How to upgrade OME 2.0 to 2.1 + how to restart dell ome?

Similar Questions

• How Reboot/restart Dell Powerconnect 6224

  Hello

  My company has 2 powerconnect 6224, 1 is the master and 1 slave, do I know how could restart/reboot my switch in the GUI?

  Can I use the cli to restart/reboot command and what is the command line.

  Thank you

  Using the CLI to recharge the battery, you must use the # reload command. You can add the number of the switch in the command reload members of chimneys. charge # 1, # reload 2.

  You can also use the command console (config-battery) #initiate failover. This command forces a warm restart of the battery. The unit of backup succeeds the new management unit without clear status of material on the stack members. The original management unit restarts.

  In the graphical user interface, you can reboot the switch with entering the system > general > reset. You can also start a recovery using System > stacking > NSF summary. Initiate failover will begin a warm reboot of the switch.

• How to restart the print spooler in Wnidows 8

  The print spooler is a service that is built into most Windows operating systems. His job is to help control print jobs and interact with the printer. Problems with the print spooler are blocked in the queue of print jobs.

  Sometimes the print spooler stops working or was an error to occur. The following video shows how to restart the print spooler service in Windows 8.

  For similar problems with printing try printing HP and the Scan doctor. It is a diagnostic utility that can sometimes find and solve printing problems. Find and fix common problems printer using HP Diagnostic tools

  I hope this helps someone who has problems with their print spooler or who needs to restart. If someone has a problem to restart the print spooler let me know and include your computer model number and that you use 32-bit or 64-bit of Windows 8.

• My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

  My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

  The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window
  dependent on the spooler of sc config = RPCSS
  net start spooler

  If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• My computer does not restart. It starts, but it does not appear how it restarts. Any suggestions?

  Restart my computer, but it does not appear how it restarts. I am trying to get into safe mode, but I don't see the menus. My

  computer runs on XP. Any suggestions?

  Hi ziggysepthm,

  ·         You see the desktop after that it starts completely?

  ·         Did you check if the monitor is connected correctly?

  Check the monitor cable if it is connected properly.

  Check to see if this article helps you.

  Advanced Troubleshooting for General startup problems in Windows XP

• How to restart the print spooler

  How to restart the print spooler

  Click Start, type services.msc, right-click on "print spooler" and select "start".

• IN UCS how to restart the chassis only or closed is broken?

  IN UCS how to restart the chassis only or closed is broken?

  Here's how you can Deomm:

  (1) make sure that you remove thr blade profiles.

  (2) SAT select chassis # in the Hardware tab-> slot the general tab-> choose to decommission chassis

  (3) wait 10-15 minutes so he can fill

  (4) to discover it again:

  (i) first of all, make sure that the cables are conencted correctly, that is, the IOM A to FI - A and the number of cables are, or more links specified in the strategy of chassis discovery,

  (II) select the OU of the appliance chassis-> select the tab 'Decommissined' in the work Panel. You will find the chassis which you deleted, you can add it from there.

  I'm not sure what you mean exactly by that: 'the GP of A FBI must be 2 not one?

  , / Afonso

• How to restart Blackberry Storm blackBerry smartphones?

  How to restart a Blackberry Storm

  I know that on a Blackberry that has a physical keyboard, the reboot can be done by pressing Alt + caps + DELETE. But since the storm doesn't have a physical keyboard, so anyone could tell how it reboot?

  Thank you!

  If you don't want to use the brute force method mentioned above, here's a link to some good downloads. The download of the first on the list of applications will allow you to reset your BB with the simple click of a button. I like it.

  OTA = over the air phone download

  ZIP = download PC

• HOW TO RESTART WINDOWS HELP AND SUPPORT

  How to restart windows help and support? My windows help and support has encountered a problem. I can't find it in services.msc.

  Hey Anni,

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with the help and Support Windows.

  1. What is the exact error message you are getting?

  2 have had any changes made to the computer before the show?

  I suggest you look in Event Viewer and check if there are other important messages/error codes related to the issue.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Please follow the methods.

  Method 1: you can try to download and install Windows Help program (WinHlp32.exe) and check if it helps you to solve the problem, please visit the link below to download WinHlp32.exe for Windows 7.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=258aa5ec-e3d9-4228-8844-008e02b32a2c&displaylang=en

  If you have problems when installing the Windows Help file, please see the link below.

  http://support.Microsoft.com/kb/917607

  Method 2:

  You try to run the following commands in elevated command prompt and verify.

  a. open the start menu, click programs principally made, select accessories.
  b. right-click on command prompt, and then click "run as administrator".
  c. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  Regsvr32 msxml3.dll/u
  Regsvr32 msxml3.dll
  Regsvr32 /u msxml6.dll
  Regsvr32 msxml6.dll

  Regsvr32 jscript.dll
  Regsvr32 vbscript.dll
  Regsvr32 mshtml.dll

  Restart the computer and try to access help and Support.

  Method 3:

  Run the checker system (SFC) scan files will replace the missing or corrupted system files on your computer.

  See the link.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files:

  http://support.Microsoft.com/kb/929833

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• How factory retore del inspiron to factory using my own made windows 7 home prem recovery disc

  I tried most of the instructions standardized even though I think that recovery / repair disks is may be damaged and cannot find the backup hidden because the user priveliges. How factory retore del inspiron to factory using my own made windows 7 home Prem thanks recovery disc

  See:

  Recovery Partition - create - Forums of Windows 7

• How to restart vmware-vpxa using vMA 4.1

  I would like to know how to restart vmware-vpxa on an ESXi host using the vMA 4.1

  Currently I do with PowerCLI procedure

  SE connect-VIServer "hostname".
  $vpx = get-VMHostService | where {$_.} Key - eq "vmware-vpxa"}
  Restart-VMHostService $vpx - confirm

  But do not know how to do it using the vMA

  By default, there is no canned scripts/utilities to restart some services found on an ESX or ESXi host, but using the vSphere API, you can as in PowerCLI.

  Here's a vSphere SDK for Perl script that does exactly cela and works on vMA - hostServiceManagement.pl

• How to restart vm esx host in different work HA?

  I understand that VMOTION = migration hot virtual machines on esx hosts. So, if HA uses VMOTION, how HA restarts VMs on another esx host when the original, we're out of service?

  I guess it will take to create an another vm on the available host using the same on the san .vmx file?

  IF we were to do it manually, it will be just import a virtual machine to another host on the right?

  Correct me if im wrong?

  A bit confused on the works of the HA behind the scene

  See you soon!

  VMotion and HA are not related or dependent on each other.

  (1) again, this works because the virtual machines themselves live on storage shared and not bound to a specific host ESX (i). ESX implements non-persistent locks on a specific virtual machine, when the host goes down, these locks will eventually timeout. HA will launch the failover, allowing it to reregister the VMs failed and restart. Manually, you can walk through this process by the presence of a virtual machine that lives on the shared storage that runs on HostA, then it turned off and cancel the registration of the virtual machine. You would be so I re-register on HostB and turn on, and voila, you've just simulated a ghettoHA.

  Here are a few extra links/documentation which may be useful for you better understand it:

  HA said:

  http://www.VMware.com/products/VI/VC/HA.html

  http://www.VMware.com/PDF/ha_datasheet.PDF

  vMotion explained:

  http://www.VMware.com/products/VI/VC/VMotion.html

  http://www.VMware.com/PDF/vmotion_datasheet.PDF

  (2) vMotion as you know already, performs a live migration of a virtual computer between two hosts, where as HA you will get some downtime of the virtual machine while it is rescued. The key is HA doesn't provide true high availability, it's just faster to recover. If you are looking for a true HA, take a look at VMware FT www.vmware.com/files/pdf/resources/ft_virtualization_wp.pdf

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to restart the BI Publisher application?

  I see often demand to restart the BI Publisher application manual playback OBI, for example after installing attached schema. But I'm never clear what is the BI Publisher application and how to restart it. I saw a thread on start the WIndows service. As for Linux? I was able to restart the oc4j, but that stops all BI servers loaded in it. Is it possible that just restart Publisher but leave the other component BI as responses to the top of race?
  Thank you

  Go to the Manager of the company. BIP is completely deployed on OC4J (which is an application server)

  With a basic installation, you can find it here:
  http://hostobiee:9704 / em

  You have a tab in the app, click on xmlpserver as an application, and you will see a button to restart.

  See you soon
  Nico

• How stop/restart the listeners during the upgrade?

  How to suspend and resume all headphones on the Ironport?

  Upgrade documentation States the following in steps 3 & 9 but I can't find any functionality to suspend or resume listeners.  I use the GUI:

  The upgrade to version 8.0.1 AsyncOS

  For the AsyncOS 8.0.1 version, please follow the instructions below to upgrade your Email Security

  device.

  Step 1 Save the XML the IronPort appliance configuration file.

  Step 2 If you use the lists reliable/Blocklist feature, export the database of reliable/Blocklist lists out the IronPort

  device.

  Step 3 hang the headphones.

  Step 4 wait for the queue to empty.

  Step 5 the System Administration tab, select the upgrade to the system page.

  Step 6 click the button updates available. The page refreshes with a list of upgrade AsyncOS available

  versions.

  Step 7 click Begin Upgrade and your upgrade begins. Answer the questions as they appear.

  Step 8 after the upgrade has completed, click Restart now to restart your IronPort appliance.

  Step 9 repeat all listeners. The upgrade to version 8.0.1 AsyncOS

  There are suspendlistener and resumelistener commands CLI, connect to the command line interface, and these commands will prompt you to any required entry.

• How can I stop FastAccess 2.4.97 nagging upgrade me to version 3, whenever I connect to my Dell laptop

  I upgraded to FastAccess 2.4.97 and since then I am harassed for upgrade to version 3, whenever I connect to my laptop Studioxps.

  This equipment is used for commercial purposes, and this is not the behavior I expect software used in this context.

  Apart from making FastAccess and the laptop looking for sticky, she also questioned my credibility in shoosing software which you nags every time that you start it

  I have two choices, will keep nagging Dell/SensibileVision for a fix or uninstall FastAccess and at the time that it I'm lost to an uninstall.

  FastAccess nags several times after the upgrade to 2.4.97 and then stops - so the irritation is short lived