We currently have a composite SOA that reads failed (Msg type 3) messages from the queue JMS B2B messages and updates to our business of b2b chess tables. However we do not know how to manage successful transport messages B2B scenarios.
  
  How to back end applications (composite SOA) know b2b messages are processed successfully by B2B? How we capture scenarios of this success? We do not have active ack.
  
  Thank you
  Kathar

  However is there any mechanism push of b2b for this scenario.

  Option #1-

  B2B pushes the details of messages to BAM AQ (B2B_BAM_QUEUE in the SOAINFRA schema) where the BAM takes over the details and post in its data objects. If you use not BAM then you can receive messages from this QA. It is once again a batch and it is controlled by below two parameters:

  Enable BAM
  BAM polling interval

  http://docs.Oracle.com/CD/E23943_01/user.1111/e10229/bb_config.htm#CEGEADFJ

  Option n ° 2-

  Write your own DB job that pulls the view B2B_INSTANCEMESSAGE details and pushes for you at the desired location.

  Only batch is suitable for this scenario because B2B uses a different set of interim during the processing of message while you are only interested in a terminal State (MSG_COMPLETE)

  Kind regards
  Anuj

• How to upgrade the Switch application icon

  Hello

  I'm working on a UiApplication in Java that runs in the background all the time.  I need support the 7290, some 8,000 s and the "BOLD".  The screen resolution is very different between the 7290 and "BOLD" and the icon that looks good on the 7290 seems jerky on the "BOLD". And the icon that seems good on the "BOLD" is not full screen on the 7290, and we know, that there is a problem.  So, I followed the information contained in these two links to update my icon based on that screen resolution that we, to make my icon looks good no matter what device has a user.

  BB in Knowledge Center article - how to set an icon of overview

  BB Forum of Discussion on the overview icon

  Now on the 7290, I use an icon of size 32 x 32 pixels and on the "BOLD", I use an icon of size 64 x 64 pixels.  I know that 64 x 64 is not the recommended size for the "BOLD"... and it looks better for what I do.

  OK, so to enter some details, I have a main entry point, which has an icon associated with it (which is the icon that I have 'default', you can tell).  And it's the icon of my startup code updates (via HomeScreen.updateIcon (getHomeScreenIcon (), 0) and is what you see in the Applications folder (or on the main Menu, depending on what device, of course).)  And on the menu, when you click this icon, it brings my application in the foreground and here we go. It works just as advertised and is great.  I have the icon on the right showing on the right screen resolutions.  No problem.

  Is then where I run into trouble.  I have another point of entry, who calls my startup code and gets my application running in the background.  It has an associated icon also (once again just the icon I want 'default' before I can get the Update icon.  It is the icon that can be found on the Ribbon for switching applications (when the user presses ctrl-esc).

  And once again, in my startup code, I try to use - HomeScreen.updateIcon (getHomeScreenIcon (), 3); -Please note the different entry point number that corresponds to this entry point.  I checked the CAP file to determine the correct entry point number and this update still does not take effect.  I also tried each number from 1 to 5, no chance.  I can't get this icon to update.

  How to upgrade the icon that appears on the Ribbon for switching applications?  And if I can't be updated for a reason, how can I specify a different icon for different screen resolutions?

  Thank you, Tara

  PS. I use JDE 4.1.0.185, simulators and devices of 7290, 8100, 8300, 9000 (Bold).

  The issue of the HomeScreen.updateIcon do not update the icon displayed in the application of task switch has been resolved in BlackBerry handheld software version 4.7.0.  The only work-around from earlier versions is to have several versions of the application that are built with different application icons.

• How to upgrade creative Cloud applications?

  Hi, Ive recently brought creative cloud, but I do not have the icon in the upper right corner of my house in bar (for a mac desktop computer) how to retrieve this in order to update and discovered all the software cloud creatives?

  Sammi117 you can find the details on how to upgrade your creative Cloud update Adobe Creative Cloud apps applications.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• How to upgrade from lightroom lightroom 4 6 (no cloud)

  How to buy an upgrade from lightroom at lightroom 4 6 (no cloud)

  Hi Lisbeth. You can find it on this page: products (search for "Photoshop Lightroom 6", click on "Buy" and you'll be able to select an upgrade).

• How to upgrade from Photoshop CS2 to CS5

  I had been using 2 CS since 2005 and if he's still a very good application I've been frustrated by the need to frequently renew activation. Then removed from my system at the beginning of this year (20100 and used another application.) But after trying CS5 on a friends PC I was impressed and decided to buy the upgrade from CS2 to CS5. I want to kow if I have to reinstall CS2 or can clean install CS5 I prefer. ?

  Onclejean

  London

  Thu, 14 Oct 14:43 GMT

  If you deleted and that you have not used the cleanup utility then you should be able to put CS5 disc and run it. The software will ask for the serial number CS5 and can detect CS2 and not ask for serial number. If this isn't the case, then you must enter the serial numbers.

• How to upgrade your java application using Blackberry desktop Manager?

  Hi all

  How can I update an application using Blackberry Desktop Manager. ?

  because I'm not able to do this by using "Application loader" > editing Application in the Desktop Manager.

  If please suggest me some reference or guide in this regard.

  Thanks & best regards,

  Narendra.

  Did you change the version number? DM will not recognize the program as an update version number increments unless.

• How to print from an application created with adobe dps to my ipad

  I know own Apple iOS applications can print from iPad and iPhone using AirPrint.

  How can I activate the support for printing from Adobe DPS application on an iPad or iPhone

  We do not support printing of DPS.

  Neil

• Qosmio G50-115: how to upgrade from Home Premium to Ultimate

  Dear friends,

  I am a teacher in a local college. We decided to buy the Qosmio (device name: G50-115, device number: PQG55E-01J00GEN, product group: QOSMIO) for our Department. We bought two so far for the trial. But my job is now on the sword.

  These laptops are pre-intstalled with Vista Home Premium SP1 and we need to upgrade these to Vista Ultimate. We have a DVD of Windows Vista Ultimate, but it's without SP1 on it. When I run and update, it rejects the upgrade because the installed version is newer than the version I have. Microsoft is no help, they said that you bought...

  Microsoft advised me to uninstall SP1, but I can't do that because there is no option in Control Panel to do this.

  If I install clean I won't lose nice software from Toshiba. I did a recovery disk, but do not think that I will be able to install this software. If I can download all necessary drivers, but I am interested in utilities/software installed at the factory.

  Would you please advise me what to do. Y did he we can get all the software of Qosmio on a DVD for instalation.

  Kind regards

  Dr. Sophie

  You should try to wake SP1 to the drive ultimate because I think that the problem is due the SP1 is already installed, but not on the final drive.

  You can do this with vLite: http://www.vlite.net/.
  With this tool, you can create your own with integrated service packs, patches, driver installation disc and more.

  Try this, it only takes a few minutes.

• HOW TO UPGRADE FROM WINDOWS VISTA HOME PREMIUM TO WINDOWS 7? (FREE IF POSSIBLE)

  Hi, Im running windows vista Home premium with IE 9 on 64-bit for now, nobody knows if there is a download free windows 7 available to try to improve my system from vista to windows 7? Thank you.

  Hello

  There is no free upgrade to Windows 7.

  There was a special offer to do years back. but this offer has expired for a long time.

  And Microsoft sells more than Windows 7.

  Try Amazon.com.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• How to copy from one Application to another custom Page template

  Hello

  12.1.3 Jdev

  How can I copy a created exculpatory to one application to another?

  I don't want to create the existing application as a jar and add a library to the following. I want to copy an existing template and begin to change in the next request.

  See you soon

  AJ

  Each application that uses the model page, have the file called pagetemplate - metadata.xml, which is basically a repository of page template.

  When you create a page template, some entries are added to this file automatically for you.

  That's why I said lets you create a new model.

  Well, next to the source code of the template page, if the original model have pageDef, you need this pageDef too, so do the same - create Def page for your new template and just copy - paste the contents of the original.

• How to upgrade from Virtual Center 2.5 + SQL Server 2000 to vCenter 4.1 + SQL Server 2008 (R2)?

  I plan the upgrade of an existing VMware Infrastructure 3 (Virtual Center 2.5 + ESX 3.5) to vSphere 4.1, and I'm stuck in the Virtual Center Server upgrade and its back-end database.

  vSphere 4.1 is released only as a 64-bit software, so he needs a x 64 O.S.; This excludes an upgrade the existing server on-site.

  The plan is to install a new Server Windows Server 2008 R2 with SQL Server 2008 (or 2008 R2 if taken in charge), migrate the database and install 4.1 on the server vCenter.

  The question: How can I migrate the database?

  When you perform an upgrade of Virtual Center vCenter 4.0 on-site, the database is automatically upgraded; but this isn't the case when you install a new server.

  VMware provides a utility to clear the existing database and import it into a new server, but it works only for SQL Server Express (which according to VMware must not be used in medium/large production environments); If this is not an option.

  I am unable to find a support procedure to perform this migration.

  Can someone please help?

  Massimo,

  I just went through it and found it to be a little pain simply because I forgot to VMware document simplicity...

  You are right, the 'migration' tool does support SQL Server Express, I don't know why and niether are the two VMware Tech Support Agents I spoke with.

  To anyone reading this. NOTE If you perform the upgrade / migration SQL Server Express via the Migration tool you MUST check the registry DbServerType key FIRST! If it is set on Custom Migration tools will ignore simply stages of database! See this VMware KB article for more information:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1024380

  Yes, it is the States 'failure', what he does not say, it is that the Migration tool will be 'Silencieusement Skip' your database.

  End of Migration tools do call a standard SQL Server T - SQL backup command. YAY! You don't have to upgrade your existing 32-bit vCenter Server, do first just in case backup/snapshot, then run through the upgrade as if you were going to use the 32-bit version in production. This step will apply to any database schema change.

  Build your brilliant new 64-bit server, install all of the bits and then use SQL Server Management Studio to make a backup of SQL Server 32-bit database and then restore it on your new 64-bit server. NOTE: Make sure that all SQL and vCenter services are stopped before proceeding with the backup and restore of the measures.

  After the restoration of the SQL on your new server it reboot and everything will come back to life just as it is only now with all 64 bit!

  Hope this Helps!

  Bill Hilburn, Senior Systems Engineer

  StoneAge, Inc.

  http://StoneAgeTools.com

• How ti upgrade from 32-bit Home Premium 64-bit

  Built a new quad core PC, I advance and now I want to run the 64 bit version of Windows.  Where can I get the 64 bit version? Can I order it from Microsoft, if yes, where? Are there fees?

  Any help would be appreciated...

  Thank you!!!

  Glen

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  If your 32-bit version of Vista is retail, you can order 64-bit to above link for the cost of shipping.

  If it is OEM, you can buy a 64 bit full license.

  32-bit to 64-bit must be a clean install.

  http://www.windowsmarketplace.com/

  http://store.Microsoft.com/Microsoft/Windows-Vista/category/101

  See you soon.

  Mick Murphy

• How to upgrade a DPS application for iOS market?

  Hello

  I have a professional in Adobe Digital publishing Suite license and last year, I wrote an app in iOS market. Now, I would like to update the application with new content and I don't know if I have to delete the previous application or what are the steps to follow.

  Thank you

  Nuria

  Then make the changes to the folio and then go to producer Folio and republish the folio.

  Neil

• How is upgrade from Standard to Enterprise Version - difficult to migrate vm to ESX server for Central storage for use with VMotion

  Hi all

  We plan to upgrade our current system. We have 1 ESX Server with Standard operating system. Adding 2 more ESX Server with Enterprise edition and upgrading of our current business. We have about 15 VM on our current ESX Server. The migration process is difficult to move the virtual machines in storage Central for use with VMotion. I intend to take the ESX 3.5 Fast track class before you start the upgrade. I am trying to plan a project planned for the time to migrate these courses.

  Any guidance would be great.

  Robert

  Here is a link to the plugin - http://sourceforge.net/projects/vip-svmotion/

  The amount of time it will take to migrate the virtual machine online all depends on the size of the drive, the configuration of storage etc.