Qosmio F30-127: how to use the SD - no SD card reader icon

Similar Questions

• Qosmio F30-140 - how to use the USB Flash boot option?

  Dear,

  After I updated my BIOS of the laptop, when I start my laptop I find new start method, it is from USB Flash?  :| How I can use it and what type of file should be in it? I mean .iso or what?

  Thank you

  Hello

  I n t have Qosmio F30 so that I can t test it for you, but I think it means options that you can boot from a USB stick for example. Did you check that?

  You can boot from an iso file t because you have to create a bootable media. For example a Windows Start disc or a version of Linux that you can boot from a USB key.

• How to use the smartswipe on mozilla card reader

  I used the smartswipe long on IE with no problems card reader, then I started having windows pop up on the screen when you use the card to update reader browser DESPITE the fact that I got IE9 (latest) already loaded. I sent an email asking why their site could not detect this at smartswipe site and said by them to reload IE9 or load Mozilla. Reloading of IE9 was not good - I kept getting error message. I used Mozilla for awhile until my HD failed and was replaced. Now your website says disabled smartswipe and used to work with Mozilla 20.1 can use a version earlier than Mozilla or not? Please help me on this issue. Thank you.

  Hey,.

  the last executable is Firefox 19 and can be downloaded here:
  http://SmartSwipe.ca/downloads/

  I'm not sure if it is also possible to run it on 20 of Firefox, but you can try it. If this does not work, you can demote [1] or wait Smartswipe publishes an updated version of the application.

  [1] install an older version of Firefox

• Qosmio F30-125 - how to upgrade the RAM?

  Hello

  I have a model PQF30E Qosmio and who seek to increase the RAM.

  I read that this model can take 2 GB max as opposed to the PQF32E which can take 4 GB.

  I have the standard 512 MB installed at the moment and when I open the back I have only a slot for expansion. Should I put a 2 GB upgrade in this slot I can not find a 1.5 GB upgrade or is it possible to delete the original 512 and replace with2 x 1 or 1 x 2 GB.

  Thank you
  Ben

  Hi mate

  What boarder said is right.
  The user manual provides information on the possible RAM upgrade and there is also an instruction how to put the RAM in the slots.
  Usually it s not difficult and can be done very quickly.

  View just the words to the subject of the upgrade of RAM max;
  It's material and limited to Intel chipset limitation.
  If you want to know how much RAM is possible then check your type of chipset and visit Intel for chipset details.
  In the datasheet, you can find the specifications of the chipset.

• Qosmio F30-141 - how to change the RAID to IDA in the BIOS?

  Hello world! I own computer laptop Qosmio F30-141. The problem is that I don't like vassive RAID. Please, could you tell me step by step how to change the RAID to IDA in the BIOS. Thank you in advance.

  Why do you think that this can be changed?
  Maybe you can disable the RAID and be happy without him.

  Have you checked s manuals? It is described how RAID works on Qosmio F30.

• Qosmio G20-127: how to upgrade the GPU

  Hello

  I want to change the video card in my Qosmio G20 - 127 better one. Can anyone tell me, is this possible and what video card I can use.

  Hello

  I can tell you that this is not possible because the GPU is still welded on the map and it of not possible to remove it on an ongoing basis.

  So unfortunately, but you o forget him!

  Welcome them

• Qosmio F30-112 - how to reset the BIOS password

  Hello

  Broke laptop Qosmio F30 - 112 with broken lcd screen.
  Now, I get new lcd monitor and fix it but I can't access the password of the bios.

  I discovered how to recover passwords of other boards in computers laptop toshiba, but I can't find this.
  I'm looking for is the name of "rider" that resets my bios password.
  I carried a laptop in a local service, but they did not eliminate the problem.

  Help, please!

  Best regards

  Antonio

  Hello

  As far as I know the unknown BIOS password can be removed only by technicians of Toshiba ASP maybe you will have to pay a small fee but should not be too
  Another method is not known to me ;(

• Qosmio G35-av600: how to use the display internal as a monitor using composite-in?

  I want to connect my video gaming system and use my laptop screen, but I can't seem to understand how to change the settings so that my monitor displays the video game? Composite in the settings?

  I have a G35-av600 bought last June. If anyone has any suggestions, let me know

  Hello

  I don't know if I can help because I know something about the Qosmio G10 and the G20 and your Qosmio seems to be a mobile US but I will try my best ;) m

  Qosmio G10 for example, you must modify the input parameters in the Toshiba utility image of development, but I guess you don t have this tool pre-installed.

  But I think that the composite is a good Butler built the connection with the game station.
  I think that in the advanced graphics settings, you should be able to find the right options.

  Play around with the settings.

• Qosmio F50-125 - how to use the TV - FM Tuner in Windows 7

  Hello

  I use Qosmio F50-125 and I've just upgraded to Windows 7.
  Earlier, I discovered that I have a TV tuner on my laptop and I don't know how to use it.

  First of all, I don't have drivers for my TV tuner and tried to download something like v.2.3.3.31 driver TV tuner on the toshiba site, but it is not a typical setup.exe but only some files inside.

  If you could tell me a little more about how to use my TV option and how to install the correct drivers, I would be really grateful.

  Thanks in advance!

  After you have extracted the files you get the folder with other files
  I assume these are files required by FM tuner driver.

  Now you need to go to Device Manager, must mark the FM tuner (possibly unknown device if the driver is missing) a duty to install/update the driver.
  In your case, use the Advanced Setup.
  This allows to point to the files extracted.

• Office Jet 8620: cannot use the 3 USB sd card reader

  trying to hook up a generic USB 3 SD card reader to the USB port of the printer, but it does not identify all the photos on the SD card. Is there a way around this problem?  IM surprised this printer only has as basic thing as a reader of SD cards on this subject.

  Hi @drinternet,

  Make sure that they are formatted in Fat32, if they are not already, that should work.

  Thank you.

• Qosmio F30-117: how to calculate the Win Vista experience Index Graphics score?

  My F30-117 has a NVIDIA GeForce Go 7600 of type graphics card. WIE gives a score of graphics of * 4.9 based on the following information:

  399 MB total available graphics memory
  128 MB dedicated graphics memory
  0 MB dedicated system memory
  271 MB shared system memory

  However my G40-108 has a NVIDIA GeForce 8600 M GT type graphics card. WIE only gives a score of graphics of * 4.4 based on the following information:

  1791 MB total available graphics memory
  512 MB dedicated graphics memory
  0 MB dedicated system memory
  1279 MB shared system memory

  Someone knows why? The two PCs have the latest drivers and all the Windows updates available. Both are running Vista Ultimate. If something I expect the scores to be the other way around!

  Hello

  The functionality of Windows Vista experience Index that is designed to help better understand
  How Windows Vista and other software will perform on your computer.
  As I know the Windows experience index scale varies from 1.0 to 5.9.
  A higher base score means that your computer run better as a computer with a lower score.

  I don t want to explain the characteristics of everything because there are a lot of pages useful Microsoft that already provides this information:

  Check this box:
  [Windows Experience Index: year in-depth Look | http://windowsvistablog.com/blogs/windowsvista/pages/458117.aspx]

  or this MS site:
  [Windows Experience Index | http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/experienceindex.mspx]

  Good bye

• Qosmio F50-114 - how to use the video cable?

  Hello
  I have a Qosmio F50-114.
  I want to capture video via the video cable supplied with the computer.

  The computer came with a video component cable software plug-in (1 x 3, 5mm - 3xRCA white/red/yellow). The only place in the manual stating that cable is the only a-in-the-box-section.

  On my old Qosmio F20, I had a specific connector for the video cable component software plug-in. There is no specific 3, 5mm connector so I suspect that I have to join one of the IR ports, or one of the audio-connectors (?).

  Looking forward to a response.
  / Daniel

  Hey,.

  Don t get me wrong, but I'm 99.9% sure that there is no video port on Qosmio F50. As far as I know that these books are not available, they have a video output only, port but not port of entry to capture video.
  So you mixed up something I think

  What you may be hearing is integrated TV Tuner, but on this port you can only record videos from DVB - T signal.

• Qosmio F30-127 abandoned but still on sale in stores, but not by Toshiba?

  Hi, does anyone know why the Qosmio F30-127 is deleted in the site Web of Toshiba but its still for sale at other retailers?

  I found for £679 pds but just wondering why?

  Rgds

  Why abandoned model?

  I found this device here on the Toshiba site and most online dealers offer this laptop for sale:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?PRODUCT_ID=119392&service=UK&tab=3& toshibaShop = false

  As far as I know that the Qosmio F30 - 127 (PQF30E) was delivered to the United Kingdom.

• Qosmio F30-127 is unable to read the Vista upgrade disc

  Hi guys,.

  I have a Toshiba Qosmio F30 (127) with the standard front load Mat * a DVD-RAM (model UJ-846) Player.

  I have for months without any apparent problem burn a variety of CD DVD & (R/RW) and recently received my expected Vista Express Upgrade DVD which I assume adopts the format DVD RAM.

  After the upgrade of the BIOS to v3.4, I successfully installed upgrading startup, but only one of the hard drives (RAID) which has been recognized in my windows session (with the recoil, I would simply have used administrative tools > computer management > disk management) ;-(

  I reinstalled XP using the recovery disks provided original in preparation to retry the Vista upgrade a 2nd time to correct the alleged no recorded 2nd hard drive.

  However, on the startup of XP, the Vista Upgrade DVD doesn't have to be recognized at startup (i) or (ii) in the case of a Windows session, without a visible change in the drive icon to indicate the usual recognition.

  If I try to double click on the drive icon, I get the error message:

  "D:\ is not accessible. The request could not be performed because of an i/o device error.

  I have read a number of threads of support which advises: (i) changing some registry keys, which seem to be unnecessary following a procedure of recovering costs of system; (ii) the transfer mode to DMA to PIO on the primary IDE channel in Manager devices, and (iii) the offending disk and IDE/ATAPI controllers Device Manager uninstall followed by a restart of switching. I tried (ii) & (iii) independently several times resulting in Windows Installer automatically the drivers for the hardware newly found followed by a final reboot, but the Enigma DVD persists.

  I tried to install the latest drivers for the DVD RAM driver, including vF103 firmware update in the Toshiba download pages, but the status quo remains.

  Ideas or current symptoms are swinging more and more towards the likely hardware malfunction?

  Thanks for listening...

  For me, it looks like a hardware problem, maybe the lens of the player is not clean or not can not calibrate correctly in the right position

  But try first to remove the drive from Device Manager and restart the laptop.
  The operating system should recognize what it again automatically. If you want to read from this CD, and then try again.

  If she will not change the situation, then I presume that it s a failure of the equipment.

• I have to restart Qosmio F30-127 in order to recognize the inserted disks

  I have the Qosmio F30 127, which has the CARPET * A DVD RW. Very often, however, it does not recognize the fact that there is a disc in the drive. I have to restart for the DVD to recognize the inserted disc.

  If a disc is placed in the slot, shortly after starting it is correct until an attempt to use a different disk.
  This is a common problem or any other agency knows this and if so what is the fix?

  I put t think that it s a common problem.
  Always it is that readers do not each CD/DVD support and sometimes such disorders.
  Try to remove the drive from Device Manager and restart the laptop. After the reboot, the drive should be recognized again. Check if there is no change.
  Check that you have installed the firmware. Maybe a new available on the Toshiba page.