How to use data recovery in memory of "D"? The computer did not contain a wrioter of C/D, so I couldn't make a recovery disk.

Similar Questions

• Compaq Cq61. Windows 7. How to use 3 recovery disks?

  When I bought, I made 3 as recommended HP recovery disks. Now, I want to use them, but can't see how. I tried to start with #1 load - no joy. I also tried the option Start button/F11 on UTube. That no longer works.

  I read earlier Q and has but none seem good enough to me. Any advice would be welcome.

  Thank you.

  Hello:

  Have disk 1 in the PC and turn on the PC. From the beginning of the HP welcome screen, press the F9 key to start the start time menu.  Select the DVD player.  Press the return key.

  If the drive is good, you will see a message on your screen that says in essence... Attempt to boot from DVD... Press a key to boot from the DVD...

  Press a key and the recovery disk should start working.

  Then simply follow the instructions on the screen.

  If that does not work, then you probably have a few bad discs and you will need to order a series of HP.

  Or if you can read the product key of MS of W7 of 25 characters on the bottom of your PC, you can make your own regular installation of W7 media.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• How to download pictures from a memory card to the computer on the new Officejet 8500 has more?

  I recently replaced an old printer HP psc 2410 photosmart with a new Officejet Pro 8500 has more printer.  The installation went fine without error messages, and it will print, scan and copy very well.  When I insert a memory card into the slot, the printer itself recognizes files and displays them on the LCD screen and offers to print.  BUT... what I want to do is to download the files on my PC (Windows XP), and I can't understand how do!  There is no program of HP that appears and offers to transfer the photos as with my old printer.   I also expected to see the map locations shown as a removable disk, as I did with my old printer, but I don't see them.  In addition, my Photoshop Elements program does not recognize the card slots to be.

  Then it dawned on me that my computer 'sees' map locations because it is not connected directly to the printer!  I created this as a wireless printer and I am totally new to this, so sorry if this is a stupid question... but there no way to transfer files from the PC card slot in a wireless configuration?  I'm totally confused...

  Hello

  If your printer is connected to the network or wireless network, you must access it through the IP address.

  Find the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.

  Open Windows explore and type \\xxx.xxx.xxx.xxx"where xxx.xxx.xxx.xxx is the ip address of the printer.

  You will see the memory card slot there.

  You can do a "map network drive" to it if you want your printer card slot to be registered permanently.

• iPhone 6plus iOS 9.3.5 since the last update my touch screen is freezing. Has yet to be decided. Connection to the computer did not help. I had to wait my battery died to restart. Once restarted I could use touchscreen but it now

  Aggravated with the update from my iPhone

  It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5.

  1. A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phone has rebooted.
  2. Since this restart my touch screen hangs for 5 minutes at a time at least 5 times per hour.
  3. My screen goes completely black 20 seconds in the reading of an article. I have to refresh my browser at least 6 times by reading an article on the web.
  4. If I'm in iBook I can't read yet a page without the screen goes black. I hit the home back to iBook button try to keep reading where I left off the coast, but within 20-30 seconds it goes back to black.
  5. While I'm typing, even this message, I hit the button of the space and the words are charged or inserted which does not appear. I myself taking much time to type anything bc I have to go back and get rid of the words that the phone has decided to him only to change or insert.
  6. Improvements that never going to this last day f__d my phone. Difficulty what you did in the last updated bc I will eventually lead to an Apple Store and throw the phone home.

  What have I tried to fix it. Everything. For many in the list and you already know what the normal things are that the average person would be difficult it phone. I have no problems until I updated to iOS more recent so caused my problems of telephones you people. PLEASE FIX NOW

  Thank you

  Debbie

  I posted my severe issue with the iphone since the last update August 28, 2016 at 12:27 and watch to see when your system has declared that I posted my question that I call a problem so I guess you can add that to my problems too. OH nothing automatic record is

• How to use product recovery CD-rom?

  How to use product recovery cd-rom on the satellite A40 range?

  Hi Daniel,.

  To use the recovery CD, simply insert the first CD (assuming there are two) in the CD drive and then just turn on your laptop while pressing the 'C' key on the keyboard. This will cause the laptop to load a minimal operating system on the CD that will start the process of recovery of the product.

  You should also be an initial menu that asks you if you want to do a complete system restore or restore 'Expert'. The full restore will delete all of your 'C' drive and will then install the entire system (excluding all the extras you'll have to install afterwards). The recovery of 'Expert' will allow you to partition your hard drive before you install the operating system in the C"" drive.

  Kind regards

• How to use several adf 12 shape and insert the form data in to table during the click on "submit" button

  How to use several adf 12 shape and insert the form data in to table during the click on "submit" button. Can we use several form from adf or not?

  Make sure that you dragged the VO based EO.

  Also make sure that the VO attributes based EO Updatable property.

  The query according to VO is used only to add LOV to the column of the original VO ModelId.

  See you soon

  AJ

• How to get system recovery disks

  original title: need to erase my hard drive to get rid of a virus, but the laptop did not come with disks in the system, because they were already installed on the laptop. What should I do?

  I bought a laptop computer three years ago and I had very little trouble with it. But recently, it has become very slow, even though I have plenty of hard drive on the left. When it's built in wifi suddenly stopped one day, that I took it to the geek squad in PC World, who told the driver he had been uninstalled and who, after having worked on my laptop and see how slow and it was slow, it was probably the result of a virus.

  I was told my only option to remove potential viruses was to back up my files and wipe my hard drive for all files. I was quoted £60 for this service so I went home and saved the files I wanted to keep on my laptop hard drive. I wiped my old PC hard drive before you delete the virus and I could then reinstall Windows and the built in programs using records systems. However, I bought this new laptop and all programs have been preinstalled and came with no system disk.

  What is the best way to go on my hard disk wiping programs and files without Windows, or should I just pay PC World to do properly?

  Thanks for the help :))

  When you clean your hard drive, it is wiped away.

  You must reinstall Windows during this process.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I'm recovering using vista recovery disks.

  I'm tring to get using vista recovery disks, after disc 2 is done, it comes out saying there is lack of disk space for the temporary files needed for the operation. It said that windows was able to start and tells me to insert the windows installation disc, choose the language and click on repair computer. Status 0xc000000e code, the boot selection failed because required device is inaccessible. How can I get out of it and what to do next?

  Hello

  First question is why have you tried to do a recovery?

  You may have a hardware problem or on your recovery media may be corrupt.

  See you soon.

• I have windows vista and I had to use my recovery disk, but an error came as it ended. I tried to use the menu options of recovery but now she plays as if I had no drivers. What should I do?

  I used my recovery discs and some sort of error came. so, it has not fixed the computer. so I think that some how drivers were not loaded. However what seems to be a driver came when I press my f12 button to use the system recovery options menu. but I insisted on using it, and another box came to tell the software installation media or something to use to load the drivers. I also tried to use the Startup Repair tool restore and system by surprise that I have on an external drive listed under windows backup care but nothing has worked. I don't know anything else to do.

  1. Open the 'computer '.
  2. Right-click on the drive in question
  3. Select the tab "Tools".
  4. In the error-checking box, click .

  Well you can suffer the consequences of not running it who are often worse. CHKDSK found and try to
  repair disk problems, it does not really create them.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• It will not play a video cd due to 'insufficient memory' I closed the programs on the taskbar - did not help! What can I do... or how to clear the memory?

  I am running Win 7 on my emachine, and this is the first time, he will not play a video cd due to 'insufficient memory' I closed the programs on the taskbar - did not help!  What can I do... or how to clear the memory?  anyone?

  Hi Ernie,.

  First, you use any type of applications to run your videos?

  Also check links theses below, you may find them useful. (Click on it)

  How to prevent out of memory problems

  A guide to increase the speed of your computer

  I hope this helps.

• Re: Satellite L355D - how to create a recovery disk?

  I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

  Thank you

  You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

  Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• How to use Quicktime Player 7 Pro registration for second computer? View order history goes back only 18 months. When I enter my key QT7 he just told me to buy again.

  How to use Quicktime Player 7 Pro registration for second computer? View order history goes back only 18 months. When I enter my key QT7 he just told me to buy again.

  You need a separate license for each Mac.

• My system crashed and now I just get the blue screen that says to reinstall windows, when I try to use my recovery disks that it won't work.

  Is there anywhere to get a new copy of the system recovery disc for my windows vista computer.  I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows.  The recovery discs that I burned when I bought the computer do not work.  What are my options?

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  With HP normally press you F11 at startup to start the process of recovery from the recovery partition

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  If the problem persists with the recovery process, contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  or try HP support froums

  http://h30434.www3.HP.com/

• Can we use Office default memory offline if the customer does not have enough free memory?

  Can we use Office default memory offline if the customer does not have enough free memory?

  Yes. We can use the parameter offlineDesktopDefaultMemoryScaleupValue jointly with the offlineDesktopReportedHostMemoryValue parameter in the registry.

  For example, if your client system has 2 GB of memory and the desktop view is configured to require 2 GB of memory, you won't be able to check the desktop view because low memory is also necessary for visualization of hosted customer.

  Use the parameter DesktopReportedHostMemoryValue = 2048 registry offline, so that you can go to the desktop and use the registry parameter offlineDesktopDefaultMemoryScaleupValue = 1024.

  so that the desktop view uses only 1 GB of memory when run locally.

  Reg patch: HKCU\Software\VMware, Inc. \VMware VDM\Client\disableOfflineDesktopMemoryScaleup

  Note: If it's a small environment you can do manual. Or we can simplify this activity by creating a group policy.