How to use the kit sensor Bioinstrumentation Vernier with NI ELVIS II and LABview on a CPU?

Similar Questions

• How to use the time of 80 MHz with the example of the soul base angular Position-buffer-Cont-Ext Clk.vi

  Hello:

  I use the card PCI-6602 and am a bit new to the use of timer/counters.  I use the Commission to measure the position of a quadrature encoder.

  I would use the time base internal 80 Mhz the map of 6602, but examples of LabVIEW will not allow that.  In the example, he States:

  2. call the DAQmx Schedule VI (sample clock) to configure settings of clock synchronization external sample Mode Sample and sample clock Source.  The sample clock Source will determine when a sample will be inserted into the buffer.  The 100 kHz, 20 MHz and 80 MHz time bases can serve as the sample clock Source.  The Edge parameter can be used to determine when a sample is taken.

  Is it possible to use the database internal time for my application?

  I have attached the example vi that I use.

  Thank you.

  Pat

  Hi, Pat.

  

  The rate determines how fast the samples are acquired and put on the material buffer.  This value depends on the basis of time, which is specified by the source of the VI DAQmx calendar entry.  The default source on the PCI-6602 map is the on-board clock (80 MHz).  The rate must be a divisor of the source.  For example, 80 MHz, 40 MHz, 20 MHz, 10 MHz,..., would be acceptable values for the entry rate.

  So the answer to your question would be to remove the entry from the source and ensure that the rate is a factor of the source.  Leaving this entry unwired will use the clock shipped by default of the unit, as shown in the screenshot below:

  

  I hope this helps.

  

• How to use the sim card that comes with my thinkpad tablet 3G version?

  I got my tablet from newegg and my Tablet comes with a sim card AT & T, how to use this map? I have to go to the AT & T sign a contract and activate store? I'm in the United States
  Thank you!

  At & t will put you on a laptop data plan which is more expensive than a plan of "ipad." If you can, find an IMEI of an Ipad and use the sim card number and the IMEI number of the Ipad for you sign up for a plan of cost reduction. Call them to implement. Using an online form or walk into a store At & t will be very frustrating.

  PS: it is there no contract that your device is not supported by anyone - you own. It will be a month of service. If you don't sign up, free of charge.

  What, the bonus is a kick butt gps integrated 3G wwan card. Enjoy!

• How to use the diagnostic utility equipment HP with Windows 8?

  HP just put on a great video that will show you how to use HP Hardware Diagnostic Utility in Windows 8.  This utility can be used with some HP printers to determine what is the problem with the hardware.  It can help clarify many common hardware problems.

  Download and run the utility of Diagnostic equipment of HP (HDU)

  I hope this helps.

• How to use the DPS for a daily with as wordpress content management system

  Hello

  I use the DPS for magazines.  I would like to use urgent for a media company.  the content will be in the form of such as wordpress content management system, joomla.  I know that I can download html in pages content.  How can I display content such as the New york Times and the Washington post on iPad using digital publishing suites?

  Hello

  Please send me a private mail (ktukker at_sign adobe d o t - com) with your question and description of the workflow. Can you give me some links to sample from the Washington Post / NYT that you talk too much?

  You can associate a workflow HTML with DPS. Take a look at the application of Shell scenarios; content has all be created in the HTML articles.

  Shell scenarios: https://itunes.apple.com/nl/app/scenarios/id605820338?l=en&mt=8

  -Klaasjan

• How to use the find method to search for character format substitutions and FMP?

  I strongly suspect that I should be able to use the find method to search for paragraph substitutions and format as these options are available in the Find dialog box. However, because of the excruciating Extendscript documentation from Adobe, I not was able to find the key pieces of information that I need. I found these constants:

  • Constants.FV_FindPgfFormatOverride
  • Constants.FV_FindCharacterFormatOverride

  But he has literally no information about them. It is not yet a definition, so I'm actually just a guess. However, I think that I need to somehow use these constant within the parameters of the Find method. Any ideas on how to do it?

  You're right, there are still some bugs to work out of the documentation, although it has already improved since I started w / Extendscript last summer.

  Find two constants must be defined as the ival for a PropVal FindObject, for example:

  var myDoc is app. ActiveDoc;

  var docStart = myDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  tloc var = new TextLoc(docStart,0);

  var findParams = AllocatePropVals (1);

  findParams [0].propIdent.num = Constants.FS_FindObject;

  findParams [0].propVal.valType = Constants.FT_Integer;

  findParams [0].propVal.ival = Constants.FV_FindCharacterFormatOverride;

  myDoc.Find (tloc, findParams);

  Depending on what you're trying to accomplish, you can also take a look at the property FormatOverride of the Doc, bmp and item objects.

• Tecra M5: How to use the FN + F2 fast locking with external keyboard keys?

  When to use a docking station and the keyboard of the UBS, the function key ("Fn + F2") on my tecra M5 as will not work. The USB keyboard has a Fn key, but when you press on with F2 nothing happens. Can I lock the screen another way?

  Usually, by default the FN keys work only on the internal keyboard.
  If you want to use the function key FN keyboard USB external, you must first activate this function FN.
  This function, you can enable in the Toshiba HWSetup located under the control panel.
  Here, you will need to select the keyboard tab and assign a function to the FN key on the external keyboard Fn key window.

  Hope this works

• How to use the search otherwise condition as

  Oracle 9i
  
  Hi all
  
  I work in the management of control here, we have a table named as OE_ORDER_LINES_ALL and the name of the column called UPI, and its length is 16 tank.
  
  Now the customer has the UPI with 13 tank and now, I need to check if all the IPUS are in the table.
  I have almost 600 of the UPI and I can't able to use as an operator. Y at - it one option other than as an operator.
  
  For example
  
  Resemble UPI this 050 009714373007G, but the customer gave this G 009714373007.
  
  Is there a UPI then I would use like this
  
  "Select upi in oe_order_lines_all where the upi as ' 009714373007 G %.
  
  If there is more than 2 UPIs how to use the search condition
  
  Any help is highly appricatable
  
  Thanks and greetings
  Srikkanth.M

  If you know that you will benefit from a number of values of UPI 13 characters and you should look for if there are rows in the table that match the 13 first characters

  select upi
    from oe_order_lines_all
   where substr(upi,1,13) IN( '009714373007G', <> )
  

  Justin

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• How to use the detector face on the screen lock

  I HAV a lenovo tab

  I want my lock screen for face detection, but I can't lock

   

  Hi Hirukhadka,

   

  Thanks for posting your question in the community of Microsoft Windows.

  It appears from the description of the problem, you want to know how to use the detector face on locked in your Lenovo tab.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  To help you solve the problem, I would appreciate if you could answer the following questions:

  1. What is the Lenovo tab model number?

  2 are you trying to lock your computer using face sensor?

  You need to contact your manufacturer regarding your screen using the face detector, blocking as this is a feature on your Lenovo tab.

  For more information:

   

  Contact Lenovo Support:

  http://shop.Lenovo.com/us/landing_pages/contact/

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• With no headphone jack, how to use the iPhone in my car 7

  Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

  So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

  Thus, looking for ideas that might have people.  I can't be the only one with this concern.

  It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• How to use the Print Screen function?

  I've seen various descriptions of how to use the print screen function.

  It would be nice to actually tell one that works.  None have worked for me.

  [Fn] and Prt SCr does not work.

  CTRL and Prt SCr does not work.

  CTRL, Alt, and Prt SCr does not work.

  [Fn], Ctrl and Prt SCr does not work.

  If anyone knows the correct method to activate the screen capture function which would be a good thing.

  From the looks of things, HP has a big problem with this function.

  Here's a microsoft articleon the use of the screenshot function.

  This should answer your questions.

  Thanks for taking a peek.