How to use Excel_WorksheetSaveAs to save in CSV

Similar Questions

• How to use a screen saver in Windows 7?

  Original title: Screen saver

  My screensaver allows to work with Webshots, now using MS (or Picasa), I would like to have a screen saver.

  I tried without success and frustrated.

  Just tell me a simple way to use a screen saver in Windows 7.

  If this isn't a problem of 'Performance and Maintenance', please put it in the right area.

  Hello

  The best way to add a screen saver in Windows 7 is around a theme. To do this: go to control panel and select personalization. When this window opens scroll down and you can change the desktop background, color of the window, the sound and screen saver. Set any one or all the of them for what you want and when you have finished setting regardless of the changes you want, make right click on the unsaved half theme top of the box and select Save the theme as and enter any name you want. Then, you will always have this theme available to choose from.

  Let me know if you need more instructions detail, something else, after back here with your results!

  Kind regards

  BearPup

• How to use db tools save the recordset to XML

  is there an example of how create the ADO Recordset req should use this VI?  Basically, I want to open a MSAccess table and save the data in an XML file (with a select as a filter).  THX

  gXML toolkit seems to provide a good way to achieve this, no need extra help.

• How to use the screen saver password

  want my computer to disconnect after being away from my computer for so long.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/use-your-Windows-password-for-your-screen-saver-password

  Use your Windows password for your screen saver password

  You can help make your computer more secure by creating a screen saver password, to lock your computer when the screen saver is activated. The screen saver password is the same password that you use when you connect to Windows drives.

  Read the info on the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to use the document saveAs to save a PDF file on a UNC path

  Can document saveAs tsave a PDF file to a UNC path on a network share?

  Sorry, reading of UCS for UNC.

  The format for a network path \\server\folder\file.pdf is

  / SERVER/FOLDER/FILE. PDF

  Message has been corrected by: screen name of Test for change-to.

• How to use a flash drive on windows 7 64 bit

  I bought a 128 GB Flash drive before reinstalling my windows. Can you please advise me how to use it to save all, My Documents, Internet explorer, Mozilla Firefox & Google Chrome I have many Favorites saved on all of these programs.

  Thank you very much

  Mr J R wild.

  Open your user folder:

  Press Windows key + R

  Type: %UserProfile%

  Press enter on your keyboard

  Select view files and folders

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  then

  Highlight all folders in your personal folder (press on Ctrl + A or click on organize > Select All)

  

  (Press Ctrl + C or click arrange > copy)

  Open the thumbdrive

  (Press Ctrl + V or click arrange > stick)

  When you enable Show hidden files and folders, it copies the AppData folder that copies your custom settings for applications like Word dictionary and bookmarks for applications such as Chrome and Firefox.

  Go to the work computer, then copy and paste these files in the respective locations.

  Don't forget to enable Show hidden files and folders.

• How do I save the .csv files

  Hello

  I use 'writing on file measurment' and by defult files are saved as ".lmv". How can I change this to save in ".csv" by default.

  Thank you!

  Something like that

  

• I'm using vista, and I don't know how to download music and save to flash memory directly. heat the vista. Under XP, it's very simple.

  I use vista media player, and I don't know how to download music and save to flash memory directly. Heat the vista. XP is very simple.

  Hi bojanaana,

  You can access online stores of in windows media player. Once you do, you can download music and video files from online stores.

  For more information please visit the link below
  Shop online in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/shop-online-in-Windows-Media-Player

  Once you download the music or video you can drag and drop the music or video on the USB drive.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use iCloud

  HI, please help a total techaphobe. I need to store my photos in iCloud (that is already installed on my iPad, I have Apple ID n all). I tried to select the photos, but there is no option, then save in the cloud. Perhaps they are there already as the AutoSave is enabled, in which case, I need to have access to make sure that there so I can remove from iPad. There is nothing in "iCloud Drive" (I have no idea what Drive is in iCloud). All I can find on the line is either too complicated (it can not be that complicated) try to put myself in place (which I am already), or is completely irrelevant, even the things in apple support. I'm sure it's there somewhere, but it seems that I have to trawl through so much, I hope one of us guys can help me with a frank explanation...

  Go to iCloud.com on a browser and click the Photos app to see if your photos are indeed already in iCloud.  You can also check the Photos app on your iPad as well.

  Another thing to note, you can't delete photos from your iPad, because, unfortunately, is not how iCloud works.  It's a synchronization service and not an archival.  There is not your traditional cloud based.  Which means that it syncs your data on all of your devices that have them at your disposal.  Remove a device and it went on all devices.

  Hope that helps.

  How to use iCloud drive

• How to use the utility to update (uefi) BIOS HP

  Notebook: G62 a10em

  I downloaded the BIOS update tool from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 4226...

  and it is installed on my USB key.

  Now, how can I update my bios?

  The USB key contains now:

  BIOS

  | - Current (empty folder)

  | - New (empty folder)

  | - Previous (empty folder)

  BIOSUpdate

  -CryptRSA.efi

  -CryptRSA32.efi

  -HpBiosUpdate.efi

  -HpBiosUpdate.s09

  -HpBiosUpdate.sig

  -HpBiosUpdate32.efi

  -HpBiosUpdate32.s09

  -HpBiosUpdate32.sig

  my current version of bios is f. 08

  I did a cut above.

  After looking at the appropriate file you downloaded, it says this:

  "Prerequisites .
  -Microsoft .NET 2.0 is required. UEFI and Custom Imaging - the HP BIOS update must be run from a FAT or FAT32, partition with a volume of the "HP_TOOLS" name This Installer gives you the option to install on the hard disk (HDD) or USB. If you install on the HARD disk and the HP_TOOLS partition is not present, Setup prompts to create the HP_TOOLS partition. If you install on a USB key, Setup renames the partition on the USB in HP_TOOLS. If you use a custom image, you can create the HP_TOOLS partition manually with the type FAT32 and that the volume HP_TOOLS name. ATTENTION:-the UEFI system partition is not protected and can be removed. -Backup of the computer by using the complete PC Backup feature of Microsoft Windows Vista does not save the UEFI system partition. For these reasons, HP recommends that you place no additional data on the UEFI system partition. Because the partition is not backed up, corruption or failure of the partition will result in the loss of all data on the partition, as well as the loss of UEFI functionality. "For more information, visit: www.hp.com/go/techcenter/startup"

  There is little documentation on how to use it, but a Member here figured it out.

  http://h30434.www3.HP.com/T5/operating-systems-and-software/envy-14-system-recovery-doesn-t-work-with-latest-BIOS/m-p/328684/highlight/false#M45165

  using Windows 7:

  Just plug in the USB key and then run the SPnnnnn.exe BIOS file downloaded from the Web site drivers HP.

  Assuming that the USB is configured correctly (see below), Setup the BIOS sees the HP_TOOLS partition on the USB, copy of the BIOS and its file signature on the USB key, then run Setup winflash. The system BIOS detects the USB and the partition HP_TOOLS and the BIOS is magically updated.

  I put in place a new USB key as follows:

  1 rename the partition HP_TOOLS from the hard drive to something different like HP_TOOLSbak

  2. Plug the USB

  3. Download and run the utility to update the BIOS (not the BIOS, still) drivers HP support page.

  4. Select the option to install to a USB

  5. Select the option to create the partition HP_TOOLS

  6. The reader should now be formatted as HP_TOOLS with a record of Hewlett-Packard containing BIOS and BIOSUpdate records. The BIOS folder contains empty current, news and previous records.

  7 download and run the HP System Diagnostics (UEFI) MS drivers HP support page

  8. Select the option to install on a USB key. This will create a SystemDiags folder under the Hewlett-Packard folder

  9. Download and run the HP Notebook System BIOS update for the HP support page drivers, given that the USB is correctly tagged it will install the update of the bios on the USB drive

  10, we have to end up with a HP_TOOLS partition on the USB drive identical to the one that you removed from the hard drive.

  Once you have configured the USB drive, you can upgrade to other versions of BIOS (most recent or oldest) using this drive, as I mentioned above: just plug in the USB and then download and run the BIOS Setup program.

  Having said that I'm not sure of what you do, once you boot the USB drive.

  .

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• Satellite M100 - how to use the restore CD?

  Hello

  I have a Toshiba satellite m100...
  Due to a virus problem, I had my laptop set in shape by a local technician...
  It has installed a pirated version of windows xp, even if I had given him the recovery dvd. I had the memory upgraded to 1 GB also...

  Now, I would like to know how to use my recovery DVD for the original windows xp? The user manual mentions express media player recovery cd.
  I n t have it... What should I do... plse help... as you can see, I am a complete newbie at this... so would appreciate that you would give me the answer in detail... Thanks in advance...

  Hello

  It's really easy buddy.
  You must boot from the Toshiba recovery disc in order to start the recovery procedure.

  But note; the recovery disc formats the entire HARD drive. So if you have important data on your HARD drive and save it first.

  Greetigns

• Satellite Pro 6100 how to use recovery DVD-ROM with vmware products

  Hello

  I like to use the recovery DVDs of product (T201651-GR) of my Satelite Pro 6100 on VmWare player, because I use openSUSE Linux as main operating system (not Windows installed on the hard disk).
  I do like install and save hard disk laptop, so that to restore later inside the vmware. If it works?
  I wonder if someone can tell me how to use my legal version of Windows XP on VmWare player?

  Thank you in advance,
  Bernd

  Hello

  I doubt that it works with VmWare.
  Why?
  Because the restore CD contains the ghost image files and you will need to boot from the recovery CD for installation.

  So I see the chances of getting this job running VmWare.

• Satellite L300: How to use a partition of data for my documents

  Hello

  the Sat L300 160 GB hard drive is partitioned into vista and data.
  I want to save a large number of photos in my documents, which is on the part of vista.
  This example uses only half of the road.

  How to use the data for my documents component? TIA

  Hello

  You can make a folder on the second partition, and can store the necessary files (documents, photos) in specific files.

  Or maybe you want to decrease the Vista partition?

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.