How to use an external microphone, using the speakers (like using external speaker?)?

I'm trying to use the microphone to an external webcam (logitech C200), which is connected via USB to the laptop (vista, service pack 2). Now the broblem is that I managed to get the external speakers that are connected through the socket of the enclosure, BUT I can't for the life of do me use the microphone on the external webcam. He keeps trying to use the microphone internal cameras (those integrated) instead.

I tried to disable the internal camera (which now allows me to use the webcam) and I even tried to disable the internal microphone, but who also disbaled speakers (includes those used through the socket).

I'm at a TOTAL loss, how to solve this problem, I know you can do what I want, I just can't for the life of me get by.

PLEASE HELP ME< any="" and="" all="" suggestions="" will="" be="" gladly="" accepted="" and="">

THANK YOU FOR YOUR TIME AND THANKS FOR ANY HELP I RECEIVE!

BJ!

Try this:
Go to control panel, double click sound. In the recording tab, you should see the icon of your microphone with a green check mark on the subject. If there is no checkmark, it means it is disabled. To activate the Microphone, right click on Microphone and click Activate. If you do not see the Microphone in the list, right click on the white space and select devices see the disabled. Then, you'd see the Microphone. However, if you don't see the green check mark on it, right-click on it and click Activate. And also to select Microphone and click the set as default below (if defined as default button is active).

Now, set the microphone sensitivity level:

1. Select Microphone and click the properties button.
2. click the levels tab and adjust the slider to the right for 50 to 100% of its range.
3. If the mute is enabled, click the button mute to reactivate the device.
4. If the Microphone Boost is available, amplify the volume.
5. click apply and then OK to make the changes.

I hope I could help

Tags: Windows

Similar Questions

  • How to properly edit a selection before the economy like an alpha channel?

    I thought I could just use QuickMask to paint manually with 100% black or white to 100% to set the boundaries of the selection and then save this final selection under my alpha channel.

    However, I discovered that when I do that, I end up finding a strange artificat ish (which by the way, I can't understand how to remove it).

    I would be grateful if someone could tell me how I should be correctly change the selection before you actually save it.

    Thank you!

    Capture.JPG

    You're not painting with a pure black:

  • Anyone know how to tag a contact plate at the top like you might iView Media Pro?

    I am new to Lightroom and think about the upgrade to LIghtroom 2, since I can get CR4 and LR2 priced package.  Thought to stop using iView to print contact sheets and start learning LR.  A feature that I like and my clients are accustomed to is to have a line of copy to the top

    a Board-contact, which describes the customer, the event, the date, and what folder and what DVD consult these special tiles.  Anyone know if it is possible to have a custom info line at the top of the page?  No metadata, not a page number as in the lower right corner, not a watermark.

    Such a device exists in LR2?  Thanks for any help that anyone can give!

    Here's an example of what I'm talking about this iView allows me to do.  I don't want to buy Microsoft software now that they bought iView.

    In the right of the Print Panel, look at the identity plate and overlays. Right click and choose Edit. You can then create a title and place it where you want.

  • Media Player - how to get to play sound from the speakers

    I believe that I have can I have deleted a device to play the sound on my speakers. I just want to know how to get my speakers to stream audio again?

    Hi Margaretmac Millan,

    1. what operating system is installed on the computer?
    2. don't you make changes to the computer before the show?

    Method 1
    I suggest you to run the fixit from the following link:

    Diagnose and automatically fix the audio problems and audio playback
    http://support.Microsoft.com/mats/AudioPlayback/

    Method 2
    I suggest you try the steps from the following link:

    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 3
    If the problem persists, then I suggest you to perform system restore to the date it was working fine.

    System restore
    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  • How to set sound to play from the speakers?

    original title; Sound on laptop

    A piece of the headphone jack is stuck inside my laptop, which means that there is no sound. I tried several times to get out of the room, but it is very small and is totally stuck... Is there a way that I can change the sound so I can hear directly from the laptop instead of sound is 'play' in the room by the helmet?

    N °

    Normally, there is a micro switch associated with the sicket phones that once you plug the laptop speakers turn off.
    Better to take the machine to a pro out little said.
    See you soon,.
    Jerry
  • Flag r-110 all-in-one: how to use the microphone internal hp r-110 all-in-one

    I know where the internal microphone, but how to use it? I always had an external mic in the past. My r-110 HP all-in-one is new so still get acquainted with it. What I need to set up the microphone and if yes, how and where. Win 10 has a configuration of mic with voice training / recgonition, but it does not show internal mic as a choice so I'm stuck! I would try to make a recording of the voice, but have no idea how activate the microphone. HELP and THANKS

    @terrib

    System is (perhaps) one of:

    Results for ' Pavillion r - 110 all in one " (51)

    Select System > product Home Page >

    Product information > category: specifications

    Form example:

    20 - r110d of HP TouchSmart all-in - One PC product specifications

    Microphone and Webcam are located at the front of the computer, along the top edge (top of the screen).

    If your taskbar contains the small speaker icon,

    Right click on the speaker icon >

    Playback devices > recording >

    Check / confirm that the "internal microphone" is selected as the default device

    You can also find the control of 'His' in:

    Control Panel > display icon > Sound

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Portege R500-11Z: how to use the external mic and hear the internal speakers

    We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

    When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

    How to use an external mic and still hear the internal speakers?

    Hello

    > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
    Are you sure you used the microphone port and no headphone port?

    Have you checked your settings Audio from Skype?
    There is an option called ring through the speaker too or something like that.

    Please also check the Realtek HD audio Manager in Control Panel.
    There is a tab called Audio i/o.

    Usually, you can change the connector settings, by clicking on the small key-tool icon.
    Disable the option called Mute rear output when plugged headphones before

    As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

    By the way; There is also a tab called micro.
    Check if the two options that reduce the echo and noise are OFF

  • Satellite L650: How to use the microphone jack to record audio player

    How can I use the microphone to the input and the audio recording from a record player or a tape using the output of the headphone jack of the player?

    Output audio to the speakers is OK but record is severely distorted.
    OED017 of computer L650.

    Hello

    Taking microphone does not support line-in entry that allows to record the audio stream to a device.

    You can use the external microphone to record Mono sounds in your applications. It also allows to issue voice commands for applications that support these functions.

  • Qosmio F20: How to use the microphone internal?

    Good, my second and last question (I hope).
    The F20 was a "microphone".
    How to use it?
    Does this mean that I will not need an external microphone at any point?

    Hello

    It would be very interesting to know the name of your Qosmio F20 - xxx, because there are many F20 with a different hardware configuration.
    I found some Qosmios F20 without the internal microphone on the Toshiba site.
    In this case, you can only use an external microphone.

    But if you laptop should internal microphone, it should be possible to enable this feature under control panel sound and Audio Devices tab, Advanced button Volume.

  • You can use an external microphone for the animation of the character of adobe.

    I searched the internet and I can't find a way to use an external facilitator of adobe mic, so background noise is not as bad and my voice will be heard better, I used the mic in other software and it works as it should, so my question is can you use an external microphone for computers in the adobe character animation If so, how can you do?

    Yes, I use a USB microphone all the time. It should detect it automatically, but if not, you can go to the host character > preferences and select as input device.

  • How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

    How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

    Version OS X?

  • How to use an external microphone with lifecam?

    Original title: lifecam mic issue unresolved

    I have not found a viable answer on how to use a different microphone with the lifecam. The construction is far away from me. I look six miles away. The camera is great for sure, but he's obnoxious I can't choose my mic source. Can you help me?

    Hello

    You can change the audio source to the other microphone on the application you're using. You will not need any additional software to do this. Also check your recording volume control. You may be able to change this for all applications.

    You can also view: set up a microphone: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/speech_setup_microphone.mspx?mfr=true

  • How to record what is happening by the sound card without using the microphone to avoid loss of quality.

    I tried, but there is no "Stereo mix" available options. There is only the (Conexant High Definition Audio) Microphone. It did not work. What I'll do is to buy a DVD for TV (tv Record program) burner and plug the hdmi cable from my computer to the DVD recorder and record what I want. After that, I just rip the audio from the file. I see no other option to do. I use windows vista Home premium.

    I would like to know how I can record the sound that is played by the soundcard using Vista without using the microphone as a source. Let's say the audio is played (audio stream) and I want to record this stream. There are many software that we can download that record what is happening in the microphone. The sound bounces off the speakers to the microphone. But when this happens, you lose a lot of the quality of the audio. So my question is if it is possible to record what is happening to the right of the sound card, before being sent to the sound card in order to avoid the loss of audio quality.

    ==============================
    Movie Maker has an option to record Narration...
    (Tools / tell the chronology). If you select stereo mix
    as the "Audio Input Source", you can save the
    Audio online. Your speakers and microphone are
    not required.

    And... maybe this link will help:

    How to record Internet radio stations on Windows Vista (using Audacity)
    http://www.ehow.com/how_4604071_record-Internet-radio-Windows-Vista.html John Inzer - MS - MVP - digital media experience

  • How to use the heartbeat detector in LPX?

    Is it possible to detect a beat played by a real drummer, say, with a microphone on the upcoming kick on the interface audio (?), in order to synchronize LPX his rhythm?

    How can this be done, step by step?

    Record of the bass drum.

    Use this track as the source for the detection of the time.

    Cannot be done on-line, must be a recorded track.

    http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcpdbf0ae77

  • How to use the adapter USB Y with disk HARD 500 GB V63700-A

    Hello

    My V63700-A500GB external HARD drive is hard to work into my USB2.0 4 port adapter.

    I thought that maybe he needs more power goes into it.
    So I bought a USB - Y, but I can't find out how to use it.

    It has 2 male son of USB connector and a very narrow little that's not in taking wide slim HDD above.

    Anyone who uses these things to advise me how to?

    ... Thank you
    .. .Nick

    Of course you bought the wrong cable.
    I guess you need a USB 3.0 cable similar to [this | http://datalocker.com/wp-content/uploads/2013/09/usb3_cable_white__800px_wartermark.jpg] a

Maybe you are looking for

  • How to automatically generate memories

    Upgrade to Mac OS Sierra, I decided the new updates of Photos of the evidence. But after you import a lot of images (which have been distributed in files) pictures has not created memories for these photos. So, how could I apply Photos to automatical

  • Read/write in a variable using its refnum

    Hello I and VI and a Subvi. In VI, I have a Boolean variable a reference to this Boolean variable. The Subvi have entrance to this reference (see examples). Now, that's my question, in the Subvi can read and write the Boolean value of the variable in

  • Can't recovery my HP laptop please help

    Hi, I have an Hp laptop (model: G62-340US) that I bought in 2009. Finally, it crushed in 2012 and has conducted the test and repeated my system without a reboot disk features. He told me to press F11 to recover my system, but it does not work. I did

  • / Error blue screen uncertain

    original title: blue screen of death/error uncertain - please help thanks Hope you can make me feel better if possible, or help, I installed Java update when my screen went blue and said my computer had to be closed & restarted. If this happen again

  • BlackBerry smartphones when bb connected to the laptop, no record appearing to load music, images etc.

    I have my bb for a month in mind. the first day I got it I plugged into my laptop (mac, if it makes a difference). a folder appeared, I loaded some images and music. so I left it there... I wanted to connect to my laptop today, however, there was no