How to use invites OBIEE answers as well as in the dash prompt?

Similar Questions

• Field is in DB/table alias, but I get error ORA904 use in OBIEE answers

  Hello, I am very new to develop tools for RPD and OBIEE, so I'm struggling with something that I thought I did it correctly. I've added a new field in a database table and it can query the database. I've added it to the table of the RPD physical layer and I checked that there is now also in a the table alias. The field of physical table alias is used as the source for a logical column in the presentation layer. Everything looks good in the RPD. But when I try to pull up in a query in OBIEE answers I get a 904 error indicating that the column does not exist. I bounced, servers, deleted cookies and hide them, but nothing helps: I still get the error.
  
  What step I have missed?
  
  Thanks in advance!
  
  Rich

  Hi rich,

  In the physical layer, right-click on the new column that you added and do an update rank of County. If its success, then the column has been imported successfully to the RPD. And we might have to watch layers MDB and presentation, to the question.

  But above all, the error you mentioned occurs when the column is not correctly defined in the physical layer. If my guess is that the number of rows to update will fail. In this case check:
  1. the exact spelling of the column name. All traits underscores are correctly placed and there is no space attack / leak?
  2. the connection pool that you use in the physical layer, is that it points to the same PB in which the new column was actually added.

  Thank you
  Gerard

• How to use invites him back with full screen in XP Mode

  I have software that runs with the DOS prompt. (built by CLIPPER back)

  When I use with XP Mode, I can't do full screen (ALT + ENTER) mode

  What should I do?

  Thank you.

  I have software that runs with the DOS prompt. (built by CLIPPER back)

  When I use with XP Mode, I can't do full screen (ALT + ENTER) mode

  What should I do?

  Thank you.

  Hello

  I suggest that you post this message in our Windows 7 virtualization Forum

  This is where the MP Mode experts answer questions.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to use a parameter query to select and display the data in the table of the façade

  Hiiiiii

  I am using Access 2007 database
  I want to select the specific data in the database using control of the chain as 'select product, size, weight of ProductInfo where barcode (chain control) =?'  and also display the same table of façade.

  I use the connected database toolkit.
  I saw the example of the parameterized insert, but it did not help to use parameterized select query, as well as to display data of parameterized select query.

  I looked for example on parameterized select query, but I don't have any.
  So pls guide me how to do this. I would like to know the other method (if any) that the use of parameter query to perform the same thing.
  If possble pls share a vi reference.
  Thank you!!!

  HII szewczak
  Thanks for the reply
  but I did not getsolution in one of your shared links
  My problem is solved. There is no need to use the parameter query to select control values
  In my case I want to display data from database where bar code is even entered by the user
  I use the data function DB TOOL CHOOSE and create the condition of chain based on concatenation of strings

• OBIEE answers - excluding lines without affecting the overall totals

  Is there a way to exclude lines after grouping in the report to OBIEE answers but without affecting the total general?

  Example:

  Product group real Plan

  --------------------------------------------------

  Furniture 50 100

  200 100 devices

  Tehnology 300 0

  ------------------------------------------------------

  400 150 total general

  Lets say we want to remove the display since no sales technology was made, but we want to let the expected value.

  Table should look like:

  Product group real Plan

  --------------------------------------------------

  Furniture 50 100

  200 100 devices

  ------------------------------------------------------

  400 150 total general

  When you use the steps in selection, total general will be modified (reduced to 200)

  Is it possible to exclude from the ranks (Group) of the analysis, but to keep its values in the grand total?

  If your "total" is produced by OBIEE when allow you it in a table view or rotate view not really.

  Look at this static total without affecting the filters

  He asked exactly the same (and some possible solutions are stationed there).

• How to use data recovery in memory of "D"? The computer did not contain a wrioter of C/D, so I couldn't make a recovery disk.

  How to use data recovery in memory of 'd' (about 10 GB)?

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask your manufacturer of computers for the EXACT method to restore to factory settings.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• How to use develop/Tone/Auto on several pictures at the same time?   v.1.4

  How can I use develop/Tone/Auto on several pictures at the same time?

  Highlighting multiple photos and clicking on it did not work for me, if I can get it to work on a single photo at a time.

  Method 1:

  1. Go to the develop module
  2. Select the photos in the camera roll.
  3. Hold down the Ctrl key and click on the Sync button. He turns to auto sync.
  4. Now, whatever you do develop apply to all photos.
  5. Click on auto sync once more to turn off autosynching.

  Method 2:

  1. The display of the grid of Goto.
  2. Select the photos.
  3. Press Ctrl + U.

• How to use SQL or another way to check if the assets have been post GL?

  Hi all:
  I wan to ask, how to use SQL statements or any other way to check iif assets have been post GL?
  
  
  my environment is oracle 11.5.9
  
  
  
  
  
  
  Concerning
  Terry

  to create entries and transfer to GL
  assets: -.
  (1) (log N entries)-> standard
  (2) complete the setting and submit.

  to check if the assets have been post GL
  Journal:--
  (1) magazines-> Enter
  (2) in the form of research journals Source LOV, select 'Assets', then enter
  (3) you will find all transferred assets (Addition or depreciation) magazines, and the status of the batch is (Unposted), then review and Post

  Published by:! ALotfy September 2, 2010 08:54

• How to use Microsoft wireless receiver 700 v2.0 on the Mac book?

  Hello

  I have been using the Microsoft Wireless 700 receiver v2.0 on my laptop of Lenovo X 68 and docking station with WinXP for several years. I am in the process of upgrading to a Macbook Pro and would like to know how I can get this wireless keyboard/mouse to work on the Macbook.

  Thank you

  Kitenge

  Hello

  Make sure you have the right software for devices

  http://www.Microsoft.com/hardware/en-us/downloads

  If you are having problems using this troubleshooting

  http://support.Microsoft.com/kb/838398/en-us

• How to use [evdo] Dial up and WAN (LAN) at the same time?

  I have an EVDO USB Modem that connects as a dial-up connection,

  also have a connection(LAN/WAN) always on broadband.

  Whenever I connect my EVDO USB Modem (dial-up)

  LAN goes dead until the break of the dial.

  I want to use both at the same time, how can I use the modem for some applications specific torrent client, download accelerator or any other application without disconnecting from the local network?

  I want my LAN always on where I can use my dial up as additional connection for some applications. Give me a tweak or tool for this.

  Please help me it is very important to me...

  and I had read a previous post but it not me helped

  My win xp sp3 operating system

  Hey Er. Rohanmangal,

  It is not possible to have two fittings together. You can use a connection at a time.

• How to use my D-Link router to wash away the connection to my external wireless card... Help!

  Here, I'm desperate. OK, here's my situation.

  I am running Windows XP.

  I live as a result of basement of a House and my PC connects fine to the internet wireless on the floor, BUT my XBOX and PS3 do not have a strong enough to reach range. Sometimes it does, but 90% of the time it doesn't.

  My PC connects to the router on the floor using a D-Link Wireless USB card, I got. Nothing complicated but it works.

  Now, is it possible that I can use this connection and share it so that I can plug my XBOX and PS3 into my own own router D-Link so they can infiltrate the connection my PC is using the floor?

  Help, please. I'm running out of ideas and I don't know how to understand this.

  Hello

  The 524 is rather an old device.

  It is a cheap wireless router (better than the 524) that can be flashed and do it.

  http://www.Newegg.com/product/product.aspx?item=N82E16833320026&cm_re=asus_wireless_router-_-33-320-026-_-product

  ----------

  WARNING - I have no connection with brands that manufactures network devices (or other hardware) of any kind, or no connection with the computer hardware vendors. My comments are like a repository based on material I buy with my money.
  It is provided as is without any warranty and not an entitlement.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to use windows 2008 R2 as a bone to the horizon 5.3 office

  
  Hello

  I'm currently testing the use of windows 2008 R2 SP1 as a desktop OS. But I don't have a lot of information how I can use it.

  Can I create a pool of win 2 k 8 machines or otherwise how can I use it.

  I sent this article to configure the server, but no idea how I can use it in the display manager.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2057605

  Can someone help me with this please?

  Concerning

  Sindhu

  Yes you can, once installed and configured, create you a pool as usual.

  You can reference this guide in how to do it:

  http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF

• How to use different colors or shape BOF markers inside the map?

  I'm building a CRG app to view the GPS location based using google maps and oracle. I want to use markers with different colors to show several locations with the card. But I'm not able to change the color or shape for the available marker. Can anyone provide another option (such as custom marker) to achieve the same?

  However, you can use different images as follows:

  Note the use of 2 labels different pointLocation/marker in pointDataLayer.

• [After Effects] How to use "Convert Vertex Tool" for several vertex at the same time?

  Hey guys,.

  I used the "Convert Vertex Tool" to create a curve on a step of stairs and by mistake it curve all the point of my staircase which is what I wanted to do but point by point. I didn't know it was possible to point (s) at the same time.

  And now I keep it again. I want to convert all the points as a curve at the same time.

  If someone has the magic shortcut, please let me know.

  See you soon.

  

  It's all using the right tools.

  1. Select the layer with the path
  2. Select the tool pen (g)
  3. Press and hold Ctrl/Cmnd and place the cursor on any part of the path to select - you will see a solid filled small arrow
  4. Release the Ctrl/Cmnd key and move the path tool, so you can drag a selection around the verticies
  5. Hold Down the Ctrl/Cmnd key to reveal an arrow small white selection
  6. Drag your selected verticies
  7. Release the Ctrl/Cmnd key and press the Alt/Option key to reveal the convert vertex tool
  8. Click on any vertex to change linear to Bezier or vice versa

  This allows you to convert all the selected vertices. You can't click and drag, but you can convert it to a symmetrical set of Bezier curves.

• How to use AS3 to hide a bar reading of the skin?

  I would use a skin of overlay on a flash with an imported video project. Video occupies the entire window, so the skinAutoHide attribute doesn't work, because the mouse leaves the window until the skinAutoHide feature comes into play. I found this code snippet which hides the bar reading as soon as surveys of the window mouse:

  vpl.skinAutoHide = false;

  stage.addEventListener (Event.MOUSE_LEAVE, hideSkin);

  stage.addEventListener (MouseEvent.MOUSE_MOVE, showSkin);

  function showSkin(evt:Event=null):void {}

  vpl.skinBackgroundAlpha =. 01;

  VPL. Skin = "SkinOverPlaySeekMute.swf";

  }

  function hideSkin(evt:Event=null):void {}

  vpl.skinBackgroundAlpha = 0;

  VPL. Skin = "";

  }

  VPL is of course is replaced by your instance name.

  This solution works fine until I click on the icon to maximize the window . Now the play bar is stuck in the visible state because the mouse is more left the window. I read about the solutions that involve placing a buffer around the video and enabling skinAutoHide pixel, but it does not work if the user moves the mouse quickly out of the window.

  The same poster of the above posted code a second part, which was supposed to hide the skin after several seconds of inactivity of the mouse.

  vpl.skinAutoHide = false;

  var LastMouseMove = getTimer ();

  var MouseStill = false;

  stage.addEventListener (MouseEvent.MOUSE_MOVE, function(ev:MouseEvent) {LastMouseMove = getTimer () ;});)

  var MainCheckLoop = setInterval (function () {}

  If ((getTimer () - LastMouseMove) > 1000) {}

  {if(MouseStill==false)}

  hideSkin();

  MouseStill = true;

  }

  } else {}

  {if(MouseStill==true)}

  showSkin();

  MouseStill = false;

  }

  }

  (}, 1000);

  stage.addEventListener (Event.MOUSE_LEAVE, hideSkin);

  stage.addEventListener (MouseEvent.MOUSE_MOVE, showSkin);

  function showSkin(evt:Event=null):void {}

  vpl.skinBackgroundAlpha =. 01;

  VPL. Skin = "SkinOverPlaySeekMute.swf";

  }

  function hideSkin(evt:Event=null):void {}

  vpl.skinBackgroundAlpha = 0;

  VPL. Skin = "";

  }

  I don't get any errors from the compiler, but my screen is empty (and I did remeember to change the name of vpl.skin in my name of skin and name my vplinstance).

  However, I get an error of output: Error #2044: skinError unhandled:. Text = Error #1009: cannot access a property or a method of a null object reference.

  If I can get this working, I think it would be the best solution.

  Can anyone help?

  Thank you!

  Peter

  You should have a single listener what a listener function.  within this function, you must test to see whether or not you want to make visible skin:

  stage.addEventListener (Event.RESIZE, resizeF);

  function resizeF(e:Event):void {}

  {if(stage.displayState=="fullscreen")}

  VPL. Skin =' ';

  } else {}

  VPL. Skin = "SkinOverPlaySeekMute.swf";

  }

  }