How to install multiple operating systems

Hi, im from the India,
I have hp Pavilion-15-N209TX, with Windows built-in 8.1,
I want to install anothere os (Windows 7),
Windows 8.1 Windows 7 plus several operating systems.

How to do this?

Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

In addition, as the hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

From the top...

(1) in Windows 8 / 8.1, reduce the "C:" partition and create a new partition of the unused space. Please see partitioning and naming of readers (Windows 8) for more information on partition in Windows 8 / 8.1.

(2) download f6flpy-x 64.zip, extract the files/folders and place it on a USB Flash drive.

(3) turn on the computer and immediately start typing the key "ESC".

(4) when the MENU is displayed, press "F10".

5) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

6) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

7) press "F10" and click "YES" to "Exit Saving Changes".

(8) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

(9) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

(10) turn on the computer and immediately start typing the key "ESC".

(11) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

(12) select 'Language', ' time / currency ' and 'Keyboard' settings and then click "Next".

13) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

(14) you may need to provide Intel SATA/RAID drivers at the moment...  Use the Intel SATA/RAID drivers that you previously placed on a USB Flash drive.

(15) to follow all instructions and meet the need. Enter the Windows 7 key when asked.

Most of the 64 - bit drivers Windows 7 for HP ENVY 15 t-j100 CTO Notebook PC drivers of Quad Edition page should work on your computer. DO NOT use any BIOS or download of the firmware from this page. Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

If you have any other questions, feel free to ask.

Please click the 'Thumbs Up' white LAURELS to show your appreciation

Tags: Notebooks

Similar Questions

  • How to install two operating systems on a single computer

    Original title: windows

    How to install two operating systems on a single computer, xp and windows 7... ?

    Hello

    Thank you for contacting Microsoft Community.
    For the installation of two Windows OS (called Dual Boot), you first determine what exactly the BONES. Based on this, you can proceed to install the oldest operating system first, then installing the latest OS. Here, in your case, Windows XP first and then Windows 7.
    If you change the order, the latest version of Windows will not work correctly.
    In addition, you can use Virtual PC or VMware to use Windows XP in Windows 7. Windows XP Mode is another version of Microsoft which allows you to use Windows XP in Windows 7 through Virtual PC. You can download Windows XP Mode from here:
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
    To install Windows XP Mode, you must have Windows 7 Professional or higher, with hardware virtualization enabled in your PC (you should check in the BIOS of your PC). If you prefer Windows XP Mode, you don't have to install Windows XP in the above mentioned way. It installs like any other program on Windows 7.
    Note that if you have Windows 7 Edition Home Premium or lower edition, you can try Windows XP using Virtual PC/VMware or dual-boot.
  • How to use multiple operating systems on my M40-244?

    Hello
    I have a M40 244 with Windows XP, but I would like to install Windows98SE and XP.
    Can it be done? Guidelines to give me?
    Thank you
    Pete

    Hello

    in general there is no problem to install Windows 98 SE on a second partition on your hard drive. But you will have problems to find the drivers for this operating system, because it is not supported by Toshiba for this model. You must also bring.

    Good luck!!

    Good bye

  • I just built a PC from scratch, how to install an operating system (Windows 7)?

    So I have a blank hard drive and bios only upward on the screen. How to install Windows 7? I read it must install iso using a USB key or drive, and then enter a product key, but I don't know. Help!

    Yes you can.

    The store should provide the opportunity for this link to create a bootable usb key or dvd:

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  • How to install two operating systems?

    win xp install

    All microsoft can do is talk talk talk you don't give any info how do you just say now with windows xp you can install two os on your computer. Worthless!  How are you stupid?

    Please see:

    Create a system for Windows 7 multiboot

    How to Dual Boot Windows 7 with XP or Vista

  • How to install an operating system on a virtual machine using the ISO file?

    Hello

    I use vmware workstation version 6. I have different kinds of opersting systems likeFedora, Ubuntu, Windows xp CD to install on my virtual machines using the CD-ROM drive.  . I want to know is possible to install a virtual machine via an ISO file?

    Thank you

    mypass

    Yes

    Click on "Menu" > "new" > "virtual machine".

    Click on "Customize."

    Select "next".

    Select "install-disk (iso)".

    Click 'Browse '.

    the rest is explained

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    original title: reinstall Windows Vista

    I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

    http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

  • Not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system

    HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?

    If F9 does not run the diagnostic, then most likely to replace the hard drive.  Once the new drive in place, start the recovery DVD series that was made when the PC was new.  If you do not make them, or they are lost, order a new set of HP.

    See here: http://support.hp.com/us-en/document/bph07143

  • Drive hard dead - new drive installed no operating system - XP key for that computer is portable hard disk newly installed?

    Changed the bad disk to another - XP key will transfer fees drive installed and how to make xp on the fresh drive?

    Sure. Just use the XP installation CD you used to install the operating system the first time. Or, if you have an OEM machine with a restore to original image:

    Most of notebooks and OEMs (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

    These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25.

    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

  • When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

    Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

    Original title: used to install Windows 7

    Disconnect any other (additional) internal hard drives and external USB devices.
    Look for any loose hard drive power or cables SATA, graphics card or other power cables.

    First run Memtest86 +:
    It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test:
    If you do not know your readers of the brand and model, try "Speccy",.
    It provides information from the computer/system in detail:
    OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
    Note: Option RAM indicates number of slots, DRAM Timing.
    Works your memory speed (frequency). The nominal frequency of your memory.
    http://www.Piriform.com/Speccy

    Test your player - create a Bootable CD:
    Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
    Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

    Test your drive with the car manufacture utility.
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
    (bootable CD) and check bad sectors.
    SeaTools for information: http://www.seagate.com/support/downloads/seatools/
    SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
    SeaTools for DOS download:
    http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

    Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    Also check Home Edition free Partition Wizard option "Test of disc surface":
    http://www.partitionwizard.com/free-partition-manager.html

    J W Stuart: http://www.pagestart.com

  • can I install an operating system on my ram?

    I went through a lot of posts on how to do that, people just give fancy words in huge paragraphs, that's the only problem I have not been able to address, I mean, Ive got a lot of things in my pc just by reading a few posts. but this, increasing the operating speed of my pc by like 1000% is too hard to resist, but I've never met a detailed procedure. It would be great if I get a link to a video that comes of showing me how to do the same thing, a break step by step what to do also would suffice.

    Ask yourself, "Can I install an operating system on my ram?"

    Microsoft does not provide a way, or he takes it somehow, to install one of its operating systems to any volatile storage device. This includes RAM any form or configuration.

    For a moment, we suppose you could do: as soon as power was removed from the unit, all contents are lost. So, the installation will have to be repeated the next time you want to use the computer.

    See an overview of what makes setup in place. The Windows DVD is put in the DVD player and Setup copy a base to HD image and preparing it for use. Control passes to the newly created system and a detection phase begins which determines the hardware in the computer uses and assembles a special computer image on the hard drive. The system restarts and uses the custom image. (The actual process may require several reboots and download files from the Internet, if a connection is available). At the end of the installation, there are on the hard drive an image of the operating system working together customized for this computer. Whenever the computer starts, it loads its core working together. How much is loaded depends on the amount of RAM available. Manager windows memory must take into account / meet the requirements of the programs started and run as well as the background as networking, memory of the file transfers to the use of system and application, & c.

    Perhaps you would be worth considering the use of SSD devices or hybrid rather than or in addition to the HDs ordinary.

    Tom Ferguson

  • Install the operating system after replacing the corrupted hard drive Asus q500a

    The hard drive on my Asus Q500a is bad (he had checked the repairman). They told me that I could replace it (it will just keep failing until at last it dies just) but I have to re - install the operating system. The laptop comes with Windows 7 and I upgraded to 8 when it came out (I think). I don't have a recovery disk.

    How can I replace the corrupted hard drive and re-install the operating system?

    If I need to buy Windows 8, where can I find?

    Would it not easier that I left the repair shop handle it?

    Thank you in advance.

    Hi Kristi,

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    According to the description, I understand that the problem with you want to reinstall the operating system after replacing the hard drive corrupted on the system.

    Certainly, I understand your concern and will try my best to help you.

    I suggest you check the suggestions contained in the Microsoft link below and check if this is useful.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/replacing-hard-drive-and-re-installing-Windows-8/e8dbfc81-5294-4c94-9276-0f36e0a66e59

    In addition, you can see the suggestions in the link given below.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/reinstall-Windows-8-after-the-operating-sytem-has/30d47e63-296b-4466-ae9d-4628084541dc

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

    Jayant

  • How to deal with operating system windows 8.1 and apps on usb device

    Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

    Hello Mohan,

    Thanks for posting your query in Microsoft Community Forum.

    I can of course understand the situation and will be happy to help with your query.

    Let me ask you;

    • You have the key product for Windows 8 or 8.1?

    You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

    You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

    As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

    You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

    You can follow the steps below to create installation media.

    1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.
    2. When you are prompted to run or save the file, choose run

    3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

    4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

    5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

    To create a USB flash drive

    1. Click on the USB flash drive.

    2. Plug the USB key into a USB port on your PC.

    3. When you are prompted, select the USB key that you want to use, and then click Next.

      If you have files on the USB flash drive, it will remove them.

    To create a DVD

    1. Click on the ISO file , and then select the location where to save the ISO file.

    2. Insert a blank recordable DVD into your DVD drive.

    3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

    Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

    You can also read the article below to create a USB stick recovery.

    Create a recovery USB disk

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

    Thank you.

  • Can someone tell me how to upgrade the operating system on the MacPro?

    I have a MacPro1.1 which works fine, but now I can't use LightroomCC on that because the OS is no longer supported. Can someone tell me how to upgrade the operating system on the MacPro?

    Your Mac Pro 2006 supports only as high as Lion unless you use a hack.

    If you want Lion then order a code to download here:

    http://store.Apple.com/us/product/D6106Z/A/OS-x-lion

    and then use the code in the Mac App Store.

    If you need higher that the Lion then Google for the hack

  • Pavilion: Boot Device not found install an operating system from hard disk (3F0) hit administrator 69599233

    Device not found Boot Install an operating system press F10 to reset factory and she request password have my pw does not give me the code 69599233

    Hello

    Thanks for posting in the HP Support forum. Welcome Onbord!

    Regarding the admin code you have give, please keep the power button hold for a while until that the PC stops. Repeat using the power button and

    as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter boot HP like this menu:

    Press F10 to enter the BIOS and when it asks for password, please enter this code 76491815 to ENTER.

    Follow the on-screen instructions to change the password or delete.

Maybe you are looking for