How to use my scanner Agfa snapscan 1212u with W7?

Similar Questions

• Why can´t I make my scanner AGFA SNAPSCAN 1212U work properly, in my windows vista 32 bit

  original title: why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?

  Why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?

  Hi Søren benaceur

  
  You have compatible installed the drivers for the scanner working properly?

  There don't seem to be compatible drivers available for the scanner to work with windows vista. I suggest you try to install drivers available for windows XP in compatibility mode on Windows Vista and verification.

  http://static.Agfa.com/digicam_scanner_drivers/scanner/snapscan_1212u/index.html

   

  So to work around the problem, try to install the drivers for Windows XP in Windows Vista compatibility mode and check if you are able to solve the problem. Compatibility mode may or may not work depending on the specifications of the device.
  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists while you can contact the manufacturer for assistance without a driver, the device may not work properly. Also, pilots can only be provided by the manufacturer of the device.

  I hope this helps.

• How to use the scanner as a scroll

  Hello

  I have lenovo e40-70, how to use the scanner as a scroll wheel?

  This issue has developed before and unfortunately the software Lenovo does not support.

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.

  I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.  When I use their "fix", it turns out that my screen blue and green. Aid others?

  Your support for the product is unfortunately - the manufacturer of the product.

  Suppose you tried everything here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=306884&prodTypeId=18972&ObjectID=c00802504

• Scanner Agfa SnapScan isn't getting recognized

  Hello:

  I have an Agfa SnapScan e50 Scanner installed very well under windows XP (32-bit) and Windows 7 (64 bit) does not even recognize that it exists. What is different about Windows 7 drivers installation instructions does not correctly install the drivers? Or is it the fact that I use the 64 bit version of Windows 7?

  Thanks in advance for your help.

  Sparky

  Agfa only supports this scanner up to Win XP. There is no official driver for Windows 7, which is what you really need.

  You should try the following:

  1. download the lates http://forums.nvidia.com/index.php?showtopic=102344&st=0 XP drivers
  2. right click on the downloaded file and select troubleshoot compatibility.

  You have to accept that your analysis is now obsolete, however.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• How to use the scanner Canon of my computer with Windows Vista?

  How to use the Canon Scanner of my Toshiba with Windows Vista computer? Need help, tq.

  How to use the Canon Scanner

  http://www.ehow.com/how_5796443_use-Canon-flatbed-scanner.html

  I would propose Canon Support and the knowledge base for information and manuals

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support

• I DON'T KNOW HOW TO USE THE SCANNER

  I HAVE A HP PHOTOSMART 5514 AND HAVE NEVER USED THE SCANNER.  I NEED TO KNOW WHERE TO INSERT THE DISK MEMORY.

  Thank you

  You have solved my problem.  Thank you very much.

• How to use the kit sensor Bioinstrumentation Vernier with NI ELVIS II and LABview on a CPU?

  So I have the NI ELVIS II + and a box full of Bioinstrumentation sensor, including Kit sensors: Analog Proto board connector (s), pressure sensor, hand dynamometer, hand grip monitor heart rate, EKG sensors, Surface temperature probe, among others.

  I can't seem to get all the sensor data to my PC that I use, I'm not too familiar with electrical circuits but I followed the manual directions for the specific sensor but it seems as if it doesn't have a difference. I'm with copper son crochet and so that they know the places appropriate (according to the manual) but nothing.

  Am I missing something? I have also the is open regardless of the specific LABview laboratory (Surface Temp lab for example), but when I press run it is as the sensors are not recognized or even be recognized. The sensors are plugged into the connectors on the analog Proto Board also. What I am doing wrong, and how can I get these sensors to work?

  Any help will be greatly appreciated.

  From what I see, it looks like a typing mistake in the manual.

  Try to connect GND AI0 - and NOT ALWAYS.

  It should look like this.

  Connect the following pins for wire connector:

  1. AI0 + SIG1 analog connector Proto Board

  2. + 5V power supply DC to 5V analog Proto card connector

  3. Power supply to the GROUND to GND of the analog Proto board connector

  4. AI0 - GND of the analog connector Proto Board

• How to use the sim card that comes with my thinkpad tablet 3G version?

  I got my tablet from newegg and my Tablet comes with a sim card AT & T, how to use this map? I have to go to the AT & T sign a contract and activate store? I'm in the United States
  Thank you!

  At & t will put you on a laptop data plan which is more expensive than a plan of "ipad." If you can, find an IMEI of an Ipad and use the sim card number and the IMEI number of the Ipad for you sign up for a plan of cost reduction. Call them to implement. Using an online form or walk into a store At & t will be very frustrating.

  PS: it is there no contract that your device is not supported by anyone - you own. It will be a month of service. If you don't sign up, free of charge.

  What, the bonus is a kick butt gps integrated 3G wwan card. Enjoy!

• How to use the diagnostic utility equipment HP with Windows 8?

  HP just put on a great video that will show you how to use HP Hardware Diagnostic Utility in Windows 8.  This utility can be used with some HP printers to determine what is the problem with the hardware.  It can help clarify many common hardware problems.

  Download and run the utility of Diagnostic equipment of HP (HDU)

  I hope this helps.

• LJ m1120MFP and MacOS 10.7.3 - How to use the scanner? Is this possible?

  Scanner is not located in the system. Printer works fine. The driver version is 1.3.0.261

  Just to add, the product indeed no longer scan while using Lion, you will find also listed by the document of support for HP below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02925114#A2

  To work around the problem, try checking any 3rd party scanning solution like Vuescan, that support the scanner.

  It will be useful,

  Shlomi

• How to use Recovery on satellite Pro L10 with DVD drive broken?

  Hello...

  I have a satellite Pro L10, which is virused. I need to recover Windows. Unfortunately, I can not, because the CD/DVD drive is borked.

  I tried everything until and including the purchase of a laptop adapter HD, but my desktop computer is not a Toshiba so he does not have the recovery disk.

  I've never had to use a "recovery disk" before, so I have no idea how it works - apparently there should be a folder on my hard drive recovery? can someone tell me where I could find it? (I'm quite familiar with the innards of my installation of Windows and have never noticed before). Also, is it possible that this native recovery file has been compromised by my virus?

  Default: can it be fixed using an installation of LAN, and if so, could someone point me to instructions? (My BIOS allows booting from LAN, but not USB, which is irritating).

  Any other suggestions would be welcome.

  Thank you.

  Hello

  First of all you will not be able to use the Toshiba Recovery disk if you cannot use the CD/DVD drive.
  Why? Because you need to boot from the CD of recovery if you want to install windows from the CD from Toshiba.

  You ask how to boot from LAN?
  Well friend; I doubt that you will be able to do.
  First of all that this could be possible only if you have a RIS server.
  The Remote Installation Services can be installed optionally on Microsoft Windows 2000 Server, Windows Server 2003 or Windows Server 2008.

  It's really complicated and not easy for someone who has never done.
  If you want you can google a little how to create REEFS but in my opinion it s advisable to buy and compatible CD/DVD drive because the STRANGE can also be used for other purposes

• How to use the time of 80 MHz with the example of the soul base angular Position-buffer-Cont-Ext Clk.vi

  Hello:

  I use the card PCI-6602 and am a bit new to the use of timer/counters.  I use the Commission to measure the position of a quadrature encoder.

  I would use the time base internal 80 Mhz the map of 6602, but examples of LabVIEW will not allow that.  In the example, he States:

  2. call the DAQmx Schedule VI (sample clock) to configure settings of clock synchronization external sample Mode Sample and sample clock Source.  The sample clock Source will determine when a sample will be inserted into the buffer.  The 100 kHz, 20 MHz and 80 MHz time bases can serve as the sample clock Source.  The Edge parameter can be used to determine when a sample is taken.

  Is it possible to use the database internal time for my application?

  I have attached the example vi that I use.

  Thank you.

  Pat

  Hi, Pat.

  

  The rate determines how fast the samples are acquired and put on the material buffer.  This value depends on the basis of time, which is specified by the source of the VI DAQmx calendar entry.  The default source on the PCI-6602 map is the on-board clock (80 MHz).  The rate must be a divisor of the source.  For example, 80 MHz, 40 MHz, 20 MHz, 10 MHz,..., would be acceptable values for the entry rate.

  So the answer to your question would be to remove the entry from the source and ensure that the rate is a factor of the source.  Leaving this entry unwired will use the clock shipped by default of the unit, as shown in the screenshot below:

  

  I hope this helps.

  

• How to use a structure of the event with a state machine

  
  

  I don't know exactly what you're asking, but it sounds as if you want a bunch of script tests and if the user says stop, to immediately stop the current test and abandon others?  I'll assume you know how to clear the table so that it will not abandon the others, so I guess that you have wrong to abandon the current test?  If it is indeed the case, the problem is that you are not able to spread the message of the VI FP main which is the GUI for the sub vi which is the test where the test may or not have a GUI (FP visible) of its own.  Threading is the first thing to come to mind, but it will be may not need the use of events.

  You can do this by passing a refnum of the stop button to the Subvi, where you can then add to wait to the structure of business event.

  I have attached 2 screws, mainvi.vi which is just a loop displays the number * 2 (number of seconds since the race) to be called subvi.vi and then check to see if the button is pressed.  mainvi.VI is in no way a state engine, it's just a simple loop for demonstration purposes.  subvi.VI just waits 2 seconds and leaves, this is a better engine State structured with an init State to start a case of survey to wait events and an exit status to clean.  You can change everything as you wish so that he can do what you want.  You will notice that even if subvi.vi is running, it will automatically end when you press the stop button.

  I hope this helps.

  A