How to use multiple operating systems on my M40-244?

Hello
I have a M40 244 with Windows XP, but I would like to install Windows98SE and XP.
Can it be done? Guidelines to give me?
Thank you
Pete

Hello

in general there is no problem to install Windows 98 SE on a second partition on your hard drive. But you will have problems to find the drivers for this operating system, because it is not supported by Toshiba for this model. You must also bring.

Good luck!!

Good bye

Tags: Toshiba

Similar Questions

  • How to install multiple operating systems

    Hi, im from the India,
    I have hp Pavilion-15-N209TX, with Windows built-in 8.1,
    I want to install anothere os (Windows 7),
    Windows 8.1 Windows 7 plus several operating systems.

    How to do this?

    Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

    The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

    You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

    After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

    If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

    In addition, as the hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

    I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

    From the top...

    (1) in Windows 8 / 8.1, reduce the "C:" partition and create a new partition of the unused space. Please see partitioning and naming of readers (Windows 8) for more information on partition in Windows 8 / 8.1.

    (2) download f6flpy-x 64.zip, extract the files/folders and place it on a USB Flash drive.

    (3) turn on the computer and immediately start typing the key "ESC".

    (4) when the MENU is displayed, press "F10".

    5) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

    6) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

    7) press "F10" and click "YES" to "Exit Saving Changes".

    (8) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

    (9) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

    (10) turn on the computer and immediately start typing the key "ESC".

    (11) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

    (12) select 'Language', ' time / currency ' and 'Keyboard' settings and then click "Next".

    13) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

    (14) you may need to provide Intel SATA/RAID drivers at the moment...  Use the Intel SATA/RAID drivers that you previously placed on a USB Flash drive.

    (15) to follow all instructions and meet the need. Enter the Windows 7 key when asked.

    Most of the 64 - bit drivers Windows 7 for HP ENVY 15 t-j100 CTO Notebook PC drivers of Quad Edition page should work on your computer. DO NOT use any BIOS or download of the firmware from this page. Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

    HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

    The printer works at all with this cable?

    The cable has recognized and installed by Windows XP when you logged on to the computer?

    If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?

    You get an error message?  If so, please provide, without paraphrasing.

    This printer has already been installed on this computer?  If so, with what type of connection?

    And especially, what is the brand and model of the USB to parallel cable?  Many of them do not work.  See, for example, the comments here , which suggests that 25% of the units will simply not work.  This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.

  • How to detect the operating system to PDF using javascript

    Hello

    How to detect the operating system to PDF using javascript. (Javascript console)

    Thanks in advance.

    App.Platform will return "WIN", "MAC" or "UNIX".

  • Can someone tell me how to upgrade the operating system on the MacPro?

    I have a MacPro1.1 which works fine, but now I can't use LightroomCC on that because the OS is no longer supported. Can someone tell me how to upgrade the operating system on the MacPro?

    Your Mac Pro 2006 supports only as high as Lion unless you use a hack.

    If you want Lion then order a code to download here:

    http://store.Apple.com/us/product/D6106Z/A/OS-x-lion

    and then use the code in the Mac App Store.

    If you need higher that the Lion then Google for the hack

  • How to load the operating system of split hard drive D of Aspire5315?

    OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

    How to load the operating system of split hard drive D of Aspire5315? -step by step please.

    Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

  • How to install two operating systems on a single computer

    Original title: windows

    How to install two operating systems on a single computer, xp and windows 7... ?

    Hello

    Thank you for contacting Microsoft Community.
    For the installation of two Windows OS (called Dual Boot), you first determine what exactly the BONES. Based on this, you can proceed to install the oldest operating system first, then installing the latest OS. Here, in your case, Windows XP first and then Windows 7.
    If you change the order, the latest version of Windows will not work correctly.
    In addition, you can use Virtual PC or VMware to use Windows XP in Windows 7. Windows XP Mode is another version of Microsoft which allows you to use Windows XP in Windows 7 through Virtual PC. You can download Windows XP Mode from here:
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
    To install Windows XP Mode, you must have Windows 7 Professional or higher, with hardware virtualization enabled in your PC (you should check in the BIOS of your PC). If you prefer Windows XP Mode, you don't have to install Windows XP in the above mentioned way. It installs like any other program on Windows 7.
    Note that if you have Windows 7 Edition Home Premium or lower edition, you can try Windows XP using Virtual PC/VMware or dual-boot.
  • How to deal with operating system windows 8.1 and apps on usb device

    Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

    Hello Mohan,

    Thanks for posting your query in Microsoft Community Forum.

    I can of course understand the situation and will be happy to help with your query.

    Let me ask you;

    • You have the key product for Windows 8 or 8.1?

    You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

    You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

    As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

    You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

    You can follow the steps below to create installation media.

    1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.
    2. When you are prompted to run or save the file, choose run

    3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

    4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

    5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

    To create a USB flash drive

    1. Click on the USB flash drive.

    2. Plug the USB key into a USB port on your PC.

    3. When you are prompted, select the USB key that you want to use, and then click Next.

      If you have files on the USB flash drive, it will remove them.

    To create a DVD

    1. Click on the ISO file , and then select the location where to save the ISO file.

    2. Insert a blank recordable DVD into your DVD drive.

    3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

    Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

    You can also read the article below to create a USB stick recovery.

    Create a recovery USB disk

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

    Thank you.

  • How to use as operator for several values

    Hi all

    I want to obtain the column values for the column - filed_name which ends by ('X 1', 'X 2' 'X 3' 'X 4' 'X 5' 'X 0' 'XA' 'XB' "XM" "XP" 'X' "CM" "MT") of the variable_info table


    I tried to use as shown below

    SELECT * FROM VARIABLE_INFO WHERE FieldName like (' %x 1 "," %X 0 ");

    but getting error
    ORA-00907: lack of right parenthesis

    can someone tell me how to use as operator for multiple values?

    Thank you/kumar

    You need not a subquery, just make sure that you use parentheses to group your GOLD requirements

    SELECT RELATION ,
    FIELD_NAME ,
    ATTRIBUTE ,
    FIELD_DESCRIPTION,
    SOURCE
    FROM VARIABLE_INFO
    WHERE RELATION NOT IN ( 'CHAI',  'ITAB', 'ITB2', 'ITB3', 'MINI', 'NOTE', 'MINC', 'FINI', 'FTIM', 'FWTG', 'FMLY', 'FMIS', 'FSUM', 'MEMB' ,'FINC', 'FASO')
    AND (SUBSTR(FIELD_NAME,-2) in ('X1', 'X2' ,'X3', 'X4', 'X5', 'X0', 'XA', 'XB', 'XM' ,'XP' ,'CM','MT')
      OR substr(FIELD_NAME,-1) in ('X')
      OR substr(FIELD_NAME,1) in ('J')
      )
    AND (ATTRIBUTE LIKE 'NUM%' OR ATTRIBUTE = '-') ;
    

    The error you are getting sounds like a problem with the definition of VARIABLE_INFO. It seems the synonym or something that it points to rear edge

    For example:

    CREATE SYNONYM X FOR DUAL;
    CREATE SYNONYM Y FOR X;
    CREATE OR REPLACE SYNONYM X FOR Y;
    SELECT * FROM Y;
    
    SQL Error: ORA-01775: looping chain of synonyms
    

    Kind regards
    Bob

  • Equium A200 - how to get the operating system?

    Hi, my son has just been given an A200 and we put in place a new disk hard in, but we do not have the recovery disks. Anyone know how I could get my hands on copies or how to download the operating system and then is just a matter of inserting the disc?

    Tony

    Hey Buddy,

    First of all I must say that it of not possible to download the operating system. It s just preinstalled on your laptop and you can find it on Toshiba Recovery disk as well.

    If you don t have a recovery disc, you can order one from Toshiba but I m not 100% sure if it of possible old Equium A200. Just check the online store:
    https://backupmedia.Toshiba.EU/landing.aspx

    If you can t order it, ask a service provider authorized in your country. Maybe they have such a disc and can give you.

  • How to upgrade my operating system to Yosemite on a MacBook Air running Lion 10.7.5? I don't have 2 GB of free memory.

    How to upgrade my operating system to Yosemite on a MacBook Air running Lion 10.7.5? I don't have 2 GB of free memory.

    Assuming that you previously purchased on the app store and your Mac meets the minimum requirements, unload you enough data on an external drive to free the necessary disk space and update via the app store. If you buy before it and it is not in your shopping list, you do not have.

  • I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

    I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

    Thank you

    Dee

    Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

    J W Stuart: http://www.pagestart.com

  • I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

    I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

    Download and install the last set of drivers (starting with the chipset / driver motherboard) to the ASUS support site: http://support.asus.com/download/options.aspx?SLanguage=en&type=1

    J W Stuart: http://www.pagestart.com

  • How to find what operating system, I am running on my computer?

    How to find what operating system, I am running on my computer?

    Click Start > right click on computer > properties > system > it will tell you it.

    See you soon. Mick Murphy - Microsoft partner

  • How to change the operating system Windows7 from English to Spanish

    How to change the operating system from English to Spanish

    Hi Emmy,

    I suggest to follow the steps provided by TrekDozer of the link below and let know us the status of the issue.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-i-change-Windows-7-Home-Premium-from-English/7977f5f2-b579-4905-a3bc-955705920e46

    I hope this helps.

Maybe you are looking for