How to use FND_MESSAGE in my controller.

Similar Questions

• How to use pine TRG in controller PXI-8176

  Dear all,

  I have the Thermocouple data acquisition system. In which there are 2 PXI chassis (1) 1002 with

  PXI8176 controller with RT, map 6071E PXI data acquisition (2) block 1001 SCXI with SCXI-1125 and SCXI1327 card.

  PXI 6071E connected in 1125 SCXI with SH1006868 cable and adapter SCXI1349.

  I'm using Labview 8.6, DAQmx9.0

  I develop the program for the continuous acquisition of thermocouple. Now, I want to do the program on the acquisition of database trigger.  When the trigger pulse comes the system begins to acquire (newspapers and data in the file) to userdefine times and stop the acquisition. Again when the trigger pulse comes new system begins to acquire and to stop at defined time.

  There is a single pin FIT on the PXI-8176 controller, can I use that one and how do I use it? Or I have to use the separate DIO line for trigger?

  You can guide me how I can develop this system.

  Thank you.

  -Vishnu

  Yes, you can route a trigger for channels PXI trigger in the bottom of the basket of the PXI chassis via the SMB connector located on the front of the PXI embedded controller.

  Please see tutorial following example or the same article on devzone

  Hope this helps

• How to use getDBTransaction() in the controller class

  I use the code below.
  
  OADBTransaction tx = (OADBTransaction) getDBTransaction ();
  java.sql.Connection pConncection = tx.getJdbcConnection ();
  ConcurrentRequest cr = new ConcurrentRequest (pConncection);
  
  
  But receiver error not found getDBTransaction method in the cust.oracle.apps.pos.changeorder.webui.extendViewOrderPGCO class below
  
  Should I extend AM and use this code in AM or can I use this code in extended controller.
  
  Thanks for your help.
  HP.

  OADBTransaction tx = (OADBTransaction) getDBTransaction ();
  java.sql.Connection pConncection = tx.getJdbcConnection ();
  ConcurrentRequest cr = new ConcurrentRequest (pConncection);

  Connection conn = (Connection)oapagecontext.getApplicationModule(oawebbean).getOADBTransaction().getJdbcConnection();
  ConcurrentRequest cr = new ConcurrentRequest(conn);
  

  http://oracleanil.blogspot.com/2009/04/itemqueryvoxml.html

  Thank you
  -Anil
  http://oracleanil.blogspot.com

• I'm not clear how to use the recovery CD

  I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

  A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

  Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
  The only person who could help me went to travel and not reachable.
  Any help greatly appreciated
  Lorraine Hart

  It of a very simple to recover the laptop.
  Just boot from the recovery CD and follow the instructions on-screen ;)

  I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
  So in this case only the selected partition will be formatted!

  But have you checked the size of the HARD disk in disk management?
  Simply click on the my icon my computer and choose manage.

  Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

• Qosmio F30-127: how to use the SD - no SD card reader icon

  Could someone how to use SD F30-127.
  I tried to get the image from my SD card.
  I inserted in the slot, but no drive ICON displayed

  Hmmm. Please check if the SD card has been recognized in the Device Manager.
  There should be no yellow exclamation!

  Another allusion;
  -Remove the SD card in the slot
  -Go to Device Manager and remove the SD card controller
  -Now reboot the laptop
  -After restarting again windows should recognize and install new hardware. It is a SD card controller.
  -Now, try to reinsert the SD card!

  By the way; have you used the format SD card?

• can I use a regular xbox controller to play alice madness returns?

  can I use a regular xbox controller to play alice madness returns?

  Hi Quidnunc54,

  ·         You try to play the game on computer?

  ·         What version of Windows are you using?

  If you try to play the game on the computer, you can use the Xbox controller as a platform.

  For further assistance, please visit the following Web site for information about how to contact Xbox support:

  http://www.Xbox.com/support/contact

  Also, to post your query on the forums Xbox see the link below.

  http://forums.Xbox.com/

  Hope this information helps.

• How to use COM DLL in LabWindows

  Hello

  I have a COM .dll file that looks like this when opened with dll export viewer:

  

  I would like to use the Get4AxisPos function in LabWindows.

  I realized that, as I only have the .dll file, the only way to call these functions are the LoadLibrary() and GetProcAddress() functions.

  My problem is that the function Get4AxisPos is not of type exported function but COM method, so I don't know how to use it in my project LabWindows!

  My questions are: is - this will use this dll in Labwindows? If yes how?

  Thank you

  Use tools | Create the ActiveX controller... CVI to generate a range of function that contains the code of the interface that allows you to manipulate COM objects in the DLL. Search Help for "ActiveX controller Assistant" more information on this installation.

• How can I get the game controller that you want to correlate to the keyboard commands?

  How can I get the game controller that you want to correlate to the keyboard commands?

  You may need to use the profiling software that comes with any game controller you are using.

  Some software controller has a library of game titles with default button/key configurations that

  You can change in the software according to your desires.

  -The software will need to navigate you to the games executable ( .exe ) from in the profiling software, which allows for the profile that you create in order to be recognized when you load the game in question.

  You can create orders, or simply assign a key combination, of a particular button on the controller

  and save the profile.

  -If the controller does not have a profiling software available for download, you may be stuck

  with some default orders can work with this controller and as a monopoly$ insinuated oft

  the controller XBOX games PC as a default configuration, a few years ago, it could mean

  your controller can be very useful if it is not programmed to emulate the XBOX controller.

  -If your controller is programmed to emulate the XBOX controller (like many recent controllers)

  It should be just a matter of changing the configuration in game controller options.

• How to use the NEW BLACK xbox 360 media center remote with Windows 7 Ultimate & Windows Media Center

  I have the new Black xbox 360 media center remote and I can not understand how to use it with my PC to run windows media center. I'm running Windows 7 Ultimate x 64, and I also have the receiver wireless for my xbox 360 wireless controllers.

  Here is a link to a better image of the remote control.
  Here is a link to my xbox 360 wireless receiver.
  I also have a mini receiver RF for a keyboard and a mouse if that helps somehow.
  I don't have an xbox 360, but I like to use my controller wireless for my PC games and emulators like the style and color of this remote it would go well with my current setup as well as with XBMC.
  If anyone knows or can help me to find a way to make this work I would appreciate it a lot.
  Thank you
       
  Michael

  Hi Michael,

  Thanks for posting your question in the Microsoft Community.

  The question you have posted is related to the Xbox 360 and it would be better suited to contact Xbox support to obtain assistance from the links below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  http://support.Xbox.com/en-us/browse?product=Xbox-360

  I hope that the information above helps you.

• How do I know what RAID controller works the box?

  Using the VMware Compatibility Guide, how do I know what RAID controller works out of the box (no installation necessary driver, no action necessary special) for 5.5 ESXi update 2?

  PS - I initially assumed that if they appear then they work OOB, but there is nothing on the page registration or landing pages of the device that makes this clear.

  Once you click the RAID controller in the HCL, you will see all the supported versions of ESXi with the appropriate driver listed as "inbox" or async". There may be more driver for a specific version, but if one of them is stated as "inbox", it is supposed to work out of the box.

  André

• How to use setFireActionForSubmit with the settings and capture the parameter

  Hello
  
  Can someone explain how to use setFireActionForSubmit.
  
  I extend the ShoppingCartPG controller. In the extended controller processRequest method I am adding a button to the table and implementation of the setFireActionForSubmit, so when the button is pressed it triggers the setFireActionForSubmit event.
  I need to pass the RequisitionLineId as a parameter which is present in the t associated with the ShoppingCartPG.
  
  I used the following code in the processRequest
  =================================
  ' public void processRequest (OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
  {
  super.processRequest (paramOAPageContext, paramOAWebBean);
  OATableBean otbRN = (OATableBean) paramOAWebBean.findIndexedChildRecursive ("ItemTableRN");
  OASB OASubmitButtonBean = (OASubmitButtonBean) paramOAPageContext.getWebBeanFactory () .createWebBean (paramOAPageContext, "BUTTON_SUBMIT");
  
  oasb.setID ("addnInfo");
  oasb.setUINodeName ("addnInfo");
  oasb.setText ("additional information");
  
  String pageName = paramOAPageContext.getRootRegionCode ();
  Hashtable params = new Hashtable (1);
  params.put ("param1", pageName);
  
  Hashtable paramsWithBinds = new Hashtable (1);
  paramsWithBinds.put ("param2", new OADataBoundValueFireActionURL (OASB, "${oa.encrypt.current.RequisitionLineId}"));
  oasb.setFireActionForSubmit ("addnInfoEvent", params, paramsWithBinds, false, false);
  
  otbRN.addIndexedChild (oasb);
  }
  =================================
  
  And I capture the event "addnInfoEvent" in processFormRequest method and trying to capture the RequisitionLineId I the past as a parameter.
  This is the code that I used in processFormRequest.
  =================================
  ' Public Sub processFormRequest (OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
  {
  super.processFormRequest (paramOAPageContext, paramOAWebBean);
  OAApplicationModule localOAApplicationModule = (paramOAWebBean) paramOAPageContext.getApplicationModule;
  
  String strEvent = paramOAPageContext.getParameter (EVENT_PARAM);
  
  If ("addnInfoEvent".equals (strEvent))
  {
  Number format = 0;
  try {}
  Format = new Integer (ClientUtil.getDecryptedParameter (paramOAPageContext, "param2"));
  }
  catch (System.Exception e) {e.printStackTrace () ;}
  
  String outmsg = "line ID:" + size + ":" + strEvent;
  throw new OAException (outmsg, OAException.INFORMATION);
  }
  }
  =================================
  
  But I'm not able to capture the RequisitionLineId I sent as a parameter.
  Can someone let me know what I am doing wrong.

  Hello

  Because your table is not a tip so table using a submit button approach will not work because it won't give you rank of reference and you will not be able to enter the id of the corresponding command line, instead you use an icon of the image, which can be created through customization. Let me know if you need help in the code.

  Thank you
  Pratap

• How to use paragraph styles?

  Can someone explain how to use paragraph Styles? OMG! This is so difficult for me to kiss - I can't seem to understand how to create a paragraph style in a document, in the first place, then I don't seem to be able to apply it to the rest of paragraphs in the document.  Whenever I have try this I lose the track and then I lose patience!

  I do appreciate this forum and hope someone can clarify this issue for me, I am eternally grateful. I'm trying to gather some my illustrations and story in a booklet for children and I need to get out to publishers (fingers crossed!) until I forget why I started to be a student in graphic design and Illustration in the first place

  Thank you!

  aganess wrote:

  Can someone explain how to use paragraph Styles? OMG! This is so difficult for me to kiss - I can't seem to understand how to create a paragraph style in a document, in the first place, then I don't seem to be able to apply it to the rest of paragraphs in the document.  Whenever I have try this I lose the track and then I lose patience!

  I do appreciate this forum and hope someone can clarify this issue for me, I am eternally grateful. I'm trying to gather some my illustrations and story in a booklet for children and I need to get out to publishers (fingers crossed!) until I forget why I started to be a student in graphic design and Illustration in the first place

  Thank you!

  I've been there. It was a long time ago, but I still remember the confusion and despair.

  First, know that you will survive and ask what was the hang up. If you are a special person, do you promise never to forget what was the hang up, then you can help others when it is time to pay back the community.

  Think about how things work without paragraph styles. When you want a paragraph to look a certain way, regardless of the software you have used to work with text, you select ("highlight") some text and look for ways to style it (check its appearance, or 'attributes' or 'features' or 'features'.) You choose a font (Helvetica, Times, etc.) weight ("BOLD", extra bold, light), a color of text, an angle (italic, Roman), the space between the lines ("leading,") space between paragraphs (space before, space after,) and so on. Without named styles, you must select each property in a menu or a list when the text is selected. The next time that you want this same paragraph look, you can recall everything you did and repeat with newly selected text, or you can copy and paste one that looks, then change the text inside.

  However, it does take long to realize that he has to be a way to save these settings and pull them up and slap them on the other selections, with a few clicks and make sure that you don't forget to do something. Creation and registration of collection of a paragraph of the property settings are called "define a style." Software for manipulation of more modern text can save paragraph styles that apply to full paragraphs, and they can also save character styles, which apply to parts of the text in a paragraph. A paragraph of normal text can be used a style called 'body '. You can select a bunch of miscellaneously style paragraphs and apply the body style for them with a single click on the paragraph styles list.

  If you decide that you would like the body to look different style, you can redefine, and all paragraphs in the active document using the body style change to show the look of the new definition.

  In a body paragraph, you can have same bold italic bold text and italictext and so on. You can always select text in a paragraph and find a menu that offers characters bold or italic in the selected text. But you can also create a character for each of these apparitions style and apply them to music. As for paragraph styles, character styles are more controllable and more useful than simply highlight and apply a property. If, you use a character style that applies "BOLD", you can change its character style definition and all the places it is used in a document will show the change.

  Here is an example which shows the usefulness of the styles of characters named:

  According to the standard style for writing guides that have been developed before computers, scientific names, the words of the foreign language in a host as the English language, the titles of the documents, movies and poems and a few other things are supposed to be italicized. With character styles, you can create and apply styles of characters for each category of text in italics. In this forum, * sapiens, The Pentagon Papers and Gone With the Wind, all look the same, but with character styles, styles, named 'scientificName', 'bookTitle', and 'filmTitle', can distinguish between texts in italics. Sometimes, you gotta be able to treat these things differently, and styles is a way to keep them organized.

  Most writing tools can create a style named for the existing sample. So, if you have customized a paragraph for your body text, you can use InDesign to set the body of the paragraph in the example chosen style.

  Google search for terms like 'InDesign create the paragraph of the selection style,' "InDesign redefine style', 'Create a character style, InDesign' and"InDesign tutorial character and paragraph styles."

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How to use FaceTime with Siri

  I you would Siri have been able to dial phone numbers using FaceTime, so my question is, is it possible? And if so, how?

  Hey MichaelnAvallone,

  Thank you for reaching out to help through Apple Support communities. Looks like you are wanting to make calls FaceTime with Siri. If so, I'd be happy to explain how to make this happen. First, you'll want to press on and hold the Home button or say "Hey Siri" to activate Siri. Then, for example, you can simply say, "make an audio call FaceTime to MOM" and Siri will only start a FaceTime call audio. If you say 'FaceTime Mom' Siri will begin a FaceTime call with video of this contact.

  The link below shows the ways to learn how to use Siri.

  Use Siri on your iPhone, iPad or iPod touch

  Kind regards.

• How to use iCloud

  HI, please help a total techaphobe. I need to store my photos in iCloud (that is already installed on my iPad, I have Apple ID n all). I tried to select the photos, but there is no option, then save in the cloud. Perhaps they are there already as the AutoSave is enabled, in which case, I need to have access to make sure that there so I can remove from iPad. There is nothing in "iCloud Drive" (I have no idea what Drive is in iCloud). All I can find on the line is either too complicated (it can not be that complicated) try to put myself in place (which I am already), or is completely irrelevant, even the things in apple support. I'm sure it's there somewhere, but it seems that I have to trawl through so much, I hope one of us guys can help me with a frank explanation...

  Go to iCloud.com on a browser and click the Photos app to see if your photos are indeed already in iCloud.  You can also check the Photos app on your iPad as well.

  Another thing to note, you can't delete photos from your iPad, because, unfortunately, is not how iCloud works.  It's a synchronization service and not an archival.  There is not your traditional cloud based.  Which means that it syncs your data on all of your devices that have them at your disposal.  Remove a device and it went on all devices.

  Hope that helps.

  How to use iCloud drive

• How to use audio only AirPlay on iOS10?

  HI guys, maybe I'm stupid, but I can't find how to use streams of music after upgrade.

  UseCase:

  -listen to music through headphones on my way back

  -When reached on home stereo and activate AirPlay

  iOS9 - low slide menu - AirPlay - Audio sent to Apple TV and stereo, play music (took about 3 seconds)

  iOS10 - slide down menu - AirPlay - there is only activate AirPlay with mirroring. That is originally for my TV to turn on automatically and also phone is drained and you know - I want to use only phone no stream all on television.  (Past 10 minutes, and can not find how to do this)

  Any tips?

  Hello Tomas Vrabec,.

  Thank you for using communities of Apple Support. Information you provided, it looks like you are unable to use AirPlay to play only mirroring content after upgrading to iOS 10. Surely, I understand your concern, especially since it worked as you need on the previous version of the software. I'm happy to help you.

  Looks like you are taking the correct steps. First of all, I recommend you restart. This can solve a lot of unexpected errors. Use the restart below steps if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo

  Restart your iPhone, iPad or iPod touch

  If the problem persists, please use the steps and pictures in the link below for more information on troubleshooting:

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch

  Have a wonderful day!