How to use sharing of family - app still ask for money

Similar Questions

• How to use multitouch in Webworks app?

  Hello!

  After my first problems in the development of the app for BB in Webworks I still made my app. I have to use multitouch now, but I have no idea how. I did find samples with multitouch. I found only this: http://developer.blackberry.com/html5/apis/touchevent.html#targetTouches but I don't know how to use this function. Can you help me?

  PS. Sorry for my bad English

  And that's that

  The following example is an implementation of filling of touch

  I decided to leave the bind to the mouse in that it is probably useful to others

  It is a living example of an ePub with blow gettures reader and touch

  The code is a little complex, so I will answer any other than Gregs Qs

  Basically what this did that target an iFrame and control

  Anywhere you see a reference to my target frame - ignore it and replace with what you want to do

  The hardest things to understand for the novice, here are the angle and the time (both are included)

  Without much explain this sets @ high tell the manager what to do

  A call to bindtouch (target) does what it says but is native, you must pass the name of the div tag

  A binding triggers all important events

  Angles and timing are still developing

  Timing is crucial if you need one no doubt

  Angle is optional and depends on how the finger is moved, but requires a JS call very expensive Math.atan2 (point1, point2)

  Basically Angle you indicate where you moved your finger after the first touch so you can probably kill such things

  The County touch gets the correct contact and doing what it takes with it based on defines it

  Look - I told you it was very complicated

  Oh - bind it to the mouse allows you to transfer the call to a mouse event - I thought it might be useful for other readers

  The target an iFrmae is also very convenient as it is scrolling

  I leave you for that suit your needs

  function bindtouch (target) {}
  var TOUCH_TAP_DIST = 30;
  var TOUCH_TAP_TIME = 150;
  var TOUCH_DRAG_DIST = 50;
  var TOUCH_DRAG_TIME = 500;
  var TOUCH_DRAG_VELOCITY = 50;
  var TOUCH_SWIPE_DIST = 50;
  var TOUCH_SWIPE_TIME = 500;
  var TOUCH_SWIPE_VELOCITY = 75;

  var SWIPE_NONE = 0;
  var SWIPE_RIGHT = 1;
  var SWIPE_UP = 2;
  var SWIPE_LEFT = 4;
  var SWIPE_DOWN = 8;

  var _TOUCH_DRAG_VELOCITY = TOUCH_DRAG_VELOCITY * TOUCH_DRAG_VELOCITY;
      
  var touch = [];

  var el = target;

  function squangle (p1, p2) {}
  ((p2.y-p1.y) return math.atan2, (p2.x - p1.x));
  }

  el.addEventListener ('touchend', Function {}
  e.preventDefault ();
  var TB = e.changedTouches;
  for (var i = 0; i)
  CTI var is ct [i] .identificateur;.
  CTO var = ct [i];
  {if (CTO. ClientX)}
  Touch [sic] = {sx: cto.clientX,}
  SY: cto.clientY,
  TX: cto.clientX,
  Ty: cto.clientY,
  BX: cto.clientX,
  by: cto.clientY,
  PV: 0,
  {TM: e.timeStamp};
  var id = "#tch" + ct;
                  
  evt var = document.createEvent ("MouseEvents");
  evt.initMouseEvent ("mousedown", true, true, window,
  0, cto.screenX, cto.screenY,.
  cto.clientX, cto.clientY, false, false, false, false, 0, null);
  e.srcElement.dispatchEvent (evt);
  }
  }
  });

  el.addEventListener ('touchmove', Function {}
  e.preventDefault ();
  var TB = e.changedTouches;
  for (var i = 0; i)
  CTO var = ct [i];
  TCO var = touch [cto.identifier];
  var ms = e.timeStamp - tco.tm;
  {if (CTO. ClientX)}
  TCO. TX = cto.clientX;
  TCO. Ty = cto.clientY;
  TCO. PV = Math.sqrt (((tco.sx-tco.tx) * (tco.sx - tco.tx)))
  + ((tco.sy-tco.ty) * (tco.sy - tco.ty)));
  if(e.touches.Length == 2) {}
  dreadful var = e.touches.length;
  }
  if(e.touches.Length == 1) {}
  var dx = Math.abs(tco.bx-tco.sx);
  var dy = Math.abs(tco.by-tco.sy);

  If (tco.pv< _touch_drag_velocity)="">
  If ((smode == SCALE_ZOOM) & (fsize > 1.00)) {}
  $(frames['appframe'].document).scrollLeft ($(frames['appframe'].document).scrollLeft () + (tco.sx - tco.tx));
  //                            }
  EB var = $(frames['appframe'].document);
  St var = eb.scrollTop ();
  $(frames['appframe'].document).scrollTop (st + (tco.sy - tco.ty));
  .SX Touch [i] = e.touches [i] .clientX;
  .Sy Touch [i] = e.touches [i] .clientY;
  }
  }
                  
  TCO. SX = cto.clientX;
  TCO. Sy = cto.clientY;
  }
  }
  });
              
  el.addEventListener ('touchstart', Function {}
  e.preventDefault ();
  var TB = e.changedTouches;
  for (var i = 0; i)
  CTO var = ct [i];
  TCO var = touch [cto.identifier];
  var ms = e.timeStamp - tco.tm;
  var dx = Math.abs(tco.bx-tco.sx);
  var dy = Math.abs(tco.by-tco.sy);
  evt var = document.createEvent ("MouseEvents");

  If ((dx< touch_tap_dist)="" &&="" (dy="">< touch_tap_dist)="" &&="" (ms=""><= touch_tap_time))="">
  evt.initMouseEvent ("click", true, true, window,
  0, tco.sx, tco.sy, tco.sx, tco.sy, false, false, false, false, 0, null);
  e.srcElement.dispatchEvent (evt);
  }
  ElseIf (((dx > TOUCH_SWIPE_DIST) |)) (dy > TOUCH_SWIPE_DIST)) & (Mrs.<= touch_swipe_time))="">
  if(DX > TOUCH_SWIPE_DIST) {}
  If (TCO. BX > TCO. SX) {}
  swipex = SWIPE_RIGHT;
  }
  else {}
  swipex = SWIPE_LEFT;
  }
  }
  else {}
  swipex = SWIPE_NONE;
  }
                      
  if(dy > TOUCH_SWIPE_DIST) {}
  if(TCO.by > TCO.) SY) {}
  swipey = SWIPE_UP;
  }
  else {}
  swipey = SWIPE_DOWN;
  }
  }
  else {}
  swipey = SWIPE_NONE;
  }
                      
  If ((swipey == SWIPE_NONE) & (swipex == SWIPE_RIGHT))
  {
  switchPage (1);
  }
  If ((swipey == SWIPE_NONE) & (swipex == SWIPE_LEFT))
  {
  switchPage(-1);
  }

  evt.initMouseEvent ("mouseup", true, true, window,
  0, tco.sx, tco.sy, tco.sx, tco.sy, false, false, false, false, 0, null);
  e.srcElement.dispatchEvent (evt);
  }
  else {}
  evt.initMouseEvent ("mouseup", true, true, window,
  0, tco.sx, tco.sy, tco.sx, tco.sy, false, false, false, false, 0, null);
  }

  }
  });
  }

• How to use the font family in WebWork.

  Hi all

  I want to use different font family in webwork.

  Please send any suggestions.

  -------------------------------

  Tom Sandra

  This post presents a solution with the example source code and all:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/Indian-local-font-support-in-bla...

• OIM11gR2ps2 how to use OID - 11.1.1.6 Connector for updating a user that has been created through LDAPsync?

  Hello

  I have two connectors configuration, a database connector generic to an Oracle database that the provisions of a user account (it works fine). The second connector, I am still getting set up properly is a LDAP connector specifically OID - 11.1.1.6.0.

  Use case:

  A user creates an account through automatic recording and is created simultaneously in OUD ldap with the johnDoe1 username. johnDoe1 connects in IOM and asks an instance of application called DBAccount. They fill out the application in all there information (user ID, fname, lname, phone, address, title, etc.). Once they support demand goes through the necessary approvals and after that it's approved successfully the info is put in service to the database. Once this operation has been successful, I would like to provision an update a users ldap entry that was created in the custom attribute ldapsync is called OUDappusername, this attribute is an attribute with value mutli because if demand for the other apps, they will be updated in the OUD aswell. This OUDappusername will be generated by an event handler or to pre-populate the plugin and the format will be "app |" user name' where app is the app they ask and User_name is the user name they use to connect to the IOM, for example "DBAccount". johnDoe1. If they keep asking other apps they will be updated in the OUDappusername so that they may have DBAccount | johnDoe1 and ask another application called app2, then they will also have app2 | johnDoe1 and so on.

  Is this possible with the connector and how do I set it up to users update rather than set up a new account in the OUD?

  The question:

  I currently have the configuration of connector so whenever I have set up a user creates a new user rather than allow me to simply update a user. It is possible to configure the connector for updating existing users is born through ldapsync, rather than those created through the app instance configuration. I have found no documentation on that.

  Thanks in advance,

  J

  Edit #1 - I changed the wording and added more details.

  Edit #2 - I reworded my question to be more specific and focus on a single issue and changed the title to be more specific.

  Post edited by: 6d986dc3-6c9b-401d-9892-76032e7a1e05 on April, 07/04/2014

  Hello

  I just wanted to post what we found the answer. We did not use the connector, but what we did was we created a custom, adapter, which is a small and associated java class then new task in the process definition for the database resource in the console design and we made calls to jndi for the ldap Protocol to update this attribute multivalue. It was very quick and easy and could be tested before the implementation of the IOM. Thanks again for all the help and talk me through the procedures.

  Thank you

  J

• Why some thinapped apps still asking serial number when you try to move them to another OS?

  Hi all, I noticed that some applications still require a serial number (even if they have been supplied correctly before packaging) when they are moved to another OS?

  Iinteresting waiting for an interesting answer question, thak you all.

  Short answer:

  Because the company that made the software has invested some time to ensure their income...

  Long version:

  There are various reasons why the serial number can be lost/invalidated. Usually (more common) it is because during the installation, a fingerprint of the system has been filed and the software has detected that the system is no longer one that you've installed the software on. This can be a very simple (as the name of the computer) to the complex (os type, NIC MAC address, CPU ID, a serial... OS) validation. At some point, the software determines: enough is enough, I don't trust it more.

  This problem existed before ThinApp or any other virtualization were introduced. Until a few years ago, it was common to "phantom", a role the same image on all systems in a company and system. Microsoft Office XP has been the finest example of an application of all uses and who did not like this mode of distribution. System admins had re - activate all systems in him the original CD.

  Other blighters are servers that monitor how system uses what license and "trackers use' preventing you to reset the sandbox (using the account don't match no more on a server/local).

  I hope that answers it. There are a lot of reasons, but it is most likely...

  Kind regards

  Michael Baars

• Windows still ask for activation after that laptop was RMA would be

  My laptop has been recently would be RMA and they replaced the motherboard, keyboard and VGA card. Shortly after receiving this return, Windows began to ask for an activation code. Unfortunately, I didn't write mine down, and the sticker is now faded and illegible. I sent my new laptop because that's what the OEM has asked that I do and they replaced my HARD drive and installed Vista fresh. It does not solve the problem at all.

  Without my original activation code, I don't think I can reactivate Windows. Is there anyway to recover my product key or how to contact Microsoft to get a new one? Because it seems that through my OEM drives me nowhere as they want me to RMA again.

  If your Vista operating system was running, and enabled, we could have helped you recover your product key.
  Unfortunately, this does not apply.

  I'm sorry, but we cannot help you, you don't have a legible label on your laptop...

  It is the responsibility of the OEM to support you.

  See you soon.

  Mick Murphy - Microsoft partner

• How to use ken burns in a still video image?

  I have a video clip. I move the playhead to a point in the clip and split the clip. I then do a freeze frame of the end of the first part of the split clip. This is where I met my problem. During the reading of the judgment on image, I want to zoom in on a region of the freeze frame, for example a face in a crowd, I want to stay zoomed in for a period of time and then zoom out to full frame, and then continue with the rest of the split image.  How can I do this? I tried to use Ken Burns but could not do work, I could zoom in but not hold the zoom, then zoom back.  Thank you.

  To do this, use three consecutive copies of the still image.  Implement effect of the Ken Burn to the still picture to zoom in.  Now add a copy of this clip and reverse images of beginning and end of the Ken Burns effect by clicking on the double arrows in the Style far right button (see screenshot).

  

  Now add a copy of a clip between the two clips and adjust the large frame of Ken Burns while she superimposes one smaller.  This gives you the extended break.  Adjust the length of the three clips and you're done.

  Geoff.

• How to use admob on my apps?

  Hello

  I know almost nothing about the code and let me know if there is a 'step by step' admob to my apps integration guide. Or if theres another way to monetize my apps.

  I'd appreciate your help.

  Hi Paul,.

  Best is to use is the dairy extension Admob native games, it's really good... This works for Android and iOS apps.

  Its easy to integrate in the AS3 code and is well supported by e-mail... .the documentation provided in fact easy to put in place...

  There are alternatives to Admob, but they don't usually have as good geographical coverage, although some pay a little more.

  Vserv.mobi (from Mumbai, India) deserve to be looking - they provide a simple tool of "" Wrapper Ad"for android that puts the interstitial ads at the beginning and end of each app without code being necessary at all. Vserv is good for Asian markets, particularly for China because it does not have any Google code which is prevented from China app store (even on the Samsung). My experience of Vserv is a good one with good support and reliable payment... It complements money admob nicely...

  I hope this helps...

• Old iTunes on the phone of the company accounts have been deleted, but still asked for passwords when updating apps

  How do I completely delete old accounts iTunes from a company phone, so that I can update the required applications? Preference option that does not require a method of removal/reinstall app.

  Thank you

  Apps are always related to the Apple ID and password used to buy. If you want to use an application with a new ID and password, you need to delete and buy with the new code.

• How to use my screen LCD of Qosmio F30 for play on the Playstation 2 using video and the port?

  I plugged my Playstation 2 to my laptop using the plug-in software component video port on the right side of my computer. Everything is in place, but how to move the LCD screen to display Playstation 2? Please instruct me. Thank you.

  Hey Buddy,

  Have you looked into the graphic properties of windows? These properties should be options that usually is activating your software component video plug-in, so you can use your PS2 with your laptop.

  And before I forget: you must use a program that is grabbing the video input and display it on your desktop as intervideo windvr or something similar, check if you have this program.

  Welcome them

• Part of a homegroup, and shared files are still ask for a network password

  Hello

  I'll try to give as much information as I can so that I hope someone can help me with this problem.
  I'm running Windows 8 pro and my other computer has Windows 8 pro.  On both systems, I am running Windows on a SSD, and I share the folders that are on a hard disk of data as well as access to an external hard drive connected to one of the computers.
  Both computers are part of the same homegroup.  Both computers are password protected (at startup).  I use one of the computers and my husband the other use it so all of us, the newspapers in our own computer via our Acct. Microsoft computers also "turn off password protected sharing" selected in advanced sharing settings.  Both computers say that we are the administrator in respect of user accounts.
  My husband can access all my files shared from his computer, generally with no problems, but on occasion, he is invited to "Enter network password" of Windows Security.  I almost always have this problem while trying to access its shared folders and the external hard drive that is connected to his computer.
  
  We have tried to share the folders on your computer in several ways:
  Share with homegroup
  Share with everyone
  Share with >
  with total control over each of them and I get the message that precedes, or sometimes he tells my I can't access this drive.  Also, one thing I forgot is that each of our computers, said that the other user has the credentials in Credential Manager.
  I feel like part of my problem is while the computer says I'm an administrator, I have always problems to the administrator.  When I try to install new software (this happened to me with Dropbox) I had to right click on the .exe and run as administrator.  I also had set my Adobe Photoshop Lightroom on run as administrator under 'Compatibility' for all work processes.
  I am at a loss to know what to do.  I did a clean install with my Windows 8 disk to see if it was only a problem with I've originally set up the system.  If anyone can help, I would be very happy.  I feel like I'm missing just this thing that's right in front of me that I can't because I'm too close to the issue.

  Hi Candace,

  I suggest to restore all security permissions, then check the issue.

  Follow these steps to do so.

  a. open the command prompt by pressing the Windows key + X , and then click on (Admin) command prompt.

  b. typesecedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose and press ENTER.

  I suggest to run Homegroup troubleshooter and check for the issue. It will tell you if there is something wrong in the homegroup connection. See the link to do so.

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Reference:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-8&V1H=win8tab1&V2H=win7tab1

  Let us know the status of the issue. We would be happy to help you.

• How to use subject: config to REMOVE Delta looking for my new tab

  I'm desperate to remove Delta search my the new tab page. What should I do after I opened on: config? I have done it at least a dozen of resets, withdrew DS via Add/Remove, run a virus scan now... it is TERRIBLE and it HAS to be a way to get rid of him. When I do a reset, the new tab page is what I WANT... my saved pages previously. However, when I FF CLOSE and reopen, the new page is, once more, Delta. You can hear me SCREAM? You see my TEARS? I'm really tired. Thanks for getting back to me with a solution that WORKS. JO

  As a member of the Delta to search for the customer.
  I am happy to answer all your questions.
  The removal of our research program is actually quite easy.
  If you use FF, please follow the steps below:

  Write in the address line "subject: config" and press "enter." Confirm the message. Search for "Delta". Right click on the entries, and then click "Reset".
  Please be aware to reset only the entries which contains 'browser.newtab' or 'browser.search '.

  I hope it solved your problem!

  For further assistance please contact us at the support@delta-search.com

• Since iAds is being abandoned should I remove the IAD framework my SDK so that my app still works for users of the app?

  I want to make sure my app users always have a good app experience after the abandonment of the IAD. I currently have iAds framework in my application. Do I have to remove part of my app code IAD before June 30, 2016 to avoid errors of the app or accidents?

  Have you ever heard the answer?

• Batchmodel: How to use the different positions of the switch-for EHR?

  Hello

  I use the Batchmodel OR three EHR. HAD the current number can be read from RunState.TestSockets.MyIndex.

  Can the lot this three EHR. What is the way - OR to use different maneuvers (OR-SwitchExec) to each dut?

  TestPlan is for example

  Configure the DMM

  Put

  Measure

  Turn off the switch.

  Switching is of course different for each Instrument.

  I really should add an if around each switching (= endless work) or is there an easy way that I'm not currently?

  If (RunState.TestSockets.MyIndex == 0)

  DUT1 switch

  Else if (RunState.TestSockets.MyIndex == 1)

  Switch to DUT2

  Else if (RunState.TestSockets.MyIndex == 2)

  Switch to DUT3

  on the other

  end

  Thanks for the tips

  Best regards

  OO

  I wouldn't use either of the prerequisite or if things... It's too much work and I'm lazy.

  I would just use the built in step of switching:

  http://zone.NI.com/reference/en-XX/help/370404G-01/NISE/TestStand/

  Name your routegroups in Switch Executive to match your shooting numbers.

  For example, in the process (s) to connect: box can have the following expression:

  "SigGenToUUT" + Str (RunState.TestSocket.MyIndex)

  And have a road connecting the signal generator to the UUT named SigGenToUUT0.  It would be for USE in socket 0.

  Just a thought!

• How can I cancel an e-mail address that was stolen by someone in the United Kingdom and using it to ask for money in my name. I set up a new email address but it's impossible to get an annulment.

  My email address was stolen from someone in the United Kingdom.  They have changed my password, so I can't enter to cancel.  They also have access to my contacts, and I can't get back them either.  What can I do to get than a cancelled once and for all?  In addition, this person can be tracked and prosecuted?  I had to set up a new address.  I tried going through Windows Live Hotmail, but received no response and I need cancelled now before any more damage can be done.

  Hello

  The feedback Forum is for feedback on the Forums for answers. One of the other answers
  Forums would have been a better choice - see the links directly under the logo of answers
  at the top of each page.

  ---------------------------------------------------------------------------------------------------------------------

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.