How to properly edit a selection before the economy like an alpha channel?

Similar Questions

• How can I edit HTML source in the composition?

  I often compose emails that contain bulleted or numbered lists multi-level, images and other elements inserted. Sometimes, Thunderbird fails to go down to the correct list between paragraphs or breaks, or it crashes or removes the part of my message when inserting an image. I found workarounds, but it would be helpful to me if I could see the HTML code and manually change in composition, as I can with the received messages (view > Message Source). I have not yet found a way to do this.
  Otherwise, I could compose the message in Dreamweaver and copy it into my e-mail, but I could create some tags that are not supported by Thunderbird.
  Please suggest how I can edit the HTML code before sending my message.
  Thank you
  -Richard

  A quick way is to select the body of the message (Ctrl-A to select all), then insert/HTML. Alternatively, use an add-on like EditHtml. As you suggest, copy html to an external editor is likely to cause problems.

• Select before the last character.

  I have some URLS in a picture like this

  http://test.com/ABC/ghgh.html

  http://test.com/BCD/

  http://test.com/FFF/default.aspx

  http:// test2.com/a

  I want to select all the items before the last.

  But if the last / is it after the .com can get just how it is.

  so before should translate into

  http://test.com/ABC

  http://test.com/BCD

  http://test.com/FFF

  http:// test2.com/a

  create table soqs2)

  URL varchar2 (50)

  );

  insert into soqs2 values ('http://test.com/abc/ghgh.html');

  insert into soqs2 values ('http://test.com/bcd/');

  insert into soqs2 values ('http://test.com/fff/default.aspx');

  insert into soqs2 values ('http:// test2.com/a "");

  SQL and PL/SQL are the same forum...

  Check my last response to your original thread select prior to last character /

• dynamic action... How to make date is always before the "to date".

  Hello
  
  using a form, I ask my users to provide the dates...
  
  can I know (step by step) how to set up a dynamic action so that if it dates back to article P20_FROM_DATE after P20_TO_DATE then an error message to be generated...
  
  Thanks in advance

  OK, let's start again. Delete your current setup you date pickers and try these.

  P22_FROM_DATE settings

  Display on focus
  View other months Yes

  Use the same settings for P22_TO_DATE.

  Create a dynamic Action called say, Compare the Dates

  Event Before the Page is sent
  Condition Expression of JavaScript
  Value $v(P22_TO_DATE')<>

  Real Actions
  Action Draw the attention of
  Fire when the result of the event is True
  Text The date cannot be less than this day.

  Another real Action
  Action Update fixed
  Fire on the loading of the Page Checked
  Assigned to elements Selection type Article (s) P22_TO_DATE

  Jeff

• How to create a 2nd selection using the elliptical selection tool

  I try to create the outer edges darker IRIS with the elliptical selection tool. I am trying to elect the iris and then create another selection of the iris 2nd with the elliptical selection tool. This does not work for some reason any. I work from the examples and exercises in the book "Portrait Professional retouching TECHNIQUES for photographers using Photoshop" by Scott Kelby. But for some reason, the tool does not work and I'm going through the procedure of Scott Kelby said to do. After I have selective elliptical selection tool, I do a circular selection around the Iris then after I adjust the size of the selection, I go to the "Sélection" menu and choose "MAKE SELECTION" then, command - click a selection handle to help it adapt to the Iris; Then I press on and hold down the SHIFT key and select the other Iris. This allows you to create another selection on the 2nd Iris. This is the part that is not work - the creation of the second selection on the 2nd Iris.  can someone help me with this problem?

  Too bad I found that I had to have the selected squre which has been added to the chosen SELECTION. When I did that I could add to my selection

  Sent by the assets of Samsung Galaxy S® 6, an AT & T 4 G LTE smartphone

• How to insert a &lt; script &gt; code before the &lt; / head &gt; tag?

  I would like to insert a < script > code inside pages of my site, and it should be placed before the < / head > code.

  Can I handle this with muse? Otherwise, every time when I export the site in HTML, I need to open the files updated and copy and paste the SCRIPT code in the HEAD again.

  Adding scripts to the head section of your documents is not currently supported in Muse, however it is planned for future versions of Muse.

  You can add links to the scripts by using the object-> Insert HTML code, but it will be inserted at roughly the position of the element in HTML page.

• Images added to the timeline lost their alpha channel

  Hello

  I use first elements 11.0 and added a few png-imags chronology (in another channel the film imported). Each image has a completely opaque pixels and a part with completely transparent pixels. Initially, he appeared fine exactly as I wanted it. But when I added the fourth table, or so, all transparent pixels in black images.

  Images look exactly the same source. I tried to save their new with Photoshop and Paint.NET. I tried to delete a photo and add it again. I tried the first Elements of closing and opening it again. Somehow, nothing worked.

  I checked him 'interpret' the film - window and there is no check mark in front of 'Ignore Alpha Channel' for one of the images.

  I hope someone here can help me ;-).

  Thank you

  Gordian

  Why workded the first several of PNG, but has stopped working, is a mystery to me. The only thing I can think of would be if the pixel x pixel size of those of PNG is large, there may be a problem of resources, when enough are added to the timeline. What are pixel x pixel size of PNG?

  The film and all the images have a resolution of 1920 x 1080. I use Windows 7 Professional x 64 with 8 GB of RAM on an SSD. All project files are found on my HARD drive (internal).

  In the meantime, it is good that you have the solution to workaround to use PSD with transparency, to get your project done, but I am surprised by the behavior of your exposed PNG. A riddle for me.

  That's what I did: I opened the png files in Photoshop CS 6 and saved once again that the psd files. Then, I used 'Replace the sequences' in Premiere Elements to swap files png to psd files. It did not work, the transparent pixels in fact everything went black.

  I wrote that I had success with a new psd file - not with the images I actually wanted to use.

  I don't really know why, but I had to recreate the images from scratch again once (Fortunately, it wasn't that difficult or time-consuming). I saved them as png again files (because I do not really see any reason why that should not work) and imported. This time it worked as it was supposed to. But I can assure you that the new images had exactly the same as the 'old' pixel data.

  I guess it was some cache error. I said not a part of the story, because I thought it was irrelevant. When I had five of my pictures working properly, I used a png on the source files compressor (I had a backup of them). It compresses a third of the original size - but also replaced the transparent pixels to whites (must have used the wrong settings or so). Premiere Elements noticed the changed files and show them in the project now. I copied the backup files to the wrong files and now the files returned to their original state in Premiere Elements. The problem started when I added the following image to the project.

  I managed to finish the small project as planned, but I still wonder about this strange thing. Thanks for your reply though. How to mark this issue as resolved? That I have to take a "good response" (but then I don't know which one to choose)?

  Post edited by: reinc - me
  I fixed the formatting of the citation.

• How can I make a video with ss12 including a transparent alpha channel?

  I want to create a video with ss12 which has a transparent alpha channel - to use this video as a logo on a transparent background in other videos.

  I tried everything I found, including different video formats (like mov, mp4, mwv) and encoding of the parameters - nothing workes...

  So hopefully someone here can help me!

  I can't go to Premiere Pro because it's too complicated and I don't have the time to start to learn everthing from scratch once again...

  I can't believe that there is no way with the EP to do...

  Thanks in advance!

  Lutzzz

  Suppose you have a 1920 x 1080i30 chronology project whose content includes transparency in file (s) and you want to maintain that transparency in export.

  QuickTime (latest version installed), running programs as administrator.

  Publish + share

  Computer

  QuickTime

  with Presets = NTSC DV 16:9 for your HD project

  Now under the video tab Advanced tab of this preset, it should look like this

  

  Please define exactly as above

  The bases are set up for Video Codec = Animation and depth = 32 bits. No box next to "restore to a maximum depth.

  I just did a run through to go with this screenshot, and transparency in my calendar was maintained in the export of Animation.mov.

  This also worked if export setting looked like the following (interlaced instead of progressive)

  

  Please try this one. If it still do not work, then please provide details of your Timeline content, including with transparency.

  Thank you.

  RTA

• export the image with an alpha channel in cs3

  on the video layer 1 I have a background image and video 2 I have a psd numbered video of maya (is the text animation) with an alpha channel (black is the alpha).

  If I export the end frame (even with 1 off video (background)... I don't get a bmp or tiff with alpha channel image.  I get the black background.

  is it possible to export end frame and keep the alpha channel?

  Thank you!

  Search millions of colors +, this will give you channel alfa.

• How can I remove a space before the first word in a sentence using find and replace, or GREP?

  Right, so I put a document in inDesign to a word document, and it has a space before each first word in a sentence. It's really annoying and I need a quick way to get rid of them. I did not know how to do it with find/replace, but I don't know that there is a way to GREP, if someone can help me. I've included an image so that people can see exactly what I mean.

  Your example shows a space at the beginning of each paragraph, which is easy to remove with the ^ character, which means "beginning of the paragraph. If ^ \s will find a single of any kind at the beginning of a paragraph, as in your example. But the word you used was 'sentence' not 'paragraph' which can be more difficult. Surely if you are one of those one-space-after-point, you want to keep this space? What I don't get your example? Maybe your drive is one of those linebreak-at-the-end-of-each-sentence people.

• How to hide a multiple selection of the TableRegion element dynamically

  Hi all

  I have a requirement to hide the column multipleselection area of table dynamically. Based on the id liability multipleselection column must be disabled or hide.

  I gave the following code to set the fake rendered property.

  	OATableBean tabBean = (OATableBean) webBean.findIndexedChildRecursive ("SearchTable");
  	Salt of OAMultipleSelectionBean = (OAMultipleSelectionBean) tabBean.getTableSelection ();
  	sel.setRendered (false);

  But it's not working. Someone help me in this.

  Thank you and best regards,

  Myvizhi

  Hello

  Try using the code below:

  (I found this on the blog of Mukul

  Oracle of Mukul technology blog: dynamically change multiselect for single select statement in table of the OAF)

  Hide Multiple selection

  OAAdvancedTableBean tabBean = (OAAdvancedTableBean) webBean.findIndexedChildRecursive ("[table item id]");

  Given that multiple selection is at the end, get the total-1 to remove

  int count = tabBean.getIndexedChildCount (pageContext.getRenderingContext ());

  System.out.println ("number of children" + count);

  tabBean.removeIndexedChild(count-1);

  Sushant-

• How to operate an item selected in the table

  Hi all

  I do search and changes to these languages in the table, I want to run selected item in the dialog box, using function suitable for language

  feature does not not for the element selected, which is my fault

  can someone help me on this, the help will be most appreciated

  taken = type_ahead (["- search language -", "Albanian", "Arab", "Bosnia", "Bulgarian", "Burmese", "Chinese HK", "Chinese Sim', 'Chinese Taiwan',"Croatian","Czech","Danish","Dutch","Estonian","Persian","Finnish","French","German","Greek","Hebrew","Hungarian","Iceland","Indonesian","Italian","Japanese","Korean","Latvian","Lithuanian","Macedonian","Norwegian","Polish","Portuguese","Portuguese (BRAZIL)","Romanian","Russian","Serb","Slovene","Spanish","Spanish Columbia","Swedish","Thai","Turkish","Vietnamese""]);

  function type_ahead (table)

  {

  var l = new window ('dialogue', ' DHL find and change ');

  myGroup var = w.add ("group", undefined, ");

  var entry = w.add ('edittext', [0, 0, 300, 22]);

  entry.active = true;

  list var = w.add ("listbox", [0, 0, 300, 300], table, {scroll: true});

  List.Selection = 0;

  buttons

  var myButtonGroup = w.add ("group");

  myButtonGroup.alignment = 'Center ';

  bCan var = myButtonGroup.add ('button', undefined, 'Cancel');

  var bOK = myButtonGroup.add ('button', undefined, 'OK');

  bCan.onClick = function() {}

  w.Close ();

  }

  entry.onChanging = function)

  {

  var temp = this.text;

  list.removeAll ();

  for (var i = 0; i < array.length; i ++)

  If (array [i] .toLowerCase () .indexOf (temp) == 0)

  List.Add ("item", array [i]);

  If (list.items.length > 0)

  List.Selection = 0;

  }

  ~ entry.onChange = function () {w.close (1)}

  If (w.show ()! = 2)

  Return list.selection.text;

  on the other

  w.Close ();

  }

  bOK.onClick = function () {list.selection == 0? alert ("Please select any language"): w.close (1) ;};}

  function {Albanians ()}

  //---------------------Albanian----------------------

  app.findTextPreferences.findWhat = "program the efficiency of network operations ';

  app.changeTextPreferences.changeTo = "network of effective operations program."

  app.changeText ();

  app.findTextPreferences = app.changeTextPreferences = null;

  }

  function {Arabic ()}

  //--------------------Arabic-----------------------

  app.findGrepPreferences.findWhat = "";

  app.changeGrepPreferences.changeTo = "";

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.findWhat = "([0-9]) %';"

  app.changeGrepPreferences.changeTo = "$1";

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  }

  Thanks in advance

  Steve

  Hello

  Try the code that I changed a bit in your code below

  taken = type_ahead (["- search language -", "Albanian", "Arab", "Bosnia", "Bulgarian", "Burmese", "Chinese HK", "Chinese Sim', 'Chinese Taiwan',"Croatian","Czech","Danish","Dutch","Estonian","Persian","Finnish","French","German","Greek","Hebrew","Hungarian","Iceland","Indonesian","Italian","Japanese","Korean","Latvian","Lithuanian","Macedonian","Norwegian","Polish","Portuguese","Portuguese (BRAZIL)","Romanian","Russian","Serb","Slovene","Spanish","Spanish Columbia","Swedish","Thai","Turkish","Vietnamese""]);

  laung var;

  function type_ahead (table)

  {

  var l = new window ('dialogue', ' DHL find and change ');

  myGroup var = w.add ("group", undefined, ");

  var entry = w.add ('edittext', [0, 0, 300, 22]);

  entry.active = true;

  list var = w.add ("listbox", [0, 0, 300, 300], table, {scroll: true});

  List.Selection = 0;

  buttons

  var myButtonGroup = w.add ("group");

  myButtonGroup.alignment = 'Center ';

  bCan var = myButtonGroup.add ('button', undefined, 'Cancel');

  var bOK = myButtonGroup.add ('button', undefined, 'OK');

  bCan.onClick = function() {}

  w.Close ();

  }

  bOK.onClick = function () {list.selection == 0? alert ("Please select any language"): w.close (1) ;};}

  entry.onChanging = function)

  {

  var temp = this.text;

  list.removeAll ();

  for (var i = 0; i)< array.length;="">

  If (array [i] .toLowerCase () .indexOf (temp) == 0)

  List.Add ("item", array [i]);

  If (list.items.length > 0)

  List.Selection = 0;

  }

  ~ entry.onChange = function () {w.close (1)}

  If (w.show () == 1)

  {

  Laung = list.selection.text;

  } else {}

  w.Close ();

  }

  }

  If (cletie == 'Arabic') {}

  Arabic ();

  }

  function {Albanians ()}

  //---------------------Albanian----------------------

  app.findTextPreferences.findWhat = "program the efficiency of network operations ';

  app.changeTextPreferences.changeTo = "network of effective operations program."

  app.changeText ();

  app.findTextPreferences = app.changeTextPreferences = null;

  }

  function {Arabic ()}

  //--------------------Arabic-----------------------

  app.findGrepPreferences.findWhat = "";

  app.changeGrepPreferences.changeTo = "";

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.findWhat = "([0-9]) %';"

  app.changeGrepPreferences.changeTo = "$1";

  app.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  }

  Mi_D

• type of CS5.5 Illustrator editable, no selectable with the text tool

  Hi people, working on a poster in Illustrator. Added the type of area, using the text tool. Now I would like to increase the size of a single line. I can't select or change any type with the text tool. I have moved into a new layer, registered, closed type Illustrator, restarted my Mac (OS X 10.7.4).) Looked in preferences, in which case there is a problem. No luck.

  Furthermore, I don't see two handles when selecting the tool more. Don't know if that is related.

  Display > display the edges

  View > see the bounding box

• How to stop records in doubles before the Save as tabular form Oracle/Developer

  Dear friends

  I want to stop duplicate records to save in tabular form of oracle developer.

  For example

  I have a tabular form and there are three fields.

  Vendor_id Item_id Qty.

  1                  37630         1

  1                  37630         4

  Above in double item_id should not be saved.

  Help, please

  Concerning

  Why not make a unique constraint on the database?

  Kind regards

  Zlatko

• How can I treat a selection as the big picture all in compensation?

  I have a Blender UV and part of the image is for a specific face. I want to tile this part of the image but I can't make tilable, due to the offset filte LectureSeule work across

  So make a new file / Smart Object with dimensions appropriate and drag or copy / paste the content on that.