How to use the Windows 7 recovery discs!

Similar Questions

• How to get the Windows Vista recovery disc

  original title: I do not HAVE MY DVD/CD for MY WINDOWS VISTA RECOVERY. WHAT SHOULD I DO? I NEED TO RE-INSTALL MY PROGRAM, BECAUSE I FORGOT MY PASSWORD OF WINDOWS LOGON. PLEASE HELP__

  NEED HELP TO PROGRAM RE-INSTALL WINDOWS VISTA. I FORGOT MY PASSWORD OF WINDOWS LOGON.

  MARITZA

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s of the recovery Partition in case of hard drive failure or System Crash, about what you are up and running again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to use the rescue and recovery and product recovery discs?

  Hello world

  I just recently became a new owner of a T61 and really enjoy. I did have a chance yet to test the hotline of lenovo, as I've not yet screwed anything up if badly needing their help. I tried a factory clean reinstall from the service partition and it worked fine. I would like to know, how one uses it the rescue and the recovery boot disk and the recovery disks of the product I created myself? From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  art140 wrote:

  From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  1. Place the rescue and recovery disc in the drive, and then restart.  This disc contains the same program that you used when you restored your system from the service partition.  Once the program is loaded, you will see the same screen with the same options as before.
  2. Choose to restore your system as you did with the service partition.  You will not see an option to do a custom restore.  When the program is run from the disk, it automatically performs a full restore.
  3. The program will rebuild the service partition and copy the program files on him.  When you are prompted, insert the product recovery disks.  The compressed system and application files contained on these discs will be copied to the new service partition.  Once the copy process is completed, your system will be restored from the service partition.
  4. After restoration, you will be able to make a new set of recovery discs if you wish.  You will also be able to do a restore custom through the service partition.

  Don

• How to use the windows fax machine and how to open an administrator account?

  How use the windows fax machine, and how can I open an administrator account?

  Original title: activateadministratoraccount

  Hello

  Thanks for your posting in the Microsoft community

  Well, you can enable the administrator account hidden instead of an account

  You can make the win + r and write lusrmgr.msc in the start search box or in the command run and pressing ENTER. Or, you could open the computer by right clicking on computer management in the start menu and select manage.

  Expand System Tools > local users and groups > users.

  Right-click the administrator account, and then select "Set password".

  In the 'set password' click 'continue '.

  In the "set password" enter the password of the administrator twice, then click on 'Ok '.

  Then, activate the administrator account. Right click on the administrator account and select "Properties".

  n check the box "account is disabled". Click on the Ok"" button.

• Trying to figure out how to use the Windows calculator to convert a basic number of 50pico.

  I can't find out how to enter to the power 10 - 12. When I type exp it evokes 10th + 0, I want 10-12. I also can't figure out how to use the brackets and parentheses, I tried to use help and can not find an answer for what I am trying to do. I need to convert a number of basic rating scientist 50pF.

  Thank you, Doug

  I found the answer to my question.  When I clicked on the button in the calculator of + /-he would change 50 * 10 + 12 to 50 * 10-12 and give me the answer I was looking for.

  Doug

• How to use the windows 8 messaging app

  Hey

  I have several family members and friends using windows 8 and what I want to do is add to the mail app so that we can discuss. I see when I go in there I can add people using the windows live Messenger service? I would add other windows 8 users too this list so I can chat with them.

  The problem is that the only way I can add people is via Facebook and I do not have Facebook. This app is designed only for Facebook?

  Kind regards

  Chris

  FYI the Messenger App was removed from Windows 8.1 and replaced by Skype. It's probably just a matter before being replaced in Windows 8.0. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to pick out - something in itself, we find it hitched to everything else in the universe." -John Muir

• NB500: How to use the DVD of recovery without a DVD player in the netbook?

  Background:

  I have a 500 NB of Netbook that came with a Win7 Starter. I've upgraded to Win8 but doesn't like the wsn can't resolution screen high enough to open applications. The system became slower and slower like time, I decided to reset the device back to the original settings by using the Win8 function.

  Progress in this process has been extremely slow and after seven hours (60% in fact) I had a scare that the content of my HARD disk can be copied somewhere on the web (cloud of NSA?  :)).

  I turned off the unit and then nothing would no longer work. I bought the recovery software with WIN7 Starter of Toshiba Support that I couldn't find an ISO for WIN7 starter file, but it happened on a DVD...

  I have:
  + NB 500
  + Toshiba Recovery DVD
  + Bootable USB stick (I created this)
  + Product key for Win7 Starter

  Question:
  What files are required to install Win7 from scratch (move files from DVD to the USB bootable)?
  This procedure deletes old data from the HARD drive or will it take space?

  Concerning
  LS1 - d

  It is not just that you think it is. As much as I know, you can't manipulate the data of recovery and work on your own boot media.

  A better and easier way for you is to get somewhere external USB ODD and use for installation of recovery image. I NB520 and I bought external BD ODD and can use it for various actions such as the installation of the software for example.

  I m wondering really you didn't create recovery USB drive. That was my first step after I bought this machine. Product key you have on the Microsoft sticker doesn't help. You can't use it for OS installation if you are using the version of the OS clean and you don t need it if you use original recovery image.
  After the installation of recovery image pre-installed Windows version is correctly activated.
  > Will this procedure remove old data from the HARD drive or will it take space?
  Yes. The whole HARD disc will be deleted so until you start with the installation of backup recovery image all your important data.

• Copy the file fails the Windows 7 recovery discs sent hp

  I have tried to solve this problem for a month now and I'm at the end of my home.
  I am now on my third set of recovery discs HP and all have the same problem. I insert disk 1 by following the instructions on the support forum. She's going through
  Reformat the hard drive windows partition - tick
  Copy of the files needed to restore the hard drive - tick
  And immediately as ending, this window appears:
  Reducer
  Copy the file fails
  From: E:\PRELOAD\BASE. STORMWATER MANAGEMENT
  To: C:\RM\Image\BASE. STORMWATER MANAGEMENT
  Press OK to retry
  
  Three series of drives have the same come.
  What the hell is happening?
  I'm so sick of this.
  
  Read a few other posts with similar problems, but can't seem to find the solution. I don't have an external hard drive, I can use... only the laptop I'm trying to fix. (G6-1305sa)
  
  Any help? It also doesn't help when the HP support is open on the phones until 5:30 from Monday to Friday. I'm at work so can't call. So frustrating...
  
  Aaaarrrrrgggghhhhh

  Hi Belj,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-1305sa Notebook and not able to restore Windows. If the HARD drive is faulty, this can cause the restoration should not go well. You can try to run a test of material. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices. What is the original HARD drive? Have you replaced all other parts? Have you tried to do a clean install of Windows 7. Try running sfc/scannow would scan your system to find errors on the command line. You can get to the command prompt by clicking F11 at startup. You can see this Microsoft document on the system recovery options.

  Hope this will help.

  Thank you.

• The upgrade using the Windows 7 installation disc

  My OS is Windows Vista Home Premium SP2 x 64, and I intend to upgrade to Windows 7 Ultimate x 64 using the installation disc.
  Is it possible to do this (without the dual boot or formatting)?
  If so, are there disadvantages (i.e. lose any saved configuration, data stored or installed program)?

  First run the Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  How to upgrade from Vista to Windows 7 Edition Home Premium:

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

  Note: Create as always a Vista of the Image backup before you start. Use a backup software utility that works in both Vista before the upgrade and once you upgrade to Windows 7 to create another backup.

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  J W Stuart: http://www.pagestart.com

• How to use the Windows character map with the Arc keyboard?

  When I "Select" and "Copy to Clipboard" character as a checkbox and then enter any rich text field, it is for some unknown reason, out with the bad temper, that I did not choose. I don't think it's related to the Arc keyboard fault, since I do it only with my mouse ArcTouch.

  My "copy to clipboard" feature has always worked well in the past until I installed this Arc keyboard and the copy function continues to operate properly with anything but Windows XP Pro SP3 32 Character Map.

  So I want to try to enter a character by typing the standard code for the character... but the Arc keyboard doesn't have a "Numlock", because it does not have a dedicated digital keyboard and by the statement, you cannot use the number keys "at the top".

  "Product Guide" for the Arc keyboard is not very useful except on how to plug it in 28 languages.

  Is there a work around these two examples?

  Thank you.

  Someone told me that you can not add whatever it is wiped from the map of characters in a field of type text such as Notepad, that she must be rich text applicable as Wordpad. Not true..., I guess?
  Oh well, it's here where I got to go to... [Is it safe? [I'm going to cross that off my list].

  I forgot to say in the last post, & slipped a character of the fonts map does not either, on most of the trials if he drag & drop is of course the bad character and it is not just "Wingdings", but several I tried.

  When you say "characters in some fonts like"Wingdings"and"Symbol"will not display properly if changed to a different font - even if the code is correct."

  Can you help me understand what that means or how that could happen or what I can do to change the font?

  When I choose a check mark in the Wingdings font and then enter it here, it's: [u]. I don't know I wasn't looking to change police in Wingdings to something else between selecting and placing it here.

• How to create the Windows 7 installation disc

  Hello

  I just got my new HP Pavillion g6, but it came without the disks. It has Windows 7 on it and I would like to create a Setup disk in case I need to reinstall the system. I also need to create a disk with all the drivers for the hardware.

  Thanks for any help

  Hello

  Make sure all your backup files before you restore the computer/PC laptop to factory State. If you use the original hard drive and have not deleted the recovery partition, your machine must have a recovery partition.

  To set your PC/laptop to factory State, restart the PC/laptop. HP welcome screen, press the F11 key to start the recovery process. Follow the instructions on the screen.

  Good luck

• How to use the Windows credentials

  I feel like a complete model, but no matter what I try I can not it works. I want to be able to do is save my login information for each of the sites I use. I'm afraid, that I need a black and white-point Blank explanation-knowing exactly what I put in the box. Sorry, but this technology has long passed me.

  Hello
  1. are you referring to how to save your user name and password when you log on the Windows operating system or are you referring to save the password and usernames you type in different websites in your browser?
  2. what browser do you use? What is Internet Explorer?
  You can make Internet Explorer remember your connection and the passwrods by using a feature called Auto complete. See the following article for more detailed information:
  Fill in website forms and passwords automatically
  http://Windows.Microsoft.com/en-us/Windows7/fill-in-website-forms-and-passwords-automatically
  You can also use Windows 7 Credential Manager is to remind the user names and passwords for computers, websites, or network comptuers. See the following article for more on this topic:
  Store passwords, certificates, and other credentials for automatic logon
  http://Windows.Microsoft.com/en-us/Windows7/store-passwords-certificates-and-other-credentials-for-automatic-logon
  Hope this information helps.

• How to use the windows firewall, to block the software on my computer to access internet

  When my computer is connected to the internet, other software installed on my computer connect to the internet without my knowledge. I want to stop this and want windows firewall to ask me whenever a program tries to connect to the internet. Please help me

  It will take some serious reading on your part.

  You can configure the Vista Firewall to be a two-way firewall; and it's very good.

  Read all the info in the link below:

  http://articles.TechRepublic.com.com/5100-10878_11-6098592.html

  At first glance, the Vista firewall seems to be identical to the Windows Firewall in Windows XP SP 2. But once you learn the secret to access its configuration settings advanced through the MMC snap-in, you will be able to configure and customize outbound and inbound rules to adapt to your specific needs.

  See you soon.
  Mick Murphy - Microsoft partner

• I had to use the windows XP Recovery disk. Now I have not any ability to speaker, embedded or not. How can I recover this feature?

  I need to do things that require a speaker, but I have no more of this ability.

  I need to do things that require a speaker, but I have no more of this ability.

  The "speaker" icon appears in the system tray? If this is not the case, check the device mgr to make sure that the driver for your sound has been installed.
  http://support.Microsoft.com/kb/283658

• How to use the external drive recovery with ODD?

  Hello

  I need to recover my Toshiba laptop via original Toshiba recovery dvd, but my internal dvd ram does not work, then, how I upgraded my pc to search for external dvd ram when windows starts? I followed the instructions and the C button when starting the computer, but when I press F12 boot any drive, I select my pc starts just windows...

  Thanks for your help. J. Hlavsa

  Hello

  Your laptop is old laptop model and OS can be installed using recovery media only.
  External ODD cannot be recognized as boot device and you won't be able to use it.

  See operating manuals and there you will find a list of all compatible ratings, buy one and replace.
  Replacement isn't complicated and you can do it alone.

  If you need help let us know.